FARM EQUIPMENT AUCTION

LOCATION:  From east edge of Gary, MN, 5 miles east on Co. Road 19, 2-1/2 miles north on 430th St., west side of road.  (2751 430th St, Gary, MN 56545)

AUCTIONEER'S NOTE:  Major equipment begins selling at 10:30 AM. Live online bidding available on major equipment. 

TRACTORS

1978 Versatile 875, 4WD, CAH, 855 Cummins, 12 spd., 4 hyd., 20.8R38 duals, shows 5,655 hrs., S/N52619

1989 Case-IH 7130, MFWD, CAH, powershift, 3 hyd. return flow, 3 pt., quick hitch, 1000 PTO, diff lock, (18) front weights, 380/85R30 front tires, 14.9R46 hub duals, approx. 8,621 hrs., S/NJJA0011968

1973 IHC 1066, 2WD, cab, 2 hyd., jobber 3 pt., 540/1000 PTO, Dual 3100 hyd. loader, 8' bucket, 18.4-38 hub duals, insides are 90%, shows 9,741 hrs., S/NU027910

COLLECTIBLE TRACTORS

Allis Chalmers WD45, gas, wide front, 1 hyd., rock shaft, 540 PTO, 13-28 tires on power slide rims, runs, S/N45-84278

Allis Chalmers WD45, gas, wide front, 1 hyd., rock shaft, 540 PTO,13-28 tires on power slide rims, wheel weights, ran when parked, S/N45-83381

1952 Ford 8N, wide front, gas, 3 pt., 540 PTO, hyd. loader, 40" bucket, S/N478009

1949 IHC C, wide front, gas, 540 PTO, Woods L59 belly mower, S/N35111

1945 IHC H, wide front, gas, 540 PTO, Farmhand hyd. loader, S/N198364

HARVEST EQUIPMENT

2008 Case-IH 8120T, axial flow, PRWD, luxury cab w/red leather, Field Tracker, Pro 600 display, 252 receiver, integrated auto steer, 21' unload auger, manual folding hopper, single pt. hookups, fine cut chopper, rock trap, feeder house reverser, diff lock, electric mirrors, 2 sets concaves & lower sieves, HID lights, 36" tracks, clear cap idlers, 28L-26 rear tires, 1,546 sep. hrs., 2,233 engine hrs., rear sprockets & bearings on feeder house New in 2018, S/NY9G205903

2010 Case-IH 2608 chopping corn head, 8x30", AHH, flex shafts, cob savers, poly snouts, single pt. hookup, end rollers, extra parts, S/N676590004

Shop-built single axle header trailer, 25', flex bar

Shop-built single axle header trailer, 14'

GRAIN CART

Ficklin CA15000 grain cart, 750 bu., 1000 PTO, 13" front corner auger, roll tarp, 30.5-32 tires

PLANTER

2006 Great Plains YP1625-32TR vacuum planter, CCS, 16/32 twin row, front-fold, 2 pt. hitch, half-width disconnect, population & blockage monitor on all rows, hyd. drive w/in-cab rate adjust, spring down pressure, Martin floating trash whippers on all rows, hyd. markers, liquid fertilizer in furrow, (2) 175 gal. poly tanks, digital scale on seed tank, corn & bean meters, 380/90R46 rear tires, lots of extra parts, S/NA1074B

FIELD CULTIVATORS

Wil-Rich Quad 5 field cultivator, 50', 5-section fold, full floating hitch, double spring, edge-on shanks, 7" knock-on sweeps, gauge wheels, rear hitch & hyd., Summers 3-bar harrow, S/N453567

Wil-Rich field cultivator, 40', walking tandems across, 3-bar harrow, Gandy 6216 granular applicator

Wil-Rich field cultivator, 38', walking tandems across, 3-bar harrow

Wil-Rich field cultivator, 38', walking tandems on main, rear hitch

IHC field cultivator, 18', single wheels, No harrow

DISC RIPPER, COULTER CHISEL & OTHER TILLAGE

Case-IH 730C disc ripper, 7 shank, 30" space, lead shanks, 10" pts., covering points, rear disc levelers, 16.5L-16.1 flotation tires, S/NJFH0029076

