TIMED ONLINE AUCTION

LOCATION:  Items will be in two locations.  Location 1 is 5073 98th Ave SE, Marion, ND 58466 and Location 2 is from I-94 Exit 276 (Eckelson, ND), 8 miles south on County Rd 7, 4 miles west on 44th St SE, 4 miles south on 97th Ave SE, farmstead and driveway on west side of road.

OPENS:  FRIDAY, NOVEMBER 11

CLOSES:  MONDAY, NOVEMBER 21

PREVIEW:  Friday, November 11 – Monday, November 21 from 8:00AM-5:00PM

LOADOUT:  Monday, November 21 – Friday, November 25 from 8:00AM-5:00PM.  NO loadout on Thanksgiving Day, November 24.

4WD & MFWD TRACTORS

1974 Versatile 850, 4WD, CAH, 855 Cummins, 12 spd., 3 hyd., 18.4-38 band duals, 7,511 hrs., A/C needs repair, S/N8503050519

2013 Massey Ferguson 2660 HD Series, MFWD, CAH, 8 spd., 2 hyd., 3 pt., 540 PTO, diff lock, grill guard, front fenders, 12.4-24 front tires, 18.4-30 rear tires, 751 hrs., S/N30994BW08018

2WD & COLLECTIBLE TRACTORS & LOADER

1981 John Deere 4440, 2WD, CAH, quad range, 3 hyd., 3 pt., 540/1000 PTO, diff lock, aux. front fuel tank, adj. front axle, 11.00-16 front tires, 18.4-38 rear hub duals, 8,131 hrs., S/N048962R

1979 John Deere 4040, powershift, 2 hyd., 540/1000 PTO, adj. front axle, rear weights, 18.4-34 rear hub duals, 4,073 hrs., sustained tornado damage, S/N004107R

Allis Chalmers 8030, 2WD, 12 spd. powershift, 3 hyd., 3 pt. less 3rd link, 1000 PTO, (9) front suitcase weights, 11.00-16 front tires, 520/85R38 rear tires, 2,109 hrs.

McCormick Farmall M, 2WD, wide front, open station, 5 spd., 2 hyd., 540 PTO, for parts, S/N277308X1

Oliver 770, 2WD, 6 spd., 2 hyd., 540 PTO, fenders, 6.00-15 front tires, 14.9-38 rear tires, clutch is out, S/N178638-036

Oliver 66 Row Crop, narrow front, 4 cyl. gas, 6 spd., 540 PTO, Woods L306 belly mower, PTO/belt drive, fenders, 5.00-15 front tires, 11.2-38 rear tires, S/N428068C66

Koyker Super K loader, 7' bucket, off Oliver 770

COMBINES

John Deere 7701 pull-type, rock trap, chopper, 1000 PTO, 23.1-26 tires, w/John Deere 212 pickup head w/6-belt pickup, wind guard, S/N316520H

John Deere 7700 turbo 2WD, chopper, 23.1-26 front tires, 11.00-16 rear tires, 5,079 hrs., S/N264225H

IHC 914 pull-type combine, 9' pickup, 5-belt, 18.4-26 tires, front 1/2 PTO missing

Case 960 combine, w/13' rigid head, 16.9-26 tires, S/N8340113

Case 960 combine, w/13' rigid head, 16.9-26 tires, for parts, S/N8340112

HEADS & HEADER TRAILERS

2002 John Deere 930F flex head, 30', hyd. fore/aft, poly full finger reel, poly skids, high dam, stubble lights, crop dividers, contour shaft, multi-pt. hookup, S/NH00930F696990

(2) John Deere pickup heads, 12', 6-belt pickup, wind screen, S/N268490H, S/N530767

Minnesota Rugged 8 HD 4-wheel running gear, converted to 30' header trailer

Shop-built 4-wheel header trailer, 24', 15" tires

Shop-built tandem axle header trailer, 6-wheel, 15" tires

SWATHERS

Case-IH 725 pull-type swather, 25', steel bat reel, 1000 PTO, S/N1330124C004019

IHC 75 pull-type swather, 21', steel bat reel, for parts

IHC pull-type swather, 18', steel bat reel, 540 PTO, 6.70-15 tires, less canvas, used for CRP maintenance

John Deere 800 self-propelled swather, 18', slant 6 cyl., wood bat reel, 3" sickle, 7.50-16 tires, S/N290481E

