AGIRON WEST FARGO EVENT

LOCATION: Red River Valley Fairgrounds, 1805 Main Ave W, West Fargo, ND. Take exit 343 from I-94 W. 

 AgIron West Fargo Event Map & Times

AUCTIONEER’S NOTE: Auctioneers will run multiple rings with live online bidding. There will be no loading assistance until 2:00 PM. Cars and pickups may enter grounds at 12:00 Noon for self-loading.  

Equipment removal by Friday, August 3, unless other arrangements are made.  Beginning Monday, August 6 equipment can be picked up Monday-Wednesday from 8:00AM-5:00PM with arrangements.  Any items not removed by Wednesday, August 8 will be subject to storage fees of $25.00 per item, per day. Additional loading fees will apply after Wednesday, August 8. Removal by appointment only and upon payment of storage & loading fees. Contact the West Fargo office to arrange for removal or loading assistance at 701.237.9173.

Items highlighted in yellow are additions or changes from the original posting

TRACK TRACTORS

2013 Case-IH 600 Quadtrac, luxury cab, leather, buddy seat, 4 hyd., return flow, F&R diff lock, integrated auto steer, Pro 700 display, 372 receiver, HID lights, clear view caps, rock box, 36" tracks, 2,154 hrs., S/NZDF138377

2008 Case-IH 535 Quadtrac, powershift, deluxe cab, buddy seat, 4 hyd., 1000 PTO, integrated auto steer, no display or receiver, front & rear diff lock, 30" tracks, clear view caps, 2,600 hrs.

2009 Challenger MT765C Ultra Wide, powershift, 4 hyd., return flow, 3 pt., quick tach, large 1000 PTO, Trimble 750 auto steer, cloth seats, sub-woofer, remote power mirrors, full set front suitcase and idler weights, New 25" standard ag tracks, 4,676 hrs., S/N0266

John Deere 8420T, 16 spd. powershift, 4 hyd., power beyond, return flow, 3 pt., quick hitch, large 1000 PTO, auto steer ready, ClimaTrak, 16" tracks, (22) front suitcase weights, 5,500 hrs., S/NRV8420T903182

4WD TRACTORS

2011 Case-IH 400HD, ISO, deluxe cab, leather, powershift, 6 hyd., return flow, power beyond, large 1000 PTO, remote power mirrors, HID lights, inside rear wheel weights, 480/80R50 factory hub duals, 4,700 hrs., S/NZBF125934

1992 Case-IH 9280, powershift, 4 hyd., EZ-Steer guidance, 20.8R42 triples, 70% tires, 7,507 hrs., S/NJCB0028443

1982 Versatile, CAH, 855 Cummins, 12 spd., 4 hyd., John Deere ATU & wiring, 20.8R38 duals, approx. 12,000 hrs., rebuilt at approx. 9,500 hrs.

MFWD TRACTORS

2017 John Deere 6155R, MFWD, Direct Drive ECO 24/24, standard cab, CommandARM, GS3 7" display, 4100processor, Greenstar ready, 30 gpm hyd. pump, 3 hyd., Cat III 3 pt., 540/1000 PTO, full coverage rear fenders, front fenders, cold weather package, panoramic roof, rear wheel weights, 480/80R42 rear singles, 420/85R28 fronts, 660R 3-function loader w/5-tine grapple, 148 hrs., Basic warranty until Mar. 18, 2019 or 2,000 hrs., S/N1RW6155REHT027463

2012 John Deere 6170R, MFWD, AutoQuad 20/20, deluxe cab, 4 hyd., Cat III 3 pt., quick hitch, 540/1000 PTO, integrated auto steer, diff lock, dual beam radar, cold weather pkg., front fenders, front suitcase weights, 380/85R34 front tires, 380/90R50 rear duals, 975 hrs., S/N1RW6170RPCA002090

2007 New Holland TM140, MFWD, powershift, 2 hyd., 3 pt., 540/1000 PTO, 62LB loader, bucket, & grapple, 9,350 hrs.

2005 Agco GT65A, MFWD, 71 hp., CAH, 16F/8R Synchro-Shuttle, 3 hyd., 3 pt., 540 PTO, FL200 quick attach loader, loader joystick, 74" bucket, 48" pallet forks, 1,407 hrs.

2004 New Holland TG255, MFWD, powershift, Super Steer, guidance ready, 4 hyd., return flow, 3 pt., quick hitch, 540/1000 PTO, front fenders, front suitcase weights, 520/85R46 rear duals, 380/85R34 fronts, 5,440 hours, S/NJAW130301

2003 New Holland TG230, MFWD, powershift, Super Steer, MegaFlow, 4 hyd., return flow, 3 pt., quick hitch, 1000 PTO, diff lock, (14) front weights, rear wheel weights, New 380/85R30 front tires, 380/90R46 rear duals, 3,341 hrs., S/N JAW127091

1989 John Deere 4955, MFWD, CAH, powershift, 3 hyd., 3 pt., quick hitch, 1000 PTO, 200 Series ATU, RTK capable, diff lock, front weight bracket, front fenders, 320/85R34 front tires, 320/90R50 hub duals, 11,628 hrs., second owner, S/NRW4955P002254

1984 Ford 1910, MFWD, 12F/4R, 3 pt., 540 PTO, S/NUP03089

2WD & COLLECTIBLE TRACTORS

1986 Case 2394, powershift, 3 hyd., 3 pt., 1000 PTO, front weights, 14.9R46 band duals, shows 7,848 hrs.

1983 IHC 5088, CAH, 3 hyd., 3 pt., 540/1000 PTO, 480/80R42 rear singles, 8,251 hrs.

1978 Case 1175, CAH, 8 spd., 2 hyd., 3 pt., 540/1000 PTO, front weights, 18.4-38 rear tires, 6,731 hrs., A/C not working, S/N8833037

1976 John Deere 4430, quad range, 2 rear hyd., 540/1000 PTO, John Deere 260 self-leveling loader, joystick hyd., dirtbucket, 11:00-16 front tires, 14.9-46 rear tires, 9,870 hrs.

1973 Case 970 Agri King, 12 spd., powershift, 2 hyd., 3 pt., 540/1000 PTO, New Allied 595 hyd. loader, 18.4-34 rear tires

1969 John Deere 4020, Year-A-Round cab, diesel, powershift, side console, 3 hyd., 3 pt., 540/1000 PTO, Woods 340 hyd. loader, 7' bucket, 18.4-34 rear tires, 5,097 hrs.

1961 John Deere 4010, diesel, 4020 motor, 1 hyd., 540 PTO, 18.4-34 rear tires, injector pump gone through

1964 John Deere 3010, wide front, syncro, 1 rear hyd., 3 pt., 540 PTO, F11 loader w/bucket & forks, no welds, 15.9-38 rear tires, 3,500 hrs.

1940 Ford 9N, wide front, gas, 3 pt., no top link, 540 PTO, 6:00-16 front tires, 11.2-28 rear tires

IHC A with Woods 60" belly mower

John Deere 70, wide front, gas, 2 hyd., 540 PTO

Oliver 1800, wide front, 2 hyd., 3 pt., 18.4-34 rear tires, S/N117277-886

1956 Ford 400, wide front, gas, 3 pt., PTO, Woods belly mower

LOADER & TRACTOR ATTACHMENTS

John Deere 158 loader, 96" bucket, mounts and stand

Reitan Mfg. root/rock bucket, 8', for John Deere 840 Series loader

HLA HD3748JD640 pallet forks, fits John Deere 640 loader, New

CJJ-1904 pallet fork, 48" forks

CJJ-G-60 root bucket w/double hyd. grapple

Farmhand bucket, 7', quick tach

Jenkins hyd. grapple, 6', Woods/Dual mounts

Quick tach pallet forks, 48", for John Deere loader

Rock bucket, fits John Deere 4710

GPS EQUIPMENT

John Deere StarFire ITC, SF1, 9,109 hrs., S/NPCGT01C567413

John Deere brown box, SF2 ready, 3,560 hrs., S/N19664

John Deere brown box, SF2 ready, 3,405 hrs., S/N16361

John Deere receiver, SF1, new style base mount, 7,922 hrs., S/NPCGT01C323393

John Deere receiver, SF1, older base mount, 6,418 hrs., S/NPCGT01C320668

John Deere receiver SF1, older base mount, 8,682 hrs., S/NPCGT01C504781

COMBINES

2009 John Deere 9870, 2WD, STS, Contour-Master, premium cab, deluxe controls, ProDrive, 5 spd. feeder house, integrated auto steer, TouchSet, Y&M less display, diff lock, round bar concaves, 22-1/2' folding unloading auger, PowerCast tailboard, Maurer hopper ext., 520/85R42 duals, 28L-26 rear tires, 1,762 sep. hrs., 2,452 engine hrs., S/N1H09870S731349

2009 John Deere 9870, STS, PRWD, deluxe controls, 5 spd. feeder house, integrated auto steer, TouchSet, hopper ext., 22-1/2’ high cap. unloading auger, PowerCast tailboard, HID lights, electric mirrors, (2) sets concaves, 800/70R38 front tires at 80%, New 28L-26 rear tires, rear hitch, 2,185 sep. hrs., 3,266 engine hrs., New moisture sensor, Greenlight at RDO every year

2010 John Deere 9770, Contour-Master, deluxe controls, 5 spd. feeder house, integrated auto steer, custom cutter ext. wear pkg., 22' high cap. unloading auger, fine cut chopper, HID lights, heavy duty adj. rear axle, 520/85R42 straddle duals, 600/65R28 rear tires, 2,414 sep. hrs., 3,300 engine hrs., engine OH w/warranty, S/N736319

2010 John Deere 9770, PRWD, Contour-Master, deluxe controls, heavy duty variable spd. feeder house, integrated auto steer, custom cutter ext. wear pkg., 22' high cap. unloading auger, fine cut chopper, HID lights, 520/85R42 straddle duals, 480/70R30 rear tires, 2,085 sep. hrs., 2,954 engine hrs., S/N735872

2009 John Deere 9770, STS, Contour-Master, deluxe controls, integrated auto steer, TouchSet, Y&M, variable spd. feeder house, 22-1/2' high cap. unloading auger, deep tooth chaffer, HID lights, fine cut chopper, extended wear pkg, Maurer hopper ext., 20.8R42 duals, 600/65R28 rear tires, 1,500 sep. hrs., 2085 engine hrs., S/NH09770S733498

2006 John Deere 9760, STS, deluxe cab, Contour-Master, deluxe controls, TouchSet, high torque variable spd. feeder house, Y&M, high cap. unloading auger, fine cut chopper, HID lights, 520/85R42 dual tires, 28L-26 rear tires, 2,720 sep. hrs., 4,011 engine hrs., Y&M sensor new in 2017, S/NH09760S710635

2007 Case-IH 8010 axial flow, PRWA, deluxe cab, deluxe controls, Field Tracker, Pro 600, variable spd. feeder house, auto steer ready, Y&M, rock trap, 21' auger, straw chopper, 1,751 sep. hrs., 2,453 engine hrs., S/NHAJ200745

Case-IH 2388, deluxe controls, variable spd. feeder house, Y&M, Crary hopper ext., bubble up auger, Extender unloading auger ext., rock trap, large wire concave, round bar concave, 30.5-32 singles, 3,338 sep. hrs., 4,103 engine hrs., S/N0000271807

1996 Case-IH 2188, PRWD, Field Tracker, specialty rotor, reverser, rock trap, Crary hopper ext., chopper & spreader, 30.5-32 front tires, 3,492 sep. hrs., 4,230 engine  hrs., less than 150 hrs. on Titan Machinery Uptime inspection, S/NJJC0192982

1998 John Deere 9610, RWA, variable spd. feeder house, fore/aft, twin spinner chaff spreader, rock trap, 18.4-42 duals, 2,030 sep. hrs., 2,948 engine hrs., single owner

1994 John Deere 9600, fore/aft, oil cooler, high speed chopper, 2,990 sep. hrs., 3,933 engine hrs.

1994 John Deere 9600, DHH, fore/aft, RS, John Deere ATU harness, Maurer hopper ext., long auger, TSR fine cut chopper, 480/80R38 straddle duals, 3,552 sep. hrs., 4,786 engine hrs., S/N656706

1991 John Deere 9500, 2WD, 3 spd. throttle, DAM, AHHC, Crary Big Top hopper ext., 20' ext. unloading auger, 10 Series updates including feeder house fan, sieve adj. & sieve lights, Michelin 680/75R32 tires, 85%, original 14.9-24 rear tires, 2,496 sep. hrs., 3,375 engine hrs., 130 hrs. since full inspection by RDO, Kindred, ND, full service records available, single owner, S/NH09500X642857

1988 Case-IH 1680, axial flow, AHH, RS, fore/aft, rock trap, chopper, air foil sieve, cross flow clean fan, 30.5-32 tires, 14.9-24 rear tires, 5,140 engine hrs., S/N38086

1983 John Deere 8820, variable spd. feeder house, hopper ext., chaff spreader, 30.5-32 singles, 14.9-24 rear tires, shows 6,669 hrs.