Steiger 2213 coulter chisel, 16', 13 shank, 15" space, front disc gangs, flotation tires, rear buster bar, (1) disc gang needs to be reassembled & installed, all parts are on a pallet, S/N221300701

Flexi-Coil 75 hyd. coil packer, 50', 5-section fold, long hitch, tandems on main, wing gauge wheels, S/NT081793

Shop-built land roller, 54', rear fold, hyd. lift

Taylor-Way tandem disc, 18', spring assist folding wings, 10" space, 21" notched blades, tandems on main 

IHC 55 chisel plow, 25', 12" space, 3-section fold, walking tandems on main, Summers 3-bar harrow

John Deere 1610 chisel plow, 25', 12" space, 3-section fold, walking tandems across, Summers 3-bar harrow, S/N213

IHC 700 pull-type plow, 8x16", spring trip, on-land hitch

IHC 770 pull-type plow, 6x16", spring tip, front (5) bottoms have been bolted up, used for ditching

Herman multiweeder, 52', 3-rank retractable S-tines, 4-bar harrows, hyd. track eliminators

Alloway row crop cultivator, 3 pt., 8x30", (3) S-tines per row

SEMI TRACTORS

2004 Freightliner Columbia tandem axle, day cab, C-12 Cat, 10 spd., engine brake, air susp., cruise, diff lock, dual aluminum fuel tanks, 170" WB, full poly fenders, 295/75R22.5 tires on steel rims, 645,506 miles

1999 Volvo VNL64T tandem axle, day cab, N14 Cummins, 10 spd., engine brake, air susp., cruise, diff lock, dual aluminum fuel tanks, 2-line wet kit, HR rear receiver hitch, brake controller, 180" WB, full SS fenders, 295/75R22.5 tires on steel rims, 660,686 miles

TRUCKS

IHC Fleetstar 2000 tandem axle, Detroit diesel, 9 spd., diff lock, 20' steel box, hoist, roll tarp, 11R22.5 tires on steel rims, frame has been welded

1979 IHC 2275 tandem axle, Detroit diesel, 9 spd., diff lock, 20' flatbed, (2) 1,500 gal. tanks, mix cone, Honda GX160 2" transfer pump, rear platform for pump & mix cone, 11R24.5 tires on steel rims, 379,350 miles

1960 Ford C-600 single axle cabover, gas, 5&2 spd., 16' box, hoist, 9.00-20 tires, shows 10,122 miles, been sitting many years

TRAILERS

2014 Maurer tandem axle aluminum hopper bottom, 40'x96"x66", ag hoppers, air susp., air scale, Shur-Co electric roll tarp w/remote, 285/75R24.5 tires on steel rims, single owner

2009 Timpte Super Hopper tandem axle aluminum hopper bottom, 40'x96"x66", ag hoppers, air susp., air scale, Thunder electric roll tarp, 11R22.5 tires on steel rims

1984 Southwest tandem axle flatbed, 30'x96", spring susp., steel bulkhead, 11.00-20 tires on steel rims

SPRAYER & CADDIES

Shop-built self-propelled sprayer, Marflex 80' aluminum suspended booms, 1,250 gal. tank, belt drive pump, TeeJet 3-section controller, hydro, cab, frame, axles, engine & trans. are from an IHC 915 combine

Dempster 4-wheel running gear, 1,000 gal. fiberglass tank, hyd. agitation pump, ground drive pump, 16.5L-16.1 flotation tires

Shop-built tow-between chemical caddy, 750 gal. poly tank, flotation tires

SEED TENDER & GRAIN HANDLING EQUIPMENT

2016 Meridian 400 SLD seed tender, 400 unit, dual compartment, 180 degree swing conveyor, roll tarp, No scale, remote control, Honda GX340 gas electric start motor, on tri-axle bumper hitch trailer, torsion suspension, S/N55281

Kwik Kleen 772 grain cleaner, 7-tube grain cleaner, 7-1/2 hp., 1 phase, on transport, (2) sets screens, S/N002