PLANTERS & STRIP SEEDERS

Kinze 2700 pull-type planter, 24x20", front fold, 1.6 bu. fiberglass hoppers w/ext., Dawn row cleaners, screw adj. double spring down pressure, mechanical drive, liquid in-furrow ground drive liquid, tandems on main, corn & soybean plates, hyd. markers, has monitors and ground radar, 255/70R22.5 tires, includes pallet of coulters, S/N750071

John Deere 7000 pull-type planter, 8x30", 1.6 bu. fiberglass hoppers, Dawn trash whippers, screw adj. single spring down pressure, ground drive, (1) spike tooth closer, (4) 70 gal. poly liquid tanks, in-furrow liquid, Yetter spring coulter, hyd. markers, no monitor, S/N118784A

(2) Dakon flax strip seeders

FERTILIZER & GRAIN TENDER

Fertilizer & grain tender, 18'x7', 2 compartment, hyd. drill fill, skid mount

TILLAGE EQUIPMENT

Bourgault 8800 field cultivator, 42', 9" spacing, 3-section fold, full floating hitch, single pt. depth, double spring shank, knock-on spike, (2) hyd. front gauge wheels, walking tandems across, 4-bar harrow, rear hitch, 11L-15 tires, S/N82039

Wil-Rich field cultivator, 42', 7" spacing, 3-section fold, walking tandems across, bolt-on shovels, 3-bar harrow, needs hoses & tires

IHC 45 vibrashank field cultivator, 19', 7" spacing, bolt-on sweeps, 3-bar harrow, singles on main, 14" tires

Bourgault 9200 chisel plow, 42', 12" spacing, 3-section fold, full floating hitch, single pt. depth, knock-on points, double spring shank, walking tandems across, front gauge wheels, 4-bar harrow, rear hitch, 9.5L-15 tires, includes NH3 setup that needs repair, S/N821877

Wil-Rich chisel plow, 32', 3-section fold, 2-bar harrow, for parts

Wil-Rich chisel plow, 18', 12" spacing, hyd. lift, double spring, bolt-on spike, walking tandems, 9.51-5 tires, S/N2409

John Deere 360 swinger tandem disc, 28', 10" spacing, 22" discs, tandems across, mud scrapers, S/N011185A

Oliver tandem disc, 21', 7-1/2" spacing, manual wing lift, spring assist, tandems across, scrapers, hyd. lift

White tandem disc, 21', 7-1/2" spacing, manual wing lift, spring assist, tandems across, rear hyd. coupler, scrapers

Oliver plow, 6x16", spring reset, on land hitch

IHC 770 plow, 5x16", auto reset, 7' trailing packer, 9.5L-15 & 11.5-15 tires, S/N10600000001220

Melroe 400 harrow, 50', auto fold, 5-bar, 7.50-14 tires, S/N2527

Yetter 3530 rotary hoe, 30', 3 pt., 3-section top fold, cab guard, S/N1112

TRUCKS

1980 GMC 7000 single axle, 4 cyl. Detroit, 5&2 spd., 16'x93"x49" steel box, combo gate, roll tarp, rear hitch, 10.00-20 tires, 44,928 miles, runs but no key

GMC General tandem axle, 400 Cummins, 5&2 spd., engine brake, spring susp., 20'x96"x58" steel box, diff lock, rear hitch, 11R24.5 tires, 947,305 miles, No Title, Non-roadable

1966 Chevrolet C60 single axle, 6 cyl., 4&2 spd., 15'x90"x51" steel box, wood floor, hoist, 9.00-20 tires, 35,179 miles, does not run, No Title, Non-roadable

Frontier 20'x96"x54" steel box, hoist, buyer responsible for removal

PICKUPS

2012 Chevrolet Silverado, std. cab, 4.3L V6, automatic, 2WD, cloth interior, power locks, cruise, 8' box, 2" receiver hitch, 255/70R17 tires, 47,552 miles

1978 Chevrolet Scottsdale 10, single cab, diesel, automatic, 2WD, 8' box, cloth, 77,665 miles, No Title, non-roadable

PUP TRAILERS

NOTE:  All sold No Title, Not required in ND

Cockshutt 225 tandem axle pup trailer, 20'x96"x60" wood box, hyd. dump, 7' pole pin hitch, 10:00-20 tires

Tandem axle pup trailer, 18'x96"x54" wood box, hyd. dump, 6' pole pin hitch, 10:00-20 tires

Tandem axle pup trailer, 16'x96"x48" wood box, hyd. dump, hoist, 7' pole hitch, spring susp., 10:00-20 tires, hoist needs work