1982 John Deere 7720, hydro, AHH, variable spd. feeder house, rock trap, chopper, corn sieve, 24.5-32 front tires, 14.9-24 rear tires, 5,103 hrs., S/N510341

1979 John Deere 8820, turbo, PRWD, variable spd. feeder house, hopper ext., chopper, 30.5-32 tires, 16.9-26 rears, shows 1,199 hrs., S/N364619H

IHC 1482, pull-type, Sund pickup, New belts & bearings, set up for edible beans

PICKUP HEADS

2015 Case-IH 3016 Series II pickup head, 15', wind bar, single pt. hookup, hyd. pressure adj., light pkg., S/NYES058200

2015 Case-IH 3016 Series II pickup head, 15', wind bar, single pt. hookup, hyd. pressure adj., light pkg., S/NYFS058306

Case-IH 1015 pickup head, 15', Melroe 388 7-belt pickup

Case-IH 1015 pickup head, 7-belt pickup, S/N553437

Case-IH 1015 pickup head, 7-belt pickup

Case-IH 1015 pickup head, 6-belt pickup

Case-IH 1015 pickup head, IHC 7-belt pickup

Case-IH 1010 pickup head, Melroe 6-belt pickup, single pt. hookup

IHC 810 pickup head, 6-belt IHC pickup

IHC 810 pickup head, 5-belt pickup, S/N14800750026144

IHC 810 pickup head

IHC 810 pickup head, 6-belt pickup, for parts

IHC 810 pickup head, Sund 22’ pickup

John Deere 914 pickup head, AHH, 7-belt pickup

John Deere 914 pickup head, 7-belt pickup, single pt., big tires

John Deere 914 pickup head, 7-belt pickup

John Deere 912 pickup head, Melroe 388 7-belt pickup, 10 Series hookup

John Deere 912 pickup head, 6-belt pickup, New belts

John Deere 220 pickup head 371364H

John Deere 214 pickup head, 6-belt pickup, S/N485589

1983 John Deere 212 pickup head, 6-belt pickup, 00/10 Series hookup, S/NH200X585096

John Deere 212 pickup head, 6-belt pickup, New belts

(2) John Deere 212 pickup heads, 5-belt pickups, S/N318052, S/N221181

John Deere 212 pickup head, 6-belt pickup, wind guard

(2) John Deere 212 pickup heads, 5-belt pickups

John Deere 212 pickup head, 6-belt pickup

John Deere 100 Series pickup head, 5-belt pickup


FLEX HEADS

2011 John Deere 635F flex head, 35', AHH, finger reel, hyd. fore/aft, high dam, poly, stubble lights, single pt. hookup, S/N1H00635FPB0742930

2011 John Deere 635F flex head, 35', AHH, finger reel, hyd. fore/aft, high dam, poly, stubble lights, single pt. hookup, S/N1H00635FLB0742449

2011 John Deere 635F flex head, fore/aft, finger reel, Crary wind system, S/N741980

2011 John Deere 635F flex head, 35’, AHH, hyd. fore/aft, finger reel, low dam, poly, stubble lights, Crary wind system w/extra gear case, (2) sets crop dividers, (2) extra sickles, single pt. hookups, S/N1H00635FVB0742531

2010 John Deere 635 flex head, finger reel, fore/aft, low dam

2009 John Deere 635F flex head, 35’, fore/aft, finger reel, S/N731851

2006 John Deere 635F flex head, 35', AHH, finger reel, hyd. fore/aft, high dam, poly, stubble lights, single pt. hookup, S/NH00635F716698

2005 John Deere 635F flex head, 35', high dam, Crary air bar, flex shafts, SCH sickle, single pt. hookup, S/N711441

John Deere 635F flex head, 35', full finger, fore/aft, poly bottom, high dam, S/NH00635F711909

John Deere 635F flex head, 35', full finger, fore/aft, poly bottom, low dam, S/NH00635F716032

2008 John Deere 635 flex head, low dam, poly, stubble lights, fore/aft, single pt. hookup, Crary wind bar, S/N726680

2004 John Deere 635 flex head, set up with Midmach Seedeater 9" pans, orbit reel, S/N706462

2004 John Deere 635 flex head, fore/aft, finger reel, stubble lights, Crary air reel, single pt. hookup

John Deere 635 HydraFlex, 35', hyd. fore/aft, full finger auger, single drive, poly, stubble lights, single pt. hookup, S/NH00635S706519

2005 John Deere 630F flex head, 30', high dam, finger reel, poly, fine & coarse cut sickles, single pt. hookup, shaft drive, S/NH00630F711109

2005 John Deere 630F flex head, 30’, hyd. fore/aft, AHH, finger reel, high dam, single pt. hookups, S/NH00630F711890

2004 John Deere 630F flex head, 30', finger reel, poly, hyd. fore/aft, stubble lights, single pt. hookup, Contour shafts

2012 John Deere 630F flex head, 30’, fore/aft, finger reel, S/N745293

2007 John Deere 630F flex head, 30’, fore/aft, finger reel, S/N721209

2004 Case-IH 1020 flex head, 30', fore/aft, finger reel, 3" cut, hyd. fore/aft, double drive, 88 Series hookup, S/NJJC0350134

Case-IH 1020 flex head, 30', fore/aft, finger reel, full finger auger, full poly, Crary air bar, single pt. hookup, S/NJJC0334076

(2) Case-IH 1020 flex heads, 22-1/2', finger reels

2001 John Deere 930F flex head, 30', hyd. fore/aft, full finger auger, finger reel, poly, Headsight compatible w/Case-IH or John Deere AHH, Contour shafts, New auger fingers, 1,000 acres on New sickle & wobble box, S/NH00930F693286

2000 John Deere 930F flex head, 30', finger reel, hyd. fore/aft, AHH, poly, shaft drive, S/NH00930F696715

2000 John Deere 930F flex head, 30', Crary air reel, hyd. fore/aft, AHH, poly, shaft drive, S/NH00930F697102

2000 John Deere 930F flex head, 30', finger reel, full finger auger, hyd. fore/aft, poly, AHH, wired for Contour-Master, shaft drive, S/NH00930F687154

2001 John Deere 925F flex head, 25', full finger auger, hyd. fore/aft, Crary air reel, poly, Crary cutting system, stubble lights, 00/10 Series hookup, S/NH00925F691273

2001 John Deere 930 flex head, fore/aft, finger reel

1995 John Deere 925F flex head, 25’, AHH, finger reel, Crary air reel, 00/10 Series hookups, 2 yrs. on new poly

John Deere 930 flex head w/trailer, New drum

John Deere 930F flex head, steel crop dividers

IHC 820 flex head, 22-1/2', finger reel, 88 Series hookup

John Deere flex head, 20’, finger reel, poly skids, 10 Series hookups, S/N274133H

FLEX DRAPER & DRAPER HEADS

2015 Case-IH 3162 flex draper, 40', Agri-Flex, Case-IH mounts

2015 John Deere 640FD flex draper, 40', AHH, finger reel, fore/aft, stubble lights, single pt. hookup, S/N1H0640FDHF0775356

2013 John Deere 640FD flex draper, 40', AHH, finger reel, fore/aft, stubble lights, single pt. hookup, S/N1H0640FDPC0755142

2012 John Deere 640FD flex draper, 40', AHH, finger reel, fore/aft, stubble lights, single pt. hookup, S/N1H0640FDLC0746482

2014 MacDon FD-75S flex draper, 35', flex float technology, finger reel, hyd. fore/aft, gauge wheels, John Deere S Series hookup, New sickle sections, serviced & field ready, includes spare sickle

2009 MacDon FD70 flex draper, 40', upper cross auger kit, slow speed transport, Case-IH adapter, single pt. hookup, approx. $6,000 in new parts & labor, S/N192691

2008 MacDon FD70 flex draper, 40', upper cross auger kit, slow speed transport, Case-IH adapter, single pt. hookup, S/N177726

2010 AGCO 9250 DynaFlex draper head, 40', New sickles

2010 Case-IH 2162 flex draper head, 40', finger reel, single sickle drive" YAZN12533

2007 Case-IH 2062 flex draper, 36', finger reel, fore/aft, gauge wheels, single pt. hookup, S/NCCC0015833

2015 John Deere 635D draper, 35', finger reel, hyd. fore/aft, AHH, transport, stubble lights, single pt. hookup, S/N1H00635DJER765416

2010 Case-IH 2152 draper head, 45', hyd. fore/aft, double drive, single pt. hookup, slow speed transport, S/NYAZN07435

2010 John Deere 640D draper, 40', finger reel, hyd. fore/aft, transport, stubble lights, single pt. hookup, S/N1H00640DVA0736058

2009 MacDon 2052 draper head, 40', double sickle drive, slow speed transport, S/N193432

1998 MacDon 960 draper head, 36’, bat reel, 00/10 Series hookups, self-contained transport

CHOPPING CORN HEADS

2014 John Deere 612C chopping corn head, 12x30", RowSense, AHH, hyd. deck plates, knife rolls, outer gathering ext., stubble lights, single pt. hookup, S/N1H00612CHEC765653

2012 John Deere 612C chopping corn head, 12x20", RowSense, AHH, hyd. deck plates, knife rolls, outer gathering ext., stubble lights, single pt. hookup, S/N1H00612CLCC745995

2011 John Deere 612C chopping corn head, 12x22", Insight header height, S/N1H0612CCTB0740332

2010 John Deere 612C chopping corn head, 12x30", AHH, hyd. deck plates, knife rolls, outer gathering ext., stubble lights, single pt. hookup, S/N1H0612CCTA0735758

2014 Capello chopping corn head, 12x22", Insight row sense/height control, hyd. deck plates, John Deere single pt. hookup, cob saver

2012 Capello chopping corn head, 12x22", hyd. deck plates, Headsight, stalk stompers, mounts for Case-IH

2008 Drago chopping corn head, 8x30", auto deck plates, knife rolls, Headsight height control, John Deere single pt. hookup, S/N24948

2008 New Holland 99C chopping corn head, 8x30", hyd. deck plates, Crop Sweeper hyd. reel, single pt. hookup, S/N8625542004

2008 Geringhoff RD1200B chopping corn head, 12x22", hyd. deck plates, Field Tracker, hookup for Case-IH 8120, S/N9300812221B

Geringhoff RD800B chopping corn head, 8x30", hyd. deck plates, Headsight, single pt. hookup, John Deere mounts, one season on New knives, front (4) knives are carbide, S/N92466830B

2003 Geringhoff RD chopping corn head, 8x22", hyd. deck plates, John Deere hookup, S/NRD822/B

2005 Harvestec 4212C chopping corn head, 12x22", Headsight, (4) stalk stompers, hyd. deck plates, knife rolls, outer gathering ext., Case-IH hookup, S/N005172

IHC 863 corn head, 8x22", knife rolls, left end row unit needs repair, (2) drive shafts, roll of plastic fitted for pan

NON-CHOPPING CORN HEADS

2010 North Star 1800/B non-chopping corn head, 18x22", hyd. deck plates, Insight header height, S/N7189101822/B

2007 John Deere 1293 corn head, 12x30", header height, RowSense, hyd. deck plates, Contour-Master, stubble lights, S/N720673

2007 John Deere 1291 corn head, 12x22", quick connect

2007 John Deere 893 non-chopping corn head, 8x30", knife rolls, hyd. deck plates, cob saver, Contour shaft, outer gather ext., single pt. hookup, S/N701312

John Deere 893 corn head, 8x30", poly snouts, carbide fluted rolls, cob saver, New PTO shafts, fully serviced, field ready

1988 John Deere 843 non-chopping corn head, 8x30", regular rolls, steel snouts, cob saver, shaft drives, S/NH00843X626062

1980 John Deere 843 non-chopping corn head, 8x30", low tin, oil bath, Calmer knife rolls, Contour shafts, S/N417451

John Deere 843 corn head, 8x30", oil bath, knife rolls, (2) drive shafts

John Deere 843 corn head, 8x30", oil bath, cob saver, New poly snouts, chain case covers, & PTO shafts, fully serviced, field ready

John Deere 843 corn head, 8x30", knife rolls

John Deere 643 corn head, 6x30", knife rolls, updated row unit gear boxes, slow down kit for auger, cob saver, approx. 800 acres on stripper plates and gathering chains

John Deere Clark conversion non-chopping corn head, 8x30", standard rolls, poly snouts, 00/10 Series hookup

John Deere non-chopping corn head, 8x30", regular rolls, steel snouts, shaft drives, S/N186542H

1994 Case-IH 1083 corn head, 8x30", standard rolls, S/N149288

Gleaner Hugger corn head, 12x22", GVL, poly, one year on chains

IHC corn head, 8x22", 1000 Series bearings

IHC 983 corn head, 8x30”, John Deere attachment, water pump style stalk roller bearings

John Deere non-chopping corn head, 8x22”, reg. rolls, steel snouts, 00/10 Series hookups

John Deere 653 corn head, 6x30”, metal snouts

RIGID, ALL CROP & SUNFLOWER HEADS

IHC 810 rigid head, 22', Lucke 12x22" sunflower pans

John Deere 930 rigid head, 15" sunflower pans, bat reel

John Deere 925 rigid head, fore/aft, bat reel, 10 Series hookups, S/NP656151

1981 John Deere 224 rigid head, bat reel, 00/10 Series hookup, S/N495897

John Deere 220 rigid head, bat reel

John Deere 1253 all crop head, 12x22", shaft drive, Case-IH/New Holland hookup

John Deere 853A all crop head, 8x30", used for sunflowers

John Deere 853 all crop head, 8x30”

