AGIRON WEST FARGO EVENT

LOCATION: Red River Valley Fairgrounds, 1805 West Main Ave, West Fargo, ND. I-94 & Exit 343. Enter Fairground from the East at Grand Stand Avenue.

AUCTIONEER’S NOTE:  Auctioneers will run 6 total auction rings with live online bidding available on 3 of the rings.  Rings 1, 2 & 3 LIve Online Bidding will begin at 9:15AM.  There will be no loading assistance until 3:00PM on sale day.  Cars and pickups may enter grounds at 12:00 Noon for self-loading.  Equipment removal by Friday, August 1, unless other arrangements are made.  Hauling and loading are available.  Contact auctioneers for owner information, new consignments, or changes at 701.237.9173 or 800.726.8609.


See a Map of the 6 Auction Rings at the Fairgrounds Above in the "Download Auction Flyer"

Early Bidder Registration at Fairgrounds Monday, July 28 &
Tuesday, July 29 from 9:00AM - 5:00PM

TRACK TRACTORS

2012 JD 9560RT, deluxe cab, JDLink, powershift, 4 hyd., integrated auto steer, wide swing drawbar, HID light pkg., radar, deluxe radio, mirrors, idler weights, front weights, 36" Camoplast tracks, 482 hrs., PowerGard warranty until  6/23/15, S/NRW9560RHCP901468

2012 JD 9560RT, deluxe cab, leather trim, JDLink, powershift, 4 hyd., wide swing drawbar, front suitcase weights, premium HID light pkg., Durabilt 3500 30" tracks, 510 hrs., ext. warranty to 7/17/15, S/N901406

2012 JD 9510RT, deluxe cab, buddy seat, powershift, 4 hyd., integrated auto steer, wide swing drawbar, HID lights, front suitcase weights, 36" tracks, 502 hrs., S/N1RW9510RTCP901672

2013 JD 8360RT, IVT, premium cab, JDLink, 4 hyd., 60 gpm pump, 3 pt., quick hitch, PTO, HID lights, (22) front suitcase weights, Durabilt 3500 16" tracks, 386 hrs., warranty until 11/22/14, ext. warranty until 11/22/15, S/N909033

2012 JD 8335RT, IVT, premium cab, JDLink, 5 hyd., 60 gpm pump, 3 pt., quick hitch, PTO, HID lights, cold weather pkg., (22) front suitcase weights, Durabilt 5500 16" tracks, wide stance 72"-120", 607 hrs., warranty until 9/7/14, S/N907974

2010 Caterpillar Challenger MT865C, powershift, 5 hyd., wide swing drawbar, Reichhardt integrated auto steer, radar, front suitcase weights, idler weights, 30" tracks, 1,798 hrs., S/NAGCC865JNVKG1048

1994 Caterpillar 75C, 10 spd. powershift, 4 hyd., 1000 PTO, Cat 4 wide swing drawbar, 6-way 12' dozer w/side ext., silage end plates, Durabilt 3500 30" tracks at 50%, S/N4KK00611

1990 Caterpillar 65, 4 hyd., air drill return, 24" tracks at approx. 20%, 6,746 hrs., never pulled hard

4WD TRACTORS

2013 JD 9410R, premium cab, JDLink, 18 spd. powershift, 5 hyd., high flow pump, 1000 PTO, diff lock, HID lights, 480/80R50 press steel duals, 845 hrs., warranty until 2/9/15, ext. warranty to 2/9/16, S/N006962

2011 JD 9630,  deluxe cab, active seat, buddy seat, powershift, 5 hyd., integrated auto steer, diff lock, Cat 5 heavy duty drawbar, HID lights, electric mirrors, weight pkg. to include 3,000 lb. front axle & 6,030 lb. rear axle, 800/70R38 metric duals, 781 hrs., PowerGard engine and power train until Oct. 4, 2014, S/N1RW9630PHBP025056

2011 Case-IH Steiger 385, deluxe cab, 16 spd. powershift, 5 hyd., high cap. pump, large return flow, 1000 PTO, full auto steer, Pro 700 display, diff lock, electric mirrors, HID lights, extremity lights & beacon, 3,000 lb. rear axle weights, 520R46 triples, 968 hrs., S/NZBF1213243

2002 NH TJ375, 24 spd., 5 hyd., high iron & positive coolant, 710/70R42 metric duals, shows 4,971 hrs., S/NRVS001180

1998 NH TV140 bi-directional, hydro, front & rear PTO, front & rear hyd., loader w/grapple, 16.9-38 tires, shows 3,725 hrs. but hrs. & S/N unknown

1998 Ford NH TV140, hydro, 3 hyd., 3 pt., front weights, NH 7614 self-leveling loader, 4-tine grapple, 18.4-38 single tires, shows 2,615 hrs., S/ND203289

1997 JD 9300, deluxe seat, 24 spd., 4 hyd., GreenStar ready, diff lock, standard light pkg., 710/70R38 duals, shows 4,633 hrs., S/NRW9300H001772

1997 JD 9200, 24 spd., 4 hyd., diff lock, 20.8-42 press steel duals, shows 8,418 hrs., S/NRW9200H001642

1996 Case-IH 9370, 12 spd. powershift, 4 hyd., 20.8-38 factory triples, one season on Michelin duals, 95%, 4,652 actual hrs.

1994 Ford NH Versatile 9680,  855 Cummins, 350 hp., 12 spd., 4 hyd., full rear weight pkg., Trelleborg 700/65R38 tires, shows 5,978 hrs., center pins replace in 2011, S/N0102924

1992 JD 8760, 24 spd., 3 hyd., diff lock, 20.8-38 press steel duals, shows 6,873 hrs., S/NRW8760H004742

1988 JD 8650, quad range, 3 hyd., 20.8-38 triples at 70%, shows 9,699 hrs., New A/C compressor & starter, S/NH009012

JD 8640, PTO, 20.8-38 tires w/hub duals, tach shows 3,820 hrs., engine replaced in 1994

1982 Versatile 875, 12 spd., 4 hyd., 20.8-38 tires, S/N150640

Versatile 800, converted to hydro, used for pull tractor

1979 Case 4690, 12 spd. powershift, 3 hyd., rear hyd. pump needs repair, 18.4-38 duals, shows 6,831 hrs., S/N881728

1976 Case 2470, powershift, 4 hyd., 3 pt., no PTO