Single axle pup trailer, 11'x93"x46" wood box, dual hoist dump, 53" pull, drill fill, 8.25-20 tires

Single axle pup trailer, 8-1/2'x82"x27" wood box, hyd. dump, 11L-15 tires

NH3 TANKS

1996 1,000 gal. NH3 tank, on Duo-Lift 4-wheel running gear, 11L-15 tires, S/N779670

1980 1,000 gal. NH3 tank, on 4-wheel running gear, 12.5L-15 tires, S/N119772

1978 1,000 gal. NH3 tank, on 4-wheel running gear, 12.5L-15 tires, S/N239920

HAY & LIVESTOCK EQUIPMENT

New Holland 451 sickle mower, 7', 3 pt., 540 PTO, S/N347494

Rowse double 9' sickle mowers, 540 PTO, hyd. fold, 15" tires

Vermeer 605G round baler, 5' pickup w/5' packer feed roller, 10" & 4" belts, 540 PTO, 6'x5' bale, 11L-15 tires, approx. 250 bales, S/N1348

Vermeer 605F round baler, 5' pickup, 1000 PTO, bale counter, hyd. tie, converging wheels, 11L-15 tires, S/N5293

(3) Farmhand bale stack movers, 26'x139", 6-chain, hyd. lift, walking tandems, 540 PTO, for parts

Big Red feed wagon, 7'x5', 540 PTO, rear auger, 11L-15 tires

GRAIN HANDLING & SEED MILLING EQUIPMENT

2009 Brandt 5000 EX grain vac, hyd. fold 10" auger, 7" inlet, cleanup kit, poly & steel flex tube, 1000 PTO, 225/75D15 tires, 51 hrs., S/N88855

Hutchinson C1600 portable grain cleaner, drum screener, 11'x8" load auger, pencil screening auger, electric motor drives, S/N124070

Batco 1335 FLTD belt conveyor, 35'x13", 7-1/2 hp. motor, 230v, 1 phase, on transport, 205/75D15 tires, S/N131223

Brandt 1070MD swing hopper auger, 70'x10", hyd. lift, 540 PTO, on transport, 215/70R15 tires, S/N44773A

Westfield W80-51 auger, 51'x8", manual lift, 540 PTO, on transport, 6.50-15 tires, S/N00918

Westfield W70-51 auger, 51'x7", belt drive, 8.15-15 tires, on transport

Brandt 735 loadout auger, 35'x7", Honda GX390 electric start motor, 13 hp., hyd. self-contained mover, hyd. cable lift, w/Wheatheart hyd. bin sweep, 205/60R15 tires

Brandt 735 loadout auger, 35'x7", Honda GX390 electric start motor, 13 hp., belt drive, hyd. hookup for bin sweep, 205/75R15 tires

Westfield auger, 15'x4", S/N6158W

Seed milling equipment: Pioneer Fanning Mill Co Viking B2 cleaner; Sears cleaner w/screens; (2) Carter-Mayhew disc separators

SCRAPERS, ROCKPICKER & BLADE

Ashland hyd. dump scraper, 6 yd., front dolly, tandems across, 11L-15 tires, S/N15648

Soil Mover 300WR scraper, 3 yd., hyd. dump, dolly hitch, 7.80-15 tires, S/N1506

Mel-Cam 410 fork-style rockpicker, hyd. fork & dump, 235/70R15 tires, S/NC4118

King Cutter angle blade, 7', 3 pt., trailing wheel

OTHER EQUIPMENT

Cat D6 dozer, open station, 8' blade, 18" steel tracks, for parts

Canola roller, 67" steel drum

Steel box on 4-wheel running gear, 20'x94"x52"

Wincharger 12WPBPT0C generator, 12kw, 540 PTO, 230v, 1 phase

Winpower 20-12 PT2 portable PTO generator, 12kw, 1 phase, 125/240v, 540 PTO, does not run

Portable hyd. power unit: Honda G300 gas engine, 7 hp., electric start, 14" tires

RECREATION

1999 Honda FourTrax 4-wheeler, 4x4, 300 manual, electric start, 23x8-11 front tires, 24x9-11 rear tires, starter is out, No Title

Starcraft aluminum boat, 14', Evinrude Lightwin 4 hp. tiller motor, 30 lb. trolling motor, on Yarbrough single axle bunk tilt trailer, No Title for trailer or boat, S/N949264