Sunflower head, 25', sunflower reel, 9" pans, single pt. hookup  

HEADER TRAILERS

(2) FW Mfg header trailer, 46’, 6-wheel, fenders, lights, torsion susp., single axle brakes, 7.5-16 tires, New

Industrias Americas 845 header trailer, 45’, 6-wheel, single axle brakes, lights, New

FW Mfg header trailer, 42’, 6-wheel, fenders, lights, torsion susp., single axle brakes, 7.5-16 tires, New

(12) FW Mfg header trailer, 42’, 6-wheel, front fenders only, 7.5-16 tires, New

Industrias Americas 842 header trailer, 42’, 6-wheel, single axle brakes, lights, New

(2) Industrias Americas 840 header trailers, 40’, 6-wheel, single axle brakes, lights, New

(2) Industrias Americas 440 header trailers, 40’, 6-wheel, New

(2) Wemco header trailers, 40’

Duo Lift Header Hauler tandem axle header trailer, 37', ext. hitch, S/NDL137

(7) FW Mfg header trailer, 37’, 6-wheel, front fenders only, 7.5-16 tires, new

(2) Industrias Americas 836R tandem axle header trailers, 36’, 6-wheel, torsion susp., lights, single axle brakes, New

Wemco header trailer, 36'

Unverferth HT header trailer, 36’, S/NA38940270

Wemco header trailer, 35'

Hart header trailer, 35’

Industrias Americas 835 tandem axle header trailer, 35', lights, trailer brakes

Industrias Americas 835 header trailer, 35’, 6-wheel, New

(2) Industrias Americas 435 header trailer, 35’, 6-wheel, New

FW Mfg header trailer, 32’, 6-wheel, front fenders, 7.5-16 tires, New

Industrias Americas 430 header trailer, 30’, 4-wheel, New

Single axle single pole header trailer, 30'

Single pole header trailer, 30'

Mattson header trailer, 30', 2-wheel

CHC-250 header trailer, 25', 4-wheel, telescoping hitch, S/ND51190287

Header trailer, 25', 4-wheel

Shop-built header trailer, 4-wheel

(2) Header trailers, 2-wheel

Single axle header trailer, 30’, 4-wheel, dolly front

Single axle single pole header trailer, 25’

SWATHERS

2013 Case-IH WD1903 self-propelled swather, 25’, CAH, buddy seat, spring susp. cab, air susp. rear axle, hydrostatic,hyd. header tilt & float, towable header w/hitch & wheels, 600/65R28 tires, shows 410 hrs., S/N63700 

Case-IH 8220 pull-type swather, 25', bat reel, New canvas, 400 acres

Case-IH 8210 pull-type swather, 21', bat reel

Case-IH 725 pull-type swather, 25', 540 PTO

(2) IHC 75 pull-type swathers, 25', stored inside

John Deere 596 swather, 25', auto fold, transport

John Deere pull-type swather, 25', auto fold, bat reel, S/NE00590A877785

(2) Premier pull-type swathers, 25'

MacDon 3000 pull-type swather, 21', auto fold, bat reel, 1000 PTO

MacDon hyd. fold swather, 21', bat reel

MacDon pull-type swather, 21', rubber canvas, 540 PTO

IHC 75 swather, 21-1/2', 540 PTO

John Deere 2320 self-propelled swather, 21', Chrysler inline 6 cyl., hydrostatic, center or end delivery, bat reel, 13.6-24 tires, 2-wheel transport, S/N615873E

John Deere 800 swather, 18', Chrysler slant 6, swather transport, New canvas 3 yrs. ago, good runner

(2) John Deere 590 pull-type swathers

Versatile 400 swather, 18', hydrostatic, stored inside, S/N4003009383

GRAIN CARTS

2016 Brent 1282 grain cart, 1,200 bu., walking tandem, roll tarp, hyd. spout adj., 20" corner auger, 410 scale, 520/85R38 duals, S/NB35260100

2013 Parker 1348 grain cart, 1,300 bu., roll tarp, hyd. spout adj., 22" front auger, 1250/50R32 flotation tires, S/NB31310131

2010 Parker 1048 grain cart, 1,000 bu., corner auger, hyd. spout, roll tarp, electronic scale, 900-32 single tires, 1000 PTO

Killbros 1820 grain cart, 1,000 bu., 16" auger, roll tarp, scale, 1000 PTO, Trelleborg 900/60-32 tires, S/ND44540109

1991 Brent 772 grain cart, 750 bu., diamond tread tires, corner auger, roll tarp, S/N772162

EZ-Trail grain cart, 700 bu., 15" unloading auger, hyd. fold auger, hyd. slide gate, 1000 PTO, New lower auger 2 yrs. ago

AIR DRILLS & DRILLS

Case-IH SDX40 no-till drill, single disc, double shoot, Pro 600 monitor, full run monitor, 3380 commodity cart, 3-compartment 118/93/169 bu. tanks, 10" hyd. fill auger, hyd. dual fan drive, hyd. drive w/variable rate, 18.4-38 duals, cart S/NY95015354, drill S/NY95003494

1992 Concord 4012 air seeder, 40', 12" spacing, 3-section fold, pneumatic packer wheels, Concord 2000 twin compartment commodity cart, hyd. fan, hyd. fill auger, offset axles, rice tires, cart S/NAS0756, drill S/NATD-1012

John Deere 9300 press drills, 40', factory transport

IHC 620 drills, (2) 14's, 6" spacing, w/transport

VERTICAL TILLAGE

2011 Salford Extreme 570, 41', front two rows convex blades, rear two rows 8-wave, weight pkg., walking tandems across, 3-bar heavy duty harrow, rolling chopper, heavy duty 305/70R22.5 tires on main frame, S/N112315

Sunflower 6630 Saber Blade vertical tillage, 32', rolling baskets, S/NAGCS6630ZPRT046

CHISEL PLOWS

2013 Summers Superchisel, 44', 4" beavertail shovels, Model 106 3-bar harrow, single owner

2012 Case-IH Flextill 600 chisel plow, 45', 12" spacing, single pt. depth, walking tandems across, 5-section fold, floating hitch, 3-bar harrow, heavy duty 245/70R17.5 tires on main frame, New pins & bushings on all shanks, New 2" spikes, S/NYCS003470

2011 Summers chisel plow, 36', floating hitch, walking tandems, heavy duty 3-bar harrow

2002 John Deere chisel plow, 43', 12" space, walking tandems, 3-bar harrow

John Deere 610 chisel plow, 41', 3-section fold, 12" space, single pt. depth, walking tandems across, Summers heavy duty 3-bar harrow

Wil-Rich 4400 chisel plow, 40', double fold, walking tandems, harrow

IHC 5600 chisel plow, 38', 3-bar harrow

Flexi-Coil 300B chisel plow, 31', Flexi-Coil 3-bar harrow

John Deere 690 chisel plow, 30', spring reset shanks, walking tandems, single pt. depth, 3-bar harrow

John Deere 1600 chisel plow, 18', walking tandems, single bar harrow

Leon drawbar pull chisel plow, 25', heavy John Deere harrow

Wil-Rich chisel plow, 22', walking tandems on main

Wil-Rich pull-type chisel plow, 10', harrow, sweeps

Melroe Geisler chisel plow, 30’, NH3 cold flow, singles on wings

Melroe chisel plow, 31’, tandems on wings, New points

John Deere chisel plow, 18’, 3 pt.

DISC CHISELS & RIPPERS

2012 Summers disc chisel, 40', front caster wheel kit

2012 Summers disc chisel, 28', 12" spacing, 1,000 lb. shanks, (4) sets walking tandems, single pt. depth, 11L-15 flex tires on main frame, upgraded front dish bearings, S/NL2811

2010 Summers disc chisel, 36', rear hitch, front caster carrier wheels, weight pkg., 4-bar harrow

Sunflower 4232 coulter chisel, 21 shank, 26', walking tandems across, 15" space, rock flex disc, 4" twist shovels, 18-1/2" discs, Gates heavy duty 3-bar harrow, S/N04232L20000036

2014 John Deere 2720 disc ripper, 22-1/2', 9 shank, 30" space, cushion trip, single pt. depth, scrapers, walking tandems across, New points, S/N1A82720XJE0755452

2003 John Deere 2700 disc ripper, 17-1/2', 7 shank, 30" space, single pt. depth, walking tandems, S/NN02700X001302

Case-IH 730B ripper, 7 shank, 30" space, 22" discs, straight and wing points

Unverferth 120 Zone Builder ripper, 3 pt. or pull-type, 6 shank, 30" space, spring trip, shear bolt protected, adj. cover discs, gauge wheels, ripple coulters, New shims & points

DISCS

2013 Summers 2510DT, rock cushion diamond disc, 38', notched blades, 10" spacing, scrapers, weight pkg., 3-bar harrow, 245/75R22.5 main carrier tires, 12.5L front & wing tires, front center single disc, center rear shank w/sweep or vertical tillage coulters, S/NM0050

2011 Landoll disc, 36', 9" spacing, 23-5/8" front blades, 23-3/4" rear blades, hyd. leveling

2002 Summers 1000 Series diamond disc, 38', center leveling harrow section

Bush Hog 1450 tandem disc, 33', 24" discs, mud scrapers

Sunflower 1434-36 tandem disc, 36', rock flex, front castering gauge wheels, 9" spacing, S/N01434H20020265

Wishek 842NT heavy duty disc, 34', floating hitch

1995 John Deere 650 disc, 32', 20" blades

Krause 4950 tandem disc, 30’, rock flex, 9” spacing, scrapers, 21-1/2” front & 22” rear discs, tandems on main, singles on wing, S/N2064, some new bearings, serviced

Big G 3128 offset disc, 28'

Tandem disc, approx. 14'

Danish tine cultivator, 6', 3 rank

King Kutter disc, 5-1/2', 3 pt.

Case-IH 3900 tandem disc, 32’, tandems across, scrapers

FIELD CULTIVATORS

2012 Case-IH Tigermate 200 field cultivator, 50', 6" spacing, 5-section, rear hitch, (6) sets walking tandems, 8-bolt 12.5L-16.5SL tires on main frame, (4) pivoting gauge wheels, 4-bar coil tine harrow, (2) sets hyd. circuits, S/N8YBD057054

Wil-Rich Quad 5 field cultivator, 50', double spring, 5-section floating hitch, 5-bar harrow, 12.5 tires, New 9" knock-on sweeps

John Deere C11 field cultivator, 8', 3 pt.

OTHER TILLAGE EQUIPMENT

IHC 800 plow, 9x18", extra bottom

John Deere 3600 auto reset plow, 8x18"

White 546 plow, 6x16", spring trip, 2 pt., no coulters

Melroe 911 plow, 5x18", drawbar hitch

John Deere harrow, 52', 4-bar, off 2200 field cultivator

Harrow, 35', 3-bar, off chisel plow

Case-IH crumbler, 37', retractable hitch

SUGARBEET EQUIPMENT

Alloway harvester, 6 row, belted conveyor chain, 1000 PTO

Alloway Topmaster defoliator, 12x22", belt drive, hyd. scalpers, front gauge wheels, 1000 PTO CV driveshaft

Alloway BT267 folding defoliator, 12x22", belt drive, front L-knives, rear two drums rubber, front adj. gauge wheels, rotary scalpers, light pkg., large 1000 CV PTO, S/N3545

ROW CROP EQUIPMENT

Elmers RCSS cultivator, 12x22", rolling shields, hand crank depth adj.

John Deere cultivator, 12x22", 3 shank w/cutaways, long tunnel shields

Elmers cultivator, 12x22”, heavy duty single shank, rolling shields, hyd. lift assist, set up for NH3 w/hyd. nitrolator

Alloway 2130 cultivator, 8x30", tunnel shields, large gauge wheels, threaded screw depth adj.