2005 Westfield MK130-81 low pro swing hopper auger, 81'x13", electric hopper walker, hyd. lift, 540 PTO, S/N166392

Farm King 1370 low pro swing hopper auger, 70'x13", electric hopper walker, hyd. lift, 540 PTO, S/N21900160

1986 Westfield W80-51 loadout auger, 51'x8", 540 PTO, on transport, S/N13883

2014 Westfield WC1335 belt conveyor, 35'x13", 7-1/2 hp., 3 phase, on transport, S/N260549

SCRAPERS & DITCHER

Letourneau hyd. conversion scraper, approx. 10 yd., pull-type, dolly front

Midland M44 pull-type dump scraper, 4 yd., dolly front, S/N672

Rust-Built cone wheel ditcher, 3 pt.

ROUGH TERRAIN FORKLIFT

Pettibone Super 4 rough terrain forklift, high lift, 4WD, 4-wheel steer, 4 cyl. gas, 42" forks, 12.4-24 tires, S/N4-477

OTHER EQUIPMENT

Summers 700 reel-type hyd. rockpicker, 3-bat reel, hyd. dump, offset hitch, flotation tires

Melroe fork-style rockpicker, hyd. dump

Woods BW18000 batwing mower, 10', single wing, weight box, safety chains, tandems on main, 1000 PTO, S/N1143317

Woods M5 rotary mower, 5', 3 pt., 540 PTO, solid tail wheel

Lorenz 9101 snowblower, 108", 3 pt., double auger, hyd. spout & tip, adj. skid shoes, 1000 PTO, S/N1114

Trimble FM-750 display, WAAS signal, AG25 receiver, EZ-Pilot steering wheel, IMD-600, wiring harness

SHOP EQUIPMENT

Honda gas pressure washer, cold water, 11 hp. Honda motor, on rolling cart

Sullair 185 air compressor, 185 cfm, Cat diesel motor, on 2-wheel trailer, lights

Industrial Air upright air compressor, 80 gal., 5 hp., 1 phase, 240v, 2-stage compressor

Saylor-Beall upright air compressor, 60 gal., 5 hp., 1 phase, 240v

Lincoln Ranger 250GXT gas welder/generator, 250 amp, 10,000 watt, 110/240v, welding leads, includes shop-built rolling cart, S/NU1120809420

Lincoln AC/DC welder, 225/125 amp, welding leads

Miller Thunderbolt XL AC/DC welder, 225/150, welding leads, on shop-built rolling cart

Norco 82990C HD portable air-lift jacks, 10 ton, handle & wheel kit

Norco HD wide-stance jack stands, 10 ton

UTV & ATV

2006 Arctic Cat Prowler XT UTV, 4WD, 650cc, cab, front & rear hitch, front winch & brush guard, dump box, diff lock, New tires on aluminum rims, 371 hrs., 4,229 miles

1990 Yamaha Warrior 350 ATV, 350cc, 4-stroke, 2WD, electric start, reverse, front tow hitch, (2) sets of rear tires & rims

TRACKS & TIRES

Set (2) Camoplast B32BF03177 tracks, 30", for Case-IH 8120 combine, New

Steel combine tracks, 36", rubber pads, fits combines with 10-bolt pattern

Steel combine tracks, 36", fits combine with 10-bolt pattern

(2) 13-26 tires on 8-hole rims, fits rear axle of combine

(8) 30.5-32 tires, 30%, off 4WD tractor

(8) 20.8R42 tires, 30%, off 4WD tractor

(2) 24.5-32 tires on 10-hole rims, fits combines

FARM SUPPORT ITEMS & PARTS

(2) 1,500 gal. poly tanks, 2" valves, one yellow, one black

(3) Corrugated culverts, (1) 18"x20' & (2) 12"x20', New

Pallet assorted Case-IH 730B ripper parts

Asst. Case-IH combine parts for 88 Series, sieves, concaves, etc.

Asst. parts, tires, etc.

DAVID MATSON ESTATE

Andrew Matson & Scott Hagy, Co-PRs

or Tadd Skaurud at Steffes Group, 701.237.9173 or 701.729.3644

Downloads:
David Matson Estate Farm Equipment Auction Sale Bill