TANKS

(2) 1,000 gal. horizontal fuel tanks, Gasboy pumps, auto shut-off handle

500 gal. horizontal fuel tank, Fill-Rite pump, auto shut-off handle

(2) 500 gal. fuel tanks, Fill-Rite pumps

210 gal. fuel tank, on single axle trailer

SHOP EQUIPMENT

Craftsman tool chest w/tools: 6-drawer top, 4-drawer bottom, 3-drawer mid chest, 26-1/2"x18"x47", w/asst. hand tools

Craftsman radial arm saw, 12"

Craftsman table saw on wheels, 10", 48" deck, 1 hp., 115v, 1 phase

Shop-built overhead hoist, 17'x14-1/2', 2 ton chain hoist, on 5" casters

Shop-built hyd. shop press, 23", self-contained hyd. power unit, dual cyl. deck lift, bottle jack upper press, on casters

Shop-built HD drill press

Portable chop saw, 5 hp., 230v, 1 phase

(2) Bench grinders, on shop-built table, w/tools & asst. sockets

Tool chest w/tools: 8-drawer top, 9-drawer bottom, 27"x18"x4', asst. hand tools

(2) Drill presses: (1) Jet 14M, 120v; (1) antique manual drill press w/asst. drill bits, bench vise

Antique drill press, 120v, on wheels

Combination tool bench station: 35"x23"x32", 10" caster wheels; Craftsman belt sander; bench vise; Central bench top drill press; Pexto shear; pipe bender; misc. steel

Antique drill press & chop saw: 1/3 hp., 115v, 1 phase, on wheels; portable chop saw, 1-1/2 hp., 230v, 1 phase

Shop equipment: Lincoln AC225 arc welder w/helmets; bench vise on stand; shop cart

Shop support items: portable tool chest, 18"x12"x38", 2-drawer top, cabinet door bottom; tool cart; 2&3 jaw pullers; wrenches; pry bars; clamps; hammers; service panels; wire; electric grinder

Shop support items: hardware bin, 16"x12"x41"; shop-built cart, 18"x26"; red & white air compressor; shop-built air compressor w/portable air tank

Shop equipment: Craftsman 12" band saw/sander, 1 hp., 115v, 1 phase; shop-built table saw

Shop equipment: storage bench w/antique manual drill press; bench vise; press, 58", w/hardware; Craftsman commercial horizontal band saw, 1/2 hp., 115v, 1 phase

Shop equipment: (2) antique drill presses converted to electric w/bench vises; storage bench, 63"x20"x48", w/asst. hardware

Shop equipment: (3) vises on stands; anvil on stand; clamp stand

Shop support items: floor jacks; bottle jacks; steel stands

Shop support items: gas cans; oilers; grease guns; funnels; misc.

(3) Bench grinders: (1) Clarke 6", 1/2 hp., 120v; (1) Craftsman 8", 3/4 hp., 120v; (1) shop-built grinder

(5) Shop-built hardware storage racks

(2) Shop-built storage bins, 20"H & 80"H, w/asst. parts & hardware

(3) Storage bins, w/asst. hardware

(2) Hardware storage bins & shop equipment: hyd. cylinders; pulleys; pipe fittings; springs; valves; misc. steel scraps; Winner HD shear; tire bead breaker

Shop equipment: Carolina CH-100 engine hoist; 12 ton bottle jack

Shop-built cart, 36"x18"x32", w/asst. hand tools, arbor press, on wheels

(3) Aluminum ladders: (1) Werner 24', 200 lb. ext. ladder; (1) 16' ext. ladder; (1) 9' ladder

MACHINE SHOP EQUIPMENT

Jet BD-920N turning lathe, 3/4 hp., 115v, 1 phase, 18" deck, w/accessories

South Bend turning lathe, 11' bed, 220v, 1 phase, w/accessories

Portable hyd. shop shear & turning lathe: approx. 8" throat, self-contained electric/hyd. pump; shop-built mini turning lathe on cart

Turning lathe on stand, approx. 32" deck, 1/2 hp., 115v, w/accessories

Power & hand tools: drills; saws; grinders; hand saws

FARM SUPPORT ITEMS & MISC.

McCormick Deering hit & miss engine, S/NW3083

Asst. scrap metal w/rack

Misc. equipment to include: Allis Chalmers 811GT riding lawn tractor, 48" deck, does not run; Craftsman 3,500 watt generator, 8 hp., not stuck, does not run

Asst. yard tools: shovels; rakes; post hole cleaner; winch; misc.

DANA & JAY NOOT

Dana, 701.840.2558 or Jay, 701.320.2212

or Brad Olstad at Steffes Group, 701.237.9173 or 701.238.0240