John Deere 400 rotary hoe, 24'

STALK CHOPPERS

Alloway stalk chopper, 22', 3 pt., 1000 PTO, (4) gauge wheels

Loftness stalk chopper, 22', drawbar, 1000 PTO, New bearings on drums 800 acres ago, only one side of knives used

Woods Alloway stalk shredder, 20', 3 pt., 1000 PTO

2006 Loftness shredder, 12x22", hyd. lift

SLEEPER SEMI TRACTORS

2013 International ProStar Plus tandem axle, mid-roof 73" sleeper, 450 hp. MaxxForce 10 spd., engine brake, air susp., air slide 5th, twin aluminum fuel tanks, 22.5 tires on aluminum wheels, 336,000 miles

2007 Kenworth T800, 60” mid-height sleeper, C15 Cat, 10 spd. 3-pedal autoshift, air ride, air slide 5^th, dual aluminum fuel tanks, quarter aluminum fenders, 11R22.5 tires on aluminum, 720,000 miles

2006 Volvo, sleeper, leather seats, VED12-465, Meritor MO1642AZF, air ride, cruise, diff lock, 12,500 lb. front axles, 18,739 lb. rear axles, 3:42 ratio, New 11R22.5 tires on aluminum rims, 601,118 miles, New batteries

2003 Volvo, sleeper, VED12-465, RTO16910C-AS2 10 spd., air ride, cruise, cloth front seats, diff lock, 12,500 lb. front axles, 37,500 lb. rear axles, 3:42 gears, New 11R22.5 tires on aluminum wheels, 741,249 miles, batteries in Oct. 2017

2000 Kenworth T2000, sleeper, N14 Cummins, Eaton autoshift, engine brake, air susp., air slide 5th, cruise, diff lock, 11R22.5 tires on aluminum rims, 891,674 miles

2000 Freightliner conventional, C12 Cat, 10 spd., wet kit, safety pull, 285/75R24 tires on aluminum wheels

2003 Volvo, sleeper w/seats, VED12-465, RTO16910C-AS2 10 spd., air ride, cruise, leather seats, diff lock, 12,500 lb. front axles, 37,500 lb. rear axles, 3:42 gears, New 11R22.5 tires on aluminum wheels, 817,334 miles, batteries in Oct. 2017

1997 IHC 9200, Pro sleeper, 12.7L Detroit, 10 spd., air ride, air slide 5th, dual aluminum fuel tanks, 201" WB, 22.5 tall tires, aluminum front & steel rear wheels, shows 926,897 miles

1988 Kenworth T800 conventional, 42" flat top sleeper, 855 Big Cam Cummins, Eaton Fuller 10 spd., engine brake, air ride, air slide 5th, A/C, dual air seats, dual aluminum fuel tanks, single exhaust, diff lock, 200" WB, 4:11 ratio, 11R22.5 front tires, 12R22.5 rear tires, (6) aluminum wheels

1985 White Volvo tandem axle, integral sleeper, 60 Series Detroit, 9 spd.

DAY CAB SEMI TRACTORS

2013 International 8600i, day cab, 410 hp., Eaton 10 spd., air ride cab, 192" WB, 182,000 actual miles

2013 International ProStar, day cab, MaxxForce engine, 10 spd., jake brake, aluminum wheels

2013 International 8600 TranStar single axle, day cab, MaxxForce, 410 hp., Eaton Fuller 10 spd., engine brake, air ride cab, air slide 5th, cruise, power windows & locks, power remote mirrors, dual 100 gal. aluminum fuel tanks, pintle hitch, 12,000 lb. front axle, 23,000 lb. rear axle, 4:10 ratio, 156” WB, 3’x2’x2’ aluminum storage box, 11R22.5 tires, aluminum front and steel rear rims, 558,493 miles, $9,500 in recent repairs

2012 International 8600 TranStar, day cab, MaxxForce II, 370-450 hp., FRO-13210C transmission, engine brake, air ride, dump valve, air slide 5th, hyd. power steering, A/C, dual aluminum fuel tanks, single chrome stack, AM/FM, disc player, tilt, cruise, power windows, 40,000 lbs. rears, 3:58 ratio, 187” WB, 22.5 low pro tires, shows 496,829 miles

2010 Mack single axle, day cab, MP7 engine, Eaton Fuller automatic, 12,000 lb. fronts, 23,000 lb. rears, aluminum wheels

2008 International ProStar Premium, day cab, ISX Cummins, 435 hp., Eaton Fuller 10 spd., 12,000 lb. fronts, 40,000 lb. rears, 174" WB, New rear tires

2006 IHC 8600, day cab, ISM Cummins, 10 spd., jake brake, air ride, air slide 5th, 22.5 tires on steel rims

2006 Kenworth T800 tandem axle, day cab, ISX 475, Eaton 10 spd., engine brake, air ride, air slide 5th, cruise, diff lock, wet kit, twin aluminum fuel tanks, twin aluminum stacks, 3:70 ratio, 22.5 tires on aluminum rims

2004 Freightliner tandem axle, day cab, Mercedes OM-460, Meritor automatic, engine brake, air ride, fixed 5th wheel, cruise, diff lock, 22.5 tires on aluminum rims, 918,000 miles, recent work

2003 International 8500 single axle, day cab, HT530E, 220-290 hp., 7 spd., 3.58 ratio, spring susp., adj. 5th wheel, 156" WB, 22.5 low pro tires

Volvo VNL64T430, VED12, 395 hp., 10 spd., jake brake, exterior visor, PTO, air slide 5th, dual aluminum fuel tanks

2001 Volvo VNMT single axle, day cab, Volvo engine, Eaton automatic, air susp., cruise, diff lock, 295/75R22.5 tires on steel wheels, shows 297,000 miles

2000 Volvo VNL tandem axle, day cab, D12 Volvo, 385 hp., Eaton 9 spd., engine brake, air susp., air slide 5th wheel, cruise, diff lock, dual aluminum fuel tanks, 165” WB, 295/75R22.5 tires, aluminum front and steel rear wheels, 711,437 miles

2000 Volvo VNL tandem axle, day cab, D12 Volvo, 385 hp., Eaton 9 spd., engine brake, air susp., air slide 5th wheel, cruise, diff lock, dual aluminum fuel tanks, 165” WB, 295/75R22.5 tires, aluminum front and steel rear wheels, 849,871 miles

1998 Volvo, day cab, M11 Cummins, 10 spd., air ride, air sliding 5th wheel, aluminum tanks, 11R22.5 tires on steel wheels

1997 Peterbilt 377 tandem axle, day cab, C12 Cat, 10 spd., air ride, wet kit, cruise, diff lock, 22.5 tires on steel wheels, 811,560 miles

1996 Freightliner, day cab, 12.7 Detroit, 10 spd., wet kit, safety pull, 11-22.5 tires, aluminum wheels, recent rods and mains

1994 International, day cab, 3406B Cat, 9 spd., air susp., 801,000 miles

1991 Kenworth T600, day cab, 60 Series Detroit, Super 10 spd., engine brake, air ride, air slide 5th, wet kit, twin aluminum fuel tanks, 11-22.5 tires on steel wheels, 1,004,132 miles

1989 Freightliner FLC112, day cab, 3406B Cat, 10 spd., aluminum wheels, rust free CA truck

1987 Peterbilt 379 tandem axle, factory day cab, Cummins, 400 hp., 13 spd., air susp., diff lock, wet kit, aluminum headache rack, dual exhaust, 11R24.5 tires on aluminum wheels, 420,000 actual miles, CA truck

BOX TRUCKS

2005 Kenworth T800, ISX Cummins, 400 hp., Eaton 10 spd., 2 pedal autoshift, engine brake, 21'x96"x68" Reitan aluminum box, Headlift hoist, Shur-Lok roll tarp, 3 pc. endgate, 275/80R24.5 aggressive cap tires, aluminum front & outside rear wheels, shows 586,521 miles, New hoist control, air bags, brake drums & pads, New air system for back wheels, both rear ends rebuilt, top end of engine work done by Cummins, $20,000 in recent repairs

1995 Ford L9000 tri-axle, M11 Cummins, Eaton 9 spd., air up/down steerable pusher axle, air susp., 20' Buffalo box, hoist, roll tarp, 3 pc. endgate, safety pull hitch, diff lock, 315/80R22.5 steer tires, 255/70R22.5 tires on pusher axle, 11R22.5 drive tires, odometer replaced, shows 105 miles, approx. 308,800 total miles, full service records available since 2003

1994 Volvo WCA64T tri-axle, spring ride, M11 Cummins, 10 spd., cruise, air up/down tag axle, diff lock, 2003 Loadline 22'x66" box, hoist, roll tarp, combo gate, rear controls, mud scrapers, 315/80R22.5 front tires on aluminum rims, 295/75R22.5 rear tires on steel rims, 275/70R22.5 tag axle dual tires on steel rims, 648,500 miles

1992 Kenworth T800 twin screw tandem, day cab, air tag axle, L10 Cummins, 9 spd., J-Craft 22' aluminum box, roll tarp, spring susp., plastic liner, beet gate, safety hitch, 22.5 tires on aluminum wheels, 578,077 miles

1989 Ford L9000 tri-axle, steerable lift axle, 375 Cummins, Eaton 9 spd., spring susp., 21' box, roll tarp, combination endgate, 22.5 tires on steel rims

1988 Freightliner tri-axle, air up/down pusher axle, 3306 Cat, 9 spd., 21’ steel box, roll tarp, diff lock, beet equipped, 22.5 tires on steel rims, 843,000 miles

1987 Peterbilt 377 twin screw tandem, air up/down steerable pusher, 3306 Cat, 7 spd., spring susp., Loadline 21'x96"x66" box, roll tarp, plastic liner, combo endgate, single 100 gal. aluminum fuel tank, mud scrapers, Safe-T-Pull hitch, diff lock, shows 83,829 miles, speedometer replaced when purchased, current owner since 2008, fresh clutch at Hamre Repair

1986 Volvo tri-axle, 3406 Cat, 15 spd., air up/down 3rd axle, Midland 20' box, hoist, roll tarp, pintle hitch, 11-24.5 tires on steel, 12-24.5 tires on steering axle, 651,000 miles

1985 Ford Louisville 9000 tri-axle, air up/down tag axle, 6V92 Detroit, Allison automatic, spring susp., 22'x102"x60" aluminum box, roll tarp, 3-door endgate w/grain door, diff lock, 385/65R22.5 front tires, 11R22.5 rear tires, 297,269 miles

1984 IHC 2375 tri-axle, 6V92 Detroit, 7 spd., air up 3rd axle, 20’ box, hoist, roll tarp, combo endgate, New 295/75R22.5 tires

1984 IHC 2375 twin screw tandem, day cab, air pusher axle, L10 Cummins, 9 spd., J-Craft 22' aluminum box, roll tarp, spring susp., plastic liner, beet gate, plumbed for drill fill, safety hitch, 22.5 tires, aluminum wheels, blue, shows 98,454 miles

1984 IHC 2375 twin screw tandem, day cab, air pusher axle, L10 Cummins, 9 spd., J-Craft 22' aluminum box, roll tarp, spring susp., plastic liner, beet gate, plumbed for drill fill, safety hitch, 22.5 tires, aluminum wheels, white

1983 Freightliner tri-axle, air up/down pusher w/duals, 855 Cummins, 13 spd., air susp., Midland 22'x66" box, hoist, roll tarp, combo gate, diff lock, 10:00-15 tires on pusher, 11R22.5 tires on steel wheels, shows 896,144 miles

1978 IHC Eagle Transtar 4300 tri-axle, air pusher axle, 855 Cummins diesel, 13 spd., 19-1/2' box, hoist, 16,000 lb. front axle, 15R22.5 fat front tires, 11R22.5 rear tires

1974 Mack tri-axle, 350 Detroit, Allison automatic, spring susp., 19' box, roll tarp, grain and beet endgates, 22.5 tires on steel rims

1979 Chevrolet C70 twin screw tandem, 427, 5&4 spd., 19'x8' steel box, roll tarp, grain door, dual fuel tanks

1978 Chevrolet C65 Scottsdale lift tag, 366, 5&2 spd., Frontier 19-1/2’ box, hoist, tarp, combo gate, 9:00-20 tires, 32,584 original miles

1975 GMC C6000 tag axle, 366, 5&2 spd., 18-1/2' Frontier twin post hoist, roll tarp

1974 Ford 750 tag axle, 391 V8, 5&2 spd., lift tag, 19' box, hoist, roll tarp, 9:00-20 tires, 85,402 miles, New motor at 58,000 miles

1973 Mack R600 tandem axle, 237 diesel, 5 spd., camelback susp., Frontier 20'x8'x60" box, roll tarp, combo endgate, 10:00-20 tires on Dayton wheels, miles unknown

1970 Ford 500 single axle, V8 gas, 4&2 spd., 16' box, hoist, roll tarp, hyd. for drill fill, 1,500 gal. poly water tank

1961 IHC single axle, V8 gas, 4&2 spd., 15' wood box, hoist, 8:25-20 tires, 106,647 miles

DUMP & DRILL TRUCKS

1979 Ford 8000 tandem axle dump truck, Cummins NTC-230 diesel, 5&4 spd w/overdrive, 14' gravel box, 11R22.5 tires

1974 Chevrolet C60 single axle dump truck, 350, 4&2 spd., 14' box, hoist, roll back tarp, 8.25-20 tires, shows 25,860 miles

OTHER TRUCKS

2000 IHC 4900 tandem axle cab & chassis, DT466, 7 spd., air susp., cruise, diff lock, 230" frame behind cab, 237" WB, 295/75R22.5 tires on steel rims, 177,000 miles

1999 Transcraft Eagle tandem spread axle, 48’x96”, steel/aluminum combo, air susp., one aluminum toolbox, sliding winches, 285/75R24.5 tires, aluminum wheels

1994 Peterbilt 377 tandem axle, 3406 Cat, Eaton Super 10 spd., engine brake, air susp., cruise, diff lock, Willmar 16 ton fertilizer tender, hyd. slides, ext. length auger, 295/75R22.5 tires, 1,095,526 miles

1984 IHC S2100 single axle, DT466 diesel, 5&2 spd., spring susp., air brakes, only 421,315 miles

1978 Mack cab & chassis, Mack engine, 357,540 miles

1977 Ford LT9000 tandem axle cab & chassis, Cummins, Eaton 9 spd., spring susp., 11R22.5 front tires on steel rims, 425/65R22.5 rear tires

1977 Ford LT9000 tandem axle cab & chassis, Cummins, Eaton 9 spd., spring susp., 11R22.5 tires on steel

2000 Freightliner FL70 single axle van truck, Mercedes Benz, 6 spd., cruise, 26'x102" van body, roll-up door, hyd. lift gate, 11R22.5 tires on steel rims, shows 90,869 miles

SERVICE TRUCKS & PICKUPS

2009 Chevrolet 1500 Silverado LT, 4 door, 6' box, 5.3L, automatic, 4WD, power windows & locks, cloth, Rhino-lined box, tow pkg., auto start, 265/70R17 tires on aluminum wheels, 166,136 miles

2002 Ford F350, Super Duty, Lariat, 4 door, Cummins diesel, 6 spd. manual, 4WD, Edge chip, power windows & locks, heated leather, B&W flip over 5th wheel hitch, tow pkg., nerf bars, grill guard, dash mat, front & rear power seats, shows 87,900 miles, New clutch & front-end work

2000 Ford F550, reg. cab, Powerstroke diesel, automatic, 4WD, flatbed

2000 GMC, 1 ton dually, reg. cab, Duramax, automatic, flatbed, 5th wheel ball, 212,000 miles

1999 Chevrolet, 3/4 ton, reg. cab, 5.7L, automatic, 2WD, 8' bed

1998 Chevrolet 3500 dually, 4 door, 6L gas, 4WD, Knapheide service body

1998 Ford F150, ext. cab, 5.4 gas, automatic, 4WD, 6-1/2' box, cloth seats, New Cooper Discoverer 255/70R16 tires on aluminum rims, shows 190,600 miles

Ford F350 XL service truck, 5 spd., 11,000 lb. GVWR, LT215/85R16 tires, 170,000 miles

1990 Ford F350, reg. cab, diesel, Knapheide flatbed, fuel tank w/hose, Honda gas engine

1985 Ford F600 single axle service truck, 370 V8, 5 spd., PTO, Rugby 12’ steel service body, HD vise, TWI Pro-Line gas air compressor, Honda GX630 motor, Miller Trailblazer 55G welder/generator, 2,163 hrs., 9:00-20 tires, 24,235 miles

1989 Chevrolet 1500, V6, automatic, 2x4, cloth seats, newer tires, 118,000 miles, runs good, some rust

1989 Ford, 1/2 ton, V8, automatic, 4WD, used to haul fuel, poor paint

1987 Ford F350, reg. cab, 390 V8, 4 spd., 2WD, 10’ wood flatbed, power steering

HOPPER BOTTOM & PUP TRAILERS

2008 Wilson DWH-551 tandem axle hopper bottom, 41'x96"x78", roll tarp, air susp., load gauge, 2 spd. traps, 11R22.5 tires on aluminum rims

2002 Maurer hopper bottom, 40', ag hoppers, spring susp., roll tarp, 22.5 tires on steel wheels

2002 Merritt tandem axle hopper bottom, 34'x96"x78", spring ride, electric roll tarp, conveyor system for fertilizer, 22.5 tires on steel rims

2001 Timpte Super Hopper tandem axle hopper bottom, 42'x102"x84", air ride, electric roll tarp, 2 spd. traps, SS rear & front corners, 11R24.5 tires on steel rims

2001 Timpte tandem axle hopper bottom, 42'x78", non-ag hopper, air ride, roll tarp, scale, double row lights, 11-22.5 tires on aluminum rims

1999 Wilson tandem axle hopper bottom, 43'x96"x78", standard hoppers, electric tarp, air ride, 2 spd. traps, 22.5 tires on aluminum wheels

1996 Wilson hopper bottom, 43'x102"x78", spring susp., 17" hopper clearance, electric tarp & hoppers, 11-22.5 virgin tires on steel rims, recent brakes, current DOT

1994 Jetco tandem axle steel hopper bottom, 26', ag hopper, roll tarp, spring susp., rear ladder

1996 Jetco steel hopper bottom, 34’, spring ride, roll tarp, 22.5 tires on steel rims

1979 Timpte hopper bottom, 41'x96"x66", non-ag hopper, roll tarp, 11-22.5 tires on steel rims

1974 Hawkeye tandem axle hopper bottom, 42’x66”, tarp, dent on right rear side

1992 Cornhusker pup trailer, 38'6"x96" aluminum body, steel frame, 18' tongue, swing gate, spring susp., 22.5 low pro tires

LIVE BOTTOM & END DUMP TRAILERS

2011 Trail King 5272 tri-axle, 53', air up/down on rear axle, air ride, hyd. endgate w/knife gate, 48" flap belt, single drive, roll tarp, sloped poly, 11R22.5 tires on aluminum rims

2009 Trail King 4172 live bottom aluminum trailer, 41'x72", 48" belts, all hyd., high lift tailgate, roll tarp, air ride, 22.5 tires on aluminum wheels

2002 Red River tri-axle live bottom, 53'x102"x78", hyd. high lift gate w/slice gate, rubber belt, air susp., air up/down steerable tag axle, 11R22.5 tires on steel rims, rebuilt floor, New tires, brakes & liner one year ago

2002 Red River live bottom, 50', 48" belt, spread axle, air ride, hyd. rear door w/grain door, New tarp, rear controls, 11R24.5 tires, aluminum outside & steel inside rims

1984 East end dump, 33’x102”x60”, aluminum frame, poly liner, 275/80R24.5 tires on steel wheels

DRY VAN TRAILERS

1995 Comet dry van, 48', spread axle, slider, air ride, aluminum floor, low pro 24.5 tires on steel rims

1986 Great Dane tandem axle dry van, 48', spring susp., 11R22.5 tires on steel rims, Title delayed, in transfer

1979 Timpte van trailer, 42', spring ride, swing & side doors, 22.5 tires on steel budd wheels

2002 Wabash tandem axle van trailer, 53’x102”, spring ride, swing doors, smooth interior walls, needs repair

(2) 2000 Wabash tandem axle van trailers, 53’x102”, air ride, smooth interior walls, need some repair

1999 Wabash van trailer, 48’x102”, air ride, tandem axle slider, roll-up door, translucent roof, need some repair

(3) 1999 Monon tandem axle van trailers, 53’x102”, air ride, swing doors, smooth interior walls, need some repair

1995 Fruehauf van trailer, 48’x102”, air ride, tandem axle slider, translucent roof, used for storage

OTHER TRAILERS

2015 LoadMax tandem axle deckover trailer, 25'x102", hyd. dovetail, self-contained hyd. system w/solar charger, dual hyd. jacks, hyd. disc brakes, pintle  hitch, 12,000 lb. axles, New 235/80R16 tires

2014 Doolittle Easy Loader tandem axle tilt bed trailer, 20'x80", wood deck, (2) 7,500 lb. axles, heavy duty jack

2014 PJ tandem axle bumper hitch trailer, 20' deck, 2' dovetail, slide-out ramps, rear jacks, 7,000 lb. axles, New tires on 8-bolt rims, spare tire, New leaf spring bushings and bolts

2014 PJ gooseneck flat deck trailer, 32’, 5’ dovetail w/(2) flip over ramps, gooseneck 2-5/16” coupler, (2) 12,000 lb. electric brake Dexter axles, black powder coat, cold weather harness

2013 ABU tandem axle trailer, 22'x7', 2' beavertail, flip-up ramps, spring susp., wood deck, LED lights, 16" spacing for all cross members, 16" 10-ply tires, 7,000 lb. axles, less than 1,000 miles, single owner

2012 Quality tandem axle flat deck trailer, 20'x100', wood deck, (2) 5,000 lb. axles, jack

Deckover trailer, 32'x8', steel, w/hyd. rear ramp, self-contained, electric over hyd., electric brakes, 8-hole rims

2012 PJ car hauler trailer, 20’x6”, 2’ dovetail w/fold-up ramps, 2-5/16” adj. hitch, (2) 7,000 lb. electric brake axles, spare tire mount, black powder coat

2009 XL Specialized XL60MFG mechanical detachable double drop lowboy, 48', 30 ton, 102" wide, 30' main deck, 9'6" top deck, 8'6" rear deck, aluminum floor, outriggers, air ride, 22.5 low pro tires, disc wheels

2007 Fontaine drop deck trailer, 53’, 10’ top deck, 38’ well, 5’ beavertail, 10’ spread axle, air ride, steel frame, wood deck

1988 D&N tandem axle gooseneck trailer, dovetail with (3) flip over ramps, metal deck, 12,000 lb. axles, single jack, 10,000 lb. winch on neck

1998 Talbert tri-axle detach trailer, 50 ton, 51’x102”, 10’ neck, 27’ well, 14’ rear deck, air susp., open wheel wells, self-contained Honda motor, swing-out outriggers, open deck, 120,570 GVWR, 255/70R22.5 tires on steel rims

1982 Shop-built tandem axle gooseneck trailer, 36', steel deck, fold-down ramps, electric brakes, 12,000 lb. axles

1971 Wisconsin tandem axle tilt bed trailer, 34', 24' tilt bed, New brakes

Tandem axle car trailer, 16', ramps, spring susp., wood deck, 3,500 lb. axles

Shop-built tandem axle bullet nose enclosed trailer, 4-1/2'x12-1/2', canvas roof

1994 Trailmobile tandem axle horse trailer, 3 stall, living quarters, 100 gal. water tank

Carry On single axle utility trailer, 4'x8', mesh floor, mesh flip-up ramp, 5 bolt hubs

Ford pickup box trailer

Donahue trailer, 24’

Donahue combine trailer, 30’7”x12’ wide, tie downs, Bill of Sale only

Single axle snowmobile trailer, 2-place, Bill of Sale only

PULL-TYPE SPRAYERS

Top Air TA2400 pull-type sprayer, 120' boom, 2,400 gal. poly tank, rinse tank, Raven 4400 auto rate controller, triple nozzle bodies, auto height control, Hypro hyd. pump, hyd. steerable hitch, 980/90R54 duals, S/NB23610108

2002 Summers Ultimate sprayer, 90', 1,000 gal. poly tank, Hypro hyd. pump, Raven 450 controller

Redball 680 pull-type sprayer, 90' susp. boom, 1,400 gal. poly tank, Raven 450 monitor, hyd. pump, 5-section booms, rinse tank, triple nozzle bodies, foam markers, radar, adj. axles, 14.9R46 tires, S/N99-00128

NYB skid sprayer, 90', 400 gal. tank, Briggs 5.5 hp. pump, Raven 440 control, Raven valves & flowmeter, electric/hyd. boom lift, manual fold

SELF-PROPELLED SPREADER & SPRAYERS

2000 TerraGator 8103, Terrashift, Falcon controller, John Deere guidance, roll tarp, transmission work in 2016, New bed chain, New vertical auger in 2017  

Melroe 115 spra-coupe, cab, VW motor, 50' booms, 200 gal. poly tank, Hypro pump

CHEMICAL & FERTILIZER EQUIPMENT

2008 Case-IH ADX3430 air seeder cart, hyd., 430 bu. tank, 30.5-32 tires, with Elmers dry fertilizer strip-till applicator, 44', single pt. depth, full run monitors, tires for 24x22" application, applicator S/N82352, cart S/N19511

Side dresser, 16x22", 8 shank, hyd. NH3 valve

Dempster chemical trailer, 1,000 gal., 4-wheel, Hypro hyd. circulating pump, Dempster ground drive pump, 16.5L-16.1SL tires

TerraGator 1603 dry spinner box, 555 Cummins, Fuller 10 spd., no A/C, unknown hrs. but shows 3,155 hrs., S/N1609879

Vogels Wick Weeder rope wick applicator, approx. 44', 5 gal. gravity chemical supply tank, wet boom w/Tee-Jet nozzles

Willmar 800 pull-type fertilizer spreader, hyd. shut-off, ground drive, 540 PTO

Dempster tandem axle fertilizer spreader, approx. 5 ton, SS chain, single spinner, 540 PTOs

Pattison 3200 liquid cart, 4-wheel, (2) 1,500 gal. cone bottom tanks, newer plumbing

Gandy seed treater

(2) 2006 Demco 250 gal. tanks & mounting hardware

(2) 220 gal. saddle tanks, mid-mount brackets, off John Deere 40 Series

30 gal. mix cone

(2) 240 gal. saddle tanks w/brackets

Demco saddle tanks, 300 gal. ea., for John Deere 8000 Series

NH3 EQUIPMENT

DMI 4200 NH3 applicator, 42', coil shank, tandems across

Blu-Jet Landwalker NH3 applicator, 41', tandems across, coil shank

Raven NH3 Super cooler w/controller & (2) distributors

(2) 1,000 gal. NH3 tanks on trailers

1,000 gal. NH3 tank, Trinity spring gear

(2) NH3 trailers, set at 88"

(2) 1,000 gal. NH3 tanks on 4-wheel running gears

(3) 1,500 gal. NH3 tanks on 4-wheel running gears

HAY EQUIPMENT

2014 John Deere 569 round baler, MegaWide Plus hyd. pickup, Cover-Edge surface wrap or twine tie, bale push bar, 1000 PTO, 21.5L-16.1 flotation tires, monitor, S/N1E00569XJEE402086

2014 New Holland BR7090 round baler, net wrap, XTRA sweep, bale ramp, monitor, flotation tires, 1000 PTO, approx. 5,050 bales

Sperry New Holland 849 round baler, 540 PTO, S/N685396, rebuilt, New baler chain

Vermeer 605F round baler, electric twine tie, field ready, recent service

Vermeer 605K round baler, twine tie, monitor, 1000 PTO
1999 John Deere 566 baler, net & twine wrap, John Deere monitor, flotation tires, 540 PTO, 17,115 bales, shedded

Enorossi ER14 hay rake, 14-wheel, hyd. front fold, New

John Deere 670 hay rake, wheel drive, shedded

John Deere 260 disc mower, 7', 3 pt., 540 PTO

John Deere 265 disc mower, 7’, 540 PTO

Self-loading bale carrier, 5 bale cap., New

Industrias Americas 625 bale wagon, dolly front, New

FORAGE EQUIPMENT

John Deere 3950 pull-type corn chopper, 2x30", hyd. adj. spout, rear hitch, 1000 PTO, S/NE03950X681368

John Deere 3950 chopper, 22' head, 1000 PTO

New Holland 707 corn chopper, 1 row, 3 pt., manual spout, hay head attachment, rear hitch

Roorda 225 single axle feed wagon, RH discharge, chain apron, 540 PTO, 15-22.5 tires

Wishek 5014 feed wagon, 2 spd. apron, LH discharge, 540 PTO, (2) spare tires & rims, S/N1005693

Industrias Americas feed wagon, dolly front, New

LIVESTOCK EQUIPMENT

New Holland 790 tandem axle manure spreader, twin beater, 540 PTO, S/N343963

John Deere 450 single axle manure spreader, single beater, slop gate, hyd. push-off, 540 PTO, 10:00-20 tires

(120) continuous fence panels, 20’, 6-bar w/clips & connectors, New

(60) interlocking corral panels, 12’x5’, New

Pallet milking equipment w/vacuum pump

(7) 5 bu. hog feeders

Stampede Steel automatic cattle squeeze chute, automatic ext. headgate, squeeze gates, drop down vet doors, double size exit, brisket bar, palpation cage w/gate

Real Industries cattle chute, automatic headgate, rear gate, swinging side panels

BIN, GRAIN RING & BIN EQUIPMENT

Grain bin, 48’ dia., 9 rings high, approx. 56,000 bu., New aged inventory, includes roof, sidewalls, door & hardware only, New

CMC grain ring, 70', tarp, hardware, never used still in box

Superior full floor aeration floors for various bins: (2) 18’; (2) 21’; (2) 24’; (2) 27’, New

Superior full floor aeration floor, 10’ pieces or smaller, New

(5) Pallets approx. 200 floor supports, 12-1/2” tall, New

(30) bundles grain bin floor flashing, (24) per bundle, New

(2) 10’ wall ladders for grain bin, New

(5) wall ladder cage sections for grain bin, New

CMC grain ring, 17,000 bu., w/tarp, air tube & fan

DRYER & AERATION EQUIPMENT

Farm Fans 14E grain dryer

GSI bin fan, 40 hp., 3 phase, tin damage but operational, New

(2) LP grain bin burners, 28", 3 million BTU

Inline centrifugal fan, 28", 10 hp., 1 phase

(2) Aeration fans, 14", 1 hp., 1 phase

Aeration fan, 18", 3 hp., 1 phase

(3) Keho aeration fans

Centrifugal fan, 10 hp., 1 phase

(19) air tubes, T's, caps

Hyd. bin sweep auger

(6) rectangle aeration tubes

Power bin sweep, 24'x6", New

Bin sweep, 17' w/Baldor motor

Grain bin spreader

GRAIN CLEANERS & GRAIN VACS

Dakon SC2080 rotary grain cleaner, fill auger, electric

DMC 54 grain cleaner, (2) sets of screens, 220v, 1 phase

HiCap 548 rotary grain cleaner, electric motor, discharge auger, (2) sets screens

1995 Kwik Kleen grain cleaner, 5 tube, (3) sets of screens

Kwik Kleen grain cleaner, 7 tube, 7.5 hp. electric discharge auger, (2) sets of tube screens

Kwik Kleen hyd. grain cleaner, 5 tube, wheat & sunflower screens

Sioux rotary cleaner

Conveyair 3000 grain vac, cleanup pkg., extra hoses & pipe

REM 1026B grain vac, 7" pipe & flex hose, cleanup kit, reconditioned

1986 Walinga 1510 Standard Deluxe grain vac

AUGERS

Westfield MK130-111 Plus, hyd. hopper walker, mechanical drive swing hopper, hyd. up/down

(2) 2014 Wheatheart X130x84 augers, 84’x13”, 540 PTO, low pro swing hopper, adj. axles, aged inventory

Westfield MK130-71 auger, mechanical drive swing hopper, hyd. up/down

2014 Wheatheart X130x74 auger, 74’x13”, 540 PTO, low pro swing hopper, adj. axles, aged inventory

2015 Wheatheart X100x73 auger, 74’x13”, 540 PTO, low pro swing hopper, aged inventory

2012 Brandt auger, 110'x13", no swing hopper, hyd. lift, 540 PTO

GrainMaxx 6000HC auger, 95'x13", external mechanical telescoping swing hopper, hyd. swing hopper, small 1000 PTO, New, S/N6395R002

2010 Harvest International auger, 92'x13", factory hyd. hopper swing, hyd. up/down, mechanical swing hopper, 540 PTO

1985 Feterl auger, 84’x12”, side loader

2014 Harvest International H1382 auger, 82'x13", low profile swing hopper

Farm King auger, 82'x12", hyd. hopper mover

Harvest International H1082 auger, 82'x10", low profile swing hopper

Westfield MK100-81 auger, 81’x10”, low pro swing hopper, hyd. lift, hyd. hopper walker, 540 PTO

2013 Wheatheart auger, 74'x13", low profile swing hopper, with 1 yr. old H2 hopper walker, automatic

2007 Westfield WR100-71 auger, 71'x10", electric up/down, less motor

Westfield 100-71 auger, low pro swing hopper, mechanical drive, hyd. lift, 540 PTO, 12v hopper walker

Westfield MK130-71 auger, mechanical drive, swing hopper

Wheatheart SA1071 auger, 71'x10", low pro swing hopper, hyd. lift, 540 PTO

Wheatheart 1071 auger, 71'x10", swing hopper, hyd. lift, 540 PTO

Westfield auger, 71'x10"

Brandt auger, 70'x13", drive over hopper

2001 Feterl auger, 61'x12", mechanical swing hopper, hyd. swing hopper, hyd. up/down, 540 PTO

Westgo 1305 auger, 61'x10", hyd. swing hopper, PTO

Alloway auger, 60'x10", hyd. swing hopper, hyd. lift, 540 PTO

Scoop-A-Second auger, 56'x8", manual up/down, 540 PTO

Westfield TR10-51 hyd. swing auger

Alloway GS20 loadout auger, 48'x8", electric motor mounts, less motor, on transport

Westgo auger, 45', 540 PTO

Peck TA1243EB loadout auger, 43'x12", galvanized tube, factory hopper, electric motor mounts, less motor, on transport, New, S/N311-09084

(2) Peck TA1041P loadout augers, 41'x10", galvanized tubes, 540 PTO, on transports, New, S/N419-19520, S/N419-19521

(2) 2013 Wheatheart R10x41 loadout augers, 41’x10”, electric or gas mounts, less motor, on transports, aged inventory

(2) 2015 Wheatheart R8x41 loadout augers, 41’x8”, electric or gas mounts, less motors, on transports, aged inventory

2016 Wheatheart BH7x41SP loadout auger, 41’x7”, gas motor mounts less motor, hyd. mover kit, hyd. winch, on transport, aged inventory

(2) 2014 Wheatheart R10x36SP loadout augers, 36’x10”, gas motor mount, less motor, hyd. mover kit, hyd. winch, on transport, aged inventory, aged inventory

2009 Wheatheart GHR80-36 loadout auger, 36’x8”, galvanized tube, 7 hp., 1 phase, factory hopper, on transport, aged inventory

Peck TA1031E loadout auger, 31'x10", electric motor mounts less motor, galvanized tube, on transport, New, S/N311-19082

Transfer auger, 40'x8"

Transfer auger, 30'x8", 5.5 hp. motor, 3 phase

Westfield WR80-36 loadout auger, 36'x8", 540 PTO, on transport

Westfield W70-31 auger, 31'x7", no motor

Westfield J208-31 auger, 31'x8", 7-1/2 hp., 220v 1 phase motor

Westfield auger, 36'x7"

Batco 1314 hyd. jump auger

Michaels hopper auger, Westfield J208-31 auger, 31'x8", 7-1/2 hp., 220v 1 phase motor

Westfield auger, 36'x7" fits Wilson hopper bottom

Hutchinson auger, 14'x8", 220v motor

Keho cross-duct for grain bins, up to 24' dia.

Kelly grain leg, 65'x8"x10", 230v, 3 hp., 3 phase

Mayrath roof transfer auger, 65'x10"

Sheyenne Tooling bin top auger, 43'x8", full hanger bearings, electric motor mount less motor, split into (2) sections

(2) Brock roof transfer augers, 35'x10"

(2) Wheatheart transfer augers, 13”, hyd., aged inventory

Westfield hyd. transfer auger, 10"

Wheatheart transfer auger, 8”, electric motor mount, aged inventory

Westfield drive over pit, on wheels, works w/swing hopper

Westfield endgate drill fill, steel flighting

Grain leg support tower, 8'x8'x91'

(2) 7" hyd. hopper augers

2-way splitter, 8", used on bin top auger

Unloading incline auger, 10" w/electric motor

CONVEYORS

2006 Brandt 20110 belt conveyor, 110'x10", hyd. lift, 1000 PTO, on transport, S/N79544

2010 Batco 2095SD conveyor, 95'x20" belt, hyd. up/down, Leeson 40 hp. electric motor, 3 phase

2004 Brandt 1585 belt conveyor, 85'x15", hyd. lift, on transport, S/N74700

Speed King 1245 belt conveyor, 45'x12", 5 hp., 3 phase, on transport

2015 Batco 1535FLTD Field Loader belt conveyor, 35'x15", 7-1/2 hp., 1 phase, single owner, S/N15-00043

Batco 1535 belt conveyor, 35'x15", gas motor, on transport

Batco 1535 Field Loader conveyor, 10 hp. electric, 1 phase

Batco 1535 Field Loader conveyor, Kohler gas motor, hyd. walker, hyd. lift

2018 Batco FX1535TD Field Loader conveyor, 35’x15”, 7.5 hp. motor, 1 phase, New this spring, No fertilizer use

Batco 1814LP belt conveyor unloader, 14’x18”, less motor, aged inventory

Batco 1335 conveyor w/undercarriage, electric motor, 1 phase

2014 Brandt GrainDeck drive over belt conveyor, hyd., single owner

Batco PS2500 drive over belt conveyor, hyd. lift, 7-1/2 hp., 3 phase

(2) Quality Plus 624 conveyors, electric motor, 3 phase

ROTARY DITCHER & SCRAPERS

Liebrecht pull-type rotary ditcher, 8', hyd. wing adj., hyd. gate adj., 1000 PTO, 455/55R22.5 rear tires, spreads up to 120' or pile, set up for GPS, S/N5872

Ashland pull-type scraper, 10 yd., New wheel bearings, blades, & hitch

Letourneau pull-type scraper, 8 yd., hyd. conversion

Midland scraper, 8 yd.

Ashland 45D dump scraper, 4-1/2 yd.

FieldMaster dump scraper, 3-1/2 yd.

BLADES

Hammerack Welding box blade, 14'

Empire Ultrascraper YS10 box blade, 10', hyd. lift

Garfield box blade, 10', hyd. tilt & lift, weight box, heavy duty implement tires, New

RMK pull-type grader, 14', 6-way hyd. adj., weight box, New

RMK pull-type grader, 12', 6-way hyd. adj., weight box, New

Industrias Americas pull-type grader, 14’, hyd. tilt & angle, New

Industrias Americas pull-type grader, 16’, hyd. tilt & angle, New

Shop-built box blade, 10', side tilt, New cutting edge

(4) RMK box blades, 10’, low sides, hyd. lift & tilt, New

(4) RMK box blades, 10’, high sides, hyd. lift & tilt, New

(5) RMK box blades, 12’, low sides, hyd. lift & tilt, New

Industrias Americas heavy duty box blades, hyd. tilt, New: (2) 10’; (2) 12’

Industrias Americas box blades: 5’, 6’, 7’, 8’, (2) 10’, (2) 12’, New

(4) RMK adj. blades, 8’, hyd. tilt & swivel, 3 pt., New

King Kutter blade, 6', Cat II 3 pt.

Box scraper, 60", 3 pt., scarifier teeth

Box scraper, 12’, hyd. lift

CRANES

Grove RT-605 crane, 18 ton, Cat diesel, 4-wheel steer, outriggers

1995 Grove RT500D wheeled rough terrain crane, Cummins, 30 ton, 75' boom, 110' w/jib, hyd. outriggers, 10,000+ hrs., annual inspection, New wire rope 10/20/17, swivel kit 10/30/17, service manuals, S/N79530. View video of crane here: 1995 Grove RT500D Crane Video

DOZER

Komatsu D65E-6 crawler dozer, OROPS, newer 855 Cummins, 3 spd. powershift, semi U dozer blade w/hyd. tilt, 28" single grouser track shoes, 35-37,000 weight, S/N32136

TELEHANDLERS

Caterpillar TH83 telehandler, 8,000 lb., 4WD, 4-wheel steer, outriggers, 8,700 hrs.

2001 Gradall 544D-10 telehandler, cab w/heat, 4WD, rear steer, hyd. leveling, front outriggers, 55' reach, 10,000 lb. lift cap., 6,720 hrs., engine has some blowby, S/N0355882

IR telehandler, 8,000 lb., 4WD, 4-wheel steer, outriggers, 10,800 hrs.

Lull telehandler, 6,000 lb., 4WD, 4-wheel steer, 11,000 hrs.

LIFTS

JLG HX boom lift, 120', 4WD, diesel, 13,575 hrs.

JLG HX boom lift, 120', 4WD, diesel, unknown hrs.

JLG boom lift, 45', 5,120 hrs.

Waldon articulating forklift, diesel, 4WD, 4,000 lbs.

TRACTOR LOADER BACKHOE & HEAVY CONSTRUCTION

Case 580K Construction King Extend-a-hoe loader backhoe, diesel, cab, lights, heater, shuttle shift forward reverse 4 spd., quick attach rear bucket, New 30" bucket, 18" bucket for backhoe, 17.5L-24 rear tires, all new tires, 8,947 hrs.

Quick attach for front bucket to convert from Case 580K backhoe to skid steer loader mount

1997 John Deere 892ELC excavator, cab w/heat, mechanical thumb, 44” bucket, 32” tracks, 8,704 hrs., S/NFF892EX012454

Wahpeton Fabrication ditching bucket, 84”, for John Deere excavator

CONSTRUCTION ITEMS

Skidlift 2030E, 24' working height, universal skid steer loader mount, forklift pockets, manual deck ext., ground or platform operation

Rock grizzly, 8'x10' deck, 2-1/2" spacing, New

Whiteman B-4-8H concrete power trowel, 44", Honda 8 hp.

Light plant generator, diesel, 4,900 hrs.

Light plant generator, diesel, 6,000 hrs.

Light plant generator, diesel, 5,200 hrs.

Light plant generator, diesel, 5,800 hrs.

Schram 60 air compressor, 100 cfm at 90 psi, 4 cyl. engine, on trailer

LeRoi 85GI gas air compressor, 4 cyl. gas, liquid-cooled, 85 cfm, 1,511 hrs., on 2-wheel trailer

TMG walk-behind plate compactor, Kohler gas motor, New

TMG walk-behind concrete saw, 14”, Kohler gas motor, New

Case backhoe bucket, 14”, removable teeth

FORKLIFTS

1994 Toyota 42-6FGCU18 forklift, LP, 2-stage lift, side shift, 3,000 lb. lift cap., S/N67061

Toyota 4430 forklift, LP, hard rubber wheels

Yale walk-behind forklift, battery powered

SKID STEER LOADERS

2002 New Holland LS190 skid steer loader, ROPS, high flow, 2 spd., aux. hyd., weight pkg., 72" bucket, solid no flat tires, S/N197285

1972 Bobcat 600 skid steer loader, Wisconsin motor, dirt bucket, forks, approx. 3,900 hrs., recent engine replacement, New battery, single owner

SKID STEER LOADER ATTACHMENTS

Bobcat bucket, 80"

Jenkins rock/brush bucket w/grapple

Lowe 1650 hyd. auger, 12" & 18" bits, skid steer loader quick tach, New

Stout XHD84-6 brush grapple, skid steer loader quick tach, New

Stout HD72-4 brush grapple, close tine, skid steer loader quick tach, New

Stout HD72-3 rock bucket/brush grapple combo, open end, skid steer loader quick tach, New

Stout walk-through pallet forks, 48", skid steer loader quick tach, New

2016 Washburn square bale spear, (4) bale spikes, designed to lift 3 bales high, skid steer loader quick attach mount

Waubun Steel skid steer tree spade, standard flow hyd.

Regular pallet forks, 48", skid steer loader quick attach, New

(2) Bobcat attachments

Asst. Brute rock buckets: 66”-84”, 4” tine spacing

Asst. Brute skeleton buckets: 75”-84”, 4” tine spacing

Brute skeleton grapple, 66”, 4” tine spacing

(2) Brute root grapples, 70” & 80”, 8” tine spacing

Brute solo root grapple, 52”, 8” tine spacing

(2) Brute tree and post pullers, up to 8” trees

Brute heavy duty brush mower, 72”, cuts up to 3’ trees

(4) Brute universal quick attach plates

(2) Brute receiver hitches

(2) Brute pallet fork ext. sets, 84”

Hawz rock & brush grapples: 68”, 75”, 78” & 84”, 4” tine spacing

Hawz heavy duty brush mower, cuts up to 3” trees

(2) Hawz tree & post pullers, up to 8” trees

(2) Industrias Americas bale spears, universal skid steer loader mounts, New

(3) Industrias Americas general purpose buckets, 72”, universal skid steer loader mounts, New

(2) Industrias Americas tree/post pullers, hyd. cylinder, universal skid steer loader mounts, New

TMG trencher, 7”x35” trench, 12-24 gpm required, universal skid steer loader mounts, New

Amoel pickup sweeper, 72”, universal skid steer loader mounts

(2) TMG grapple buckets, 72”, (2) grapples w/hyd. cylinders, universal skid steer loader mounts, New

(3) TMG hyd. skid steer dozer blades, 94”, hyd. angle, spring trip, bolt-on cutting edges, New

(4) Maxam 12-16.5 skid steer loader tires, 12-ply

Erskine tree shear, flat-face hyd. couplers, hyd. cyl., rotates 90 degrees, 12" dia. cap., skid steer loader mounts, S/N1032522

Walk-through pallet forks, 5,500 lbs., 60” tines, for skid steer loader, New

Walk-through pallet forks, 5,500 lbs., 48” tines, for skid steer loader, New

Walk-through pallet forks, 4,000 lbs., 48” tines, for skid steer loader, New

Double tine bale spear, for skid steer loader, New

MOWERS

Woods 3240 batwing mower, 20', 1000 PTO

Woods RM660 mower, 3 pt., 540 PTO, front & rear caster wheels

Massey Ferguson 1051 brush mower, 6', Cat I, 3 pt.

Buhler grooming mower, 72", 3 pt., 540 PTO

Woods belly mower, 72", w/mounts and drive

Industrias Americas mower, 10’, 3 pt., tail wheel, 540 PTO, New

Industrias Americas mower, 7’, 3 pt., tail wheel, 540 PTO, New

Jari sickle bar mower, 4 hp.

Woods mower, 3 pt., needs work

OTHER EQUIPMENT

Hutchinson pile unloader, 10' wide, 2 pt., 540 PTO, broken drive shaft, S/N914447

Kuhn drill transport, 40'

Hydro Ax 611B2 brush cutter, Cummins 6 cyl. turbo diesel, 8' cut, 400 lb. torque, 30.5-26 forestry tires, S/N2889

Command Hydraulics self-contained aux. hyd. booster, 32 gpm pump, hyd. cooler w/electric fan, 20 gal. tank, large 1000 PTO

Scoop-type rockpicker

Hyd. laser mast

Hyd. laser mast for scraper

Shop-built 3 pt. trailer mover, Cat II and Cat III narrow

Sukup 3 pt. auto guide

4-wheel wagon, 12'x7' wood truck box, David Bradley running gear

Swather transport, 2-wheel

Harrow section, 3-bar

(2) 2-bar harrow sections

TMG heavy duty rototiller, 80”, 17” rotor, 3 pt., 540 PTO, slip clutch, New

TMG log splitter, 30 ton, gas motor, self-contained hyd., vertical or horizontal, towable trailer, New

Log splitter

Bearcat wood chipper, Kohler 25 hp. gas motor, 2" ball hitch

Small trailer dolly

Uniden radio set includes handhelds, base units, charger

Elston gopher getter, 3 pt.

Lowe posthole auger bit, 15", New

(2) TMG BX42S wood chippers, 3 pt., 540 PTO, adj. spouts, 40-70 hp. rated, New

ATV yard sprayer, 15 gal., 12v pump, folding spray boom

2016 Loftness GBL10 grain bagger, 10’, electric bag lift, 1000 PTO

Sands front-mount guidance w/single rib tires

Midland land plane, 40’x15’

RECREATION

1984 Checkmate speed boat, 16', Mercury 115 hp., 2-stroke, bunk trailer

Montgomery Wards aluminum fishing boat, 14', Evinrude 4 hp. motor & trailer

Four winds open bow runabout boat, 16’, Johnson 90 hp., 4-stroke motor, on trailer

Arctic Cat Tiger Shark Barracuda personal watercraft, 650cc, 72 hp.

2003 Honda Rancher ATV, 4x4, electric shift, 6,734 miles

Cushman 3-wheel truckster, 4WD, hyd. dump box

Old Town Camper fiberglass canoe, 16’

SUVS, VANS, CARS & BUS

2008 Toyota Camry SE, 4 door, 2.4L, automatic, power windows & locks, cloth, 215/55R17 tires on aluminum rims, 156,097 miles

2005 Chevrolet Express van, 1 ton, 6.0L gas, automatic, 2WD, (2) front bucket seats, power windows & locks, shelving in back

1994 Dodge cargo van, one ton, 318 V8 gas, automatic, A/C, power windows & locks, AM/FM, 2" receiver hitch, shows 193,000 miles

1984 Ford E350 van, 6 cyl., automatic

2008 Ford Escape SUV, front wheel drive, 2.3L 4 cyl., 4 spd. automatic, front bucket seats, Astrostart, 154,000 miles, fresh oil change, slight surface rust around rear window and above windshield, transmission 2nd gear issue

2007 Jeep Patriot Limited, 4 door, 2.4L, automatic, 4WD, 215/65R17 tires on aluminum rims, 167,765 miles

1997 Chevrolet K20 Suburban, 350 V8 gas, automatic, 4WD, newer tires, 294,000 miles

1993 GMC Suburban, 5.7 gas, automatic, 4WD

Ford Econoline ambulance chassis

People Mover, Ford Powerstroke 7.3L, automatic, 16 seats including driver and passenger, 14,050 lb. GVWR, LT225/75R16 tires, 276,943 miles

LAWN & GARDEN

2015 John Deere 1570 Terrain Cut front deck lawn tractor, folding ROPS, 37 hp. diesel, hydro, Fastback 72” rear discharge commercial deck, 275 hrs., S/N1TC1570VHFS010240

John Deere 345 lawn tractor, gas, 54" deck

John Deere 285 lawn tractor, 52” deck, 600 hrs.

Woods 1850 Mow-N-Machine zero turn lawn tractor, gas, 50" deck

John Deere LX188 lawn tractor, 48" deck, bagger, front-mount thatcher, 38" snow thrower

Husqvarna riding lawn tractor, 48" cut, 380 hrs.

Craftsman LT1000 riding lawn tractor, 18 hp., 42" deck

MTD lawn tractor, 14 hp., 42" deck

John Deere 110 lawn tractor, gas, 34" deck, restored

Wheelhorse B80 lawn tractor, gas, 34" deck

Craftsman rear-tine tiller, 208cc

Estate Super Hauler dumping yard cart, 600 lb. cap., 1-7/8" ball hitch, knobby ATV tires, New

John Deere pull-behind poly garden cart

Gas push mower

Jacobson reel mower & grass catcher

John Deere JX75 push mower, 5 spd., bagger, mulcher

Billy Goat lawn vac

(2) fertilizer spreaders

(2) 100' garden hose reels, on wheels

Poly push yard cart

Pull-type lawn sweeper

SHOP EQUIPMENT

2016 Magnum hot water pressure washer, 4000 psi, 3.5 gpm

Aaladin 12-325EL hot water pressure washer, 2500 psi, 230v, 1 phase, Newer pump, heats & works but needs tune-up

Tahoe gas pressure washer, 2700 psi, Honda gas motor

Rotunda air compressor, 80 gal. tank, 240v, 3 phase, 3 cyl., S/N398103

Air America air compressor, 110v

1993 Gardner Denver rotary screw air compressor w/air dryer, 25 hp., 208/230v, 3 phase, worked when taken out of service

Castair 60 gal. air compressor

Campbell Hausfeld air compressor, 60 gal.

CNC machine w/asst. tooling

Punch press with asst. dies

Vertical band saw, 3 phase

Bainbridge band saw, 110v

(2) wheel balancers, heavy duty, 120v, 200 rpm, New

(2) heavy duty tire changers, 120v, 10”-22” outside clamping, New

TMG 2-post car hoist, heavy duty, 8,800 lb. cap., 3 hp. motor, New

Buddy Lube oil bar, (2) 35 gal. compartments, (2) 70 gal. compartments, drip tray, stand, storage compartment

Coats Pro Ride tire balancer

Coats 1010 tire changer

Coleman PowerMate generator, 8 hp., & Knipco heater

Kohler generator, 1500 watt, older unit

Onan gas generator, 1.5 kw, 1 hp.

Belt-driven generator

Gray TNT50 portable air lift, 8,000 lb. lift

Overhead chain hoist, 2 ton

Engine stand

Reddy Heater 170T kerosene/diesel fuel

Snap-on 6-drawer toolbox on rolling cabinet w/side cabinet

Stanley vac with hose

Pancake air tank w/couplers & regulator

Toolshop chop saw, 14"

Pallet misc. tools

(4) Shop tables, 31"x44"

(3) Metal shelving units, 3'x7'

30 gal. oil caddy w/electric pump & hoses, on cart

Parts washer

Vise

Set heavy duty rollers for moving equipment

Steel table & vise, 3'x6'

Steel work table, 4x8

Tool cabinet, 88”, heavy duty, (32) drawers, (4) doors, New

(2) steel work benches, 10’, (20) drawers, 40” steel pegboard, New

Shop toolbox, 6-drawers, side pull-out

(3) Lion steel parts bins, 120 drawers

(2) John Deere power luber grease guns w/(6) batteries & (4) chargers

(2) Lincoln grease guns, 12v, (4) batteries, (2) chargers, (1) extra charger & battery

Skil 1/2 phase router & router table; small propane gas cyl., Skil 10" band saw; stationary saber saw; Craftsman 10" compound miter saw; B&D 7-1/4" circular saw

Air impact wrench kit, 1/2"; Cummins small press drill; utility table, 32"x8.8" long; air pressure hose, 150'+/- w/air couplers

Asst. 18-36" shelving w/wall brackets

(2) warehouse carts

(2) shelf units for vans

(2) aluminum stepladders

TANKS

Enduraplas poly tank, 6,000 gal., 3" valve

3,000 gal. poly tank, 3” fittings

2,100 gal. poly tank, 2" outlet

1,900 gal. poly tank, 2" outlet

1,000 gal. poly tank w/steel cradle

425 gal. poly tank, 2" fitting, fits pickup box

Poly water tank, 110 gal.

Poly water tank, 60 gal.

Pleasure Products fiberglass water tank, 300 gal., designed to fit in pickup

Fuel tank, 60 gal., hand pump, New paint

2,000 gal. fuel tank, Gasboy pump

1,000 gal. fuel tank, 12v pump

(3) 1,000 gal. fuel tanks, Gasboy pumps

1,000 gal. fuel tank, twin wall, no pump, New

250 gal. fuel tank, Gasboy pump, meter & hose w/shut-off nozzle

Fuel service tank, 140 gal., 15 gpm, 12v pump

(2) 75 gal. fuel tanks w/toolboxes

(2) portable diesel fuel service tanks, one w/pump, filter, hose & nozzle

Split fuel service tank, 50 gal./150 gal., electric fuel pump & hand pump

Aluminum fuel tank

Pallet (2) 100 lb. LP tanks

TRACKS & TIRES

(2) Camoplast 36" tracks, for Challenger MT800, excellent guide blocks

(2) Firestone 16.5-16.1 tires and rims, New

Firestone 11:00-16 single rib tire and rim

Firestone 21.5-16.1 tire, New

Firestone Super All Traction 8-19.5 tire w/offset rim for duals

(2) Firestone Super All Traction 8-19.5 tires

(4) Goodyear DynaTorque 18.4R46 radials, 50%

(2) Goodyear DT800 380/90R50 tires, 50%

(2) Goodyear 14.9-24 tires on 8-hole rims

Goodyear 8-19.5 radial tire

(2) Goodyear 24" tracks, for John Deere 8000T

(2) Goodyear 30" tracks for Case-IH STX

Goodyear 30" track, for Case-IH 9300

(2) Goodyear 18.4-38 tires, 70%, on John Deere rims 

(3) Michelin 8R19.5 radial tires w/offset rims for duals

(4) Trelleborg Twin 414 750/65-38 tires

(6) 31x13.50-15 tires

(2) 7.6-15 tires and rim

(8) 20.8-42 bias ply tires on Case-IH silver rims

Pair 18.4-38 tires & rims, 10-bolt hubs

(2) 13.6-38 tires & tubes

(2) 6.00-16 tires and tubes

(3) 12-16.5LT trailer tires

(2) single rib tires on rims

(2) 21L-24 industrial tractor tires, 70%

17.5L-24 industrial tractor tire, New

Pallet misc. tires

7.5-16 rib tire

(2) 7.5-16 rib tires on 8-hole rims

(2) 7.5-16 rib tires on 6-hole rims

(2) 11L-16 implement tires, on 6-hole rims

(2) 24.5-32 tires

(2) 14.9-24 tires

(2) 23.1-30 tires on bevel rims, cast axle mounts from John Deere 4020

(2) Hi-Run ST235/80R16 tires

(4) Michelin 320/90R50 tires on 17-1/2" offset rims

Trail Express ST225/75R15 tire on 6-bolt rim

(3) sets of 445 22.5 Super Single tires on aluminum pilot rims

(100+/-) misc. 22.5 & 24.5 truck tires

(12) 900-20 tires

(12) 10:00-20 tires

(12) 11-22.5 tires

(8) 11R22.5 truck tires

(4) 245/70R17 tires

(3) asst. truck tires

(8) 11-22.5 implement tires

(4) Model A wheels & tires

(2) steel spoke wagon wheels

(2) hay rake iron wheels

(4) Mickey Thompson 15” rims, 6-hole, w/tires

(2) Titan 12.4-30 single rib tires on Case-IH open center rims

(2) Galaxy 12.4-30 single rib tires on John Deere rims

(4) Firestone 9.50-16.5LT tires

(5) 26.5-25 wheel loader tires

(2) Goodyear 800/70R38 tires

(3) 295/75R22.5 tires on steel rims(8) 10:00-20 tires on Dayton rims

(8) 10:00-20 tires on Dayton rims

PARTS

B&W 5th wheel plate for Chevrolet long box

Cary hyd. air fan

Caterpillar 3306 engine, 2,000 hrs. on overhaul

Concord air manifolds for 40' of implement

Drum Hydrapack hyd. oil cooler wet kit w/pump

Ford air flow tailgate

Ford 8' pickup box, off F250 w/bumper, green

Haukaas sidearm markers, off 40' no-till unit

(2) fuel tanks: aux. tank for John Deere & steel 50 gal. tank

John Deere fenders, off 4020

(3) Sets of (3) John Deere small wire concaves

(3) Sets of (3) John Deere round bar concaves

John Deere lift assist for 12 row cultivator

Killbros gravity wagon auger, 12'x6" w/hyd. motor

Lankota stalk stomper attachment, 18 row, off JD 618 head

MacDon finger reel, 20' w/IHC 810 mounted ends

Micro-Trak NH3 automatic controller, manifolds, hose, Micro-Trak MT3000 spray monitor

Midwest 19-1/2' aluminum truck box, hoist, pump, roll tarp

Shocker air-cushioned 2" receiver hitch

Tilt hood cab for C60 truck

(2) Spray-Foil air fans

Titan skid steer loader hitch

(2) Westgo 6' axles w/hubs and rims

Westgo takeout auger tube, 21'x8", for under grain bin, (2) slide gate openings, New, no auger flighting  

(2) Westgo takeout auger tubes, 27'x8", for under grain bin, (3) slide gate openings, New, no auger flighting  

WIC belted beet harvester chain w/sprockets

Wil-Rich hyd. folding spray boom, 90'

Year-A-Round cab for John Deere tractor

Pallet misc. hyd. controls & hose

(250+/-) cone weights

(3) aluminum headache racks for semis

(2) John Deere 40 Series corn row units, rebuilt w/New stalk rolls

Cat III quick hitch for 3 pt.

(27) NH3 hardened knives for chisel plow

(30) NH3 knives for chisel plow

(26) NH3 tubes for chisel plow

Stainless steel tank, 800 gal., off RoGator

(3) pallets field cultivator sweeps

Trailer frame, (2) 7,000 lb. torsion axles, (4) ST235/80R16 tires

(2) 3,500 lb. torsion axles w/hyd. brakes, (4) 205/75R15 tires w/white spoke rims, New

Pair axle assemblies w/(4) Galaxy 12.5-15SL implement tires, 12-ply

Rock tray for 4WD tractor

(35) JD mulch tiller shanks

(8) John Deere air drill manifold towers

Factory straw chopper for John Deere 9500

Straw walker for John Deere 9500

Final drive extensions for 9000 Series

10-bolt dual axle extensions

Finger reel, 20'

Pallet asst. sweeps & spikes for chisel plow

Pallet asst. NH3 parts

Pallet asst. Precision planting parts

Pallet asst. carbide tips for dry fertilizer applicator

Pallet of asst. parts

Draw pin Cat 5 for JD 9000 tractor

Rear hitch for cultivator or chisel plow

Hopper ext., off IHC 1480 

Large hopper exts. for John Deere 9870 and 9860

Pallet asst. hyd. cylinders

(52) Salford coulters, 19"

(160) Wil-Rich cultivator shanks

(2) pallets John Deere chisel plow parts

Pallet John Deere combine parts

Pallet hyd. cylinders

Pallet V-belts

Pallet harrow teeth

Rear end housing for Versatile 850

Truck hoist

Trailer hoist

Tag axle for truck, air up/down

Tag axle for truck, spring up/air down

Pallet of fans

Pallet depth gauge wheels for air seeder

Stump jumper and blades for HX15 mower

Set running boards for Chevrolet Trailblazer EXT

Tonneau cover for 8' pickup

Bullet hitch w/Warn 12v winch

(39) 2" chisel plow points

Concaves, concave ext., misc. parts for New Holland TR97

(2) 16-34 John Deere rims w/poor tires

(16) suitcase tractor weights & bracket

3-panel grain bin door, New

Tractor quick coupler

Cat II 3 pt. quick hitch

Tractor weights

Row guides

750 lb. cast iron Case tractor weight

Case axle hubs for tractor duals w/bolts

MISC. ITEMS

(2) storage containers, 8’ & 9’, window, door, lockbox, fork pockets

Peak ceiling double door storage building, 20’x30’x12’, roll-up door, galvanized tubes, commercial fabric, New

Super ceiling container storage building, 30’x40’x15’, commercial fabric, waterproof, UV & fire resistant, New

Party tent, 20’x40’ w/sidewalls, windows & zipper door, New

(2) Marquee party tents, 16’x22’, powder coated frame, PVC fabric, (8) removable sidewalls, (7) windows, zippered door, white, New

(13) pieces 8"x31'x12 gauge tube

(18) pieces 8"x25'x12 gauge tube

Approx. 3-4 lumber bundles, 2"x6"x8'

Bundle pine tongue & groove, 1"x4"x9'

Pallet landscaping blocks

Fiberglass topper for Ford F150

5th wheel hitch for pickup camper

Insulated overhead door, 24'x16', used

(2) pallets asst. New steel pcs., tubing & flat, asst. sizes

(3) 33' pieces 6" drain tile pipe

New log siding: (11) 16’x6”, (4) 6’x6”

Misc. dimensional lumber including pine & green treat

(2) planter boxes, 6’x12”x12”, metal-lined w/brackets

(150) bricks

Asst. landscape blocks

(2) faucets

Coleman furnace, 100,000 BTU, used one year, like new

(2) coal-fired water heaters

(3) furnace blowers

Commercial electric stainless oven and griddle combo

Graco paint sprayer

FARM SUPPORT ITEMS

(2) Super Reel hose reels

Robin/Subaru horizontal shafts, 22 hp. & 28 hp.

Pallet w/Honda GCV 160 vertical shaft & Briggs 163cc vertical shaft

Pallet w/Briggs 306cc horizontal shaft, Robin/Subaru SP210 horizontal shaft, Robin/Subaru SP170 horizontal shaft

(5) electric motors: 1.5 hp., 3 hp., 7.5 hp., (2) 10 hp., all 1 phase

Pickup toolbox, flush-mount, fits Ford Ranger

Pickup cross box tool chest

Pickup toolboxes for both sides of 8' box, locking compartments

Crossbox toolbox

Crossbox toolbox, single lid, diamond plate

(2) aluminum wheel well side toolboxes

Aluminum side rail chest for semi tractor

Pallet 6' fence posts

Pallet (6) rolls barb wire

Pallet misc. including electric fencer

(2) pallets fence posts

Pallet misc. including Smith cutting torch

Pallet with Fimco 14 gal. lawn sprayer; receiver drawbar, 1-1/4" w/3/4" hole; 2" receiver drawbar w/1" hole and 2-5/16" ball

Utility sprinkler water pump, 1/2 hp.

Simer water pump, 1 hp., 115v

Box pallet of electric wire, flex conduit & electric boxes

(3) Sets teardrop racks, 10' H x 36" D x 10' W, each w/(3) sets cross braces (shelves), uprights rated at 27,000 lbs., cross braces rated at 5,200 lbs.

(3) Interlocking steel decking, (27) 12L x 9" W

Several lots teardrop-style pallet racking including asst. uprights and beams

Water pump 4", PTO

Water pump hose, 6"

(2) gable end vent fans

Double wall vent pipe & cap, 38’ 6”

Full side toolbox

(3) pickup toolboxes

(2) electric motors, 5 hp., 220v, 1 phase

47' radio tower

(2) pallets misc. farm supplies including hyd. pump

AGIRON WEST FARGO

701.237.9173

Equipment Check-in:

Monday, July 23 - Friday, July 27, 9AM-5PM, please call our office for details.

Fairgrounds is open from 9AM-5PM July 23-27, 30 & 31 for equipment viewing.

TERMS: All items sold as is where is. Payment of cash or check must be made sale day before removal of items. Statements made auction day take precedence over all advertising. $35 documentation fee applies to all titled vehicles. Titles will be mailed. ND Sales Tax laws apply. Canadian buyers need a bank letter of credit to facilitate border transfer.

Downloads:
AgIron West Fargo Event Map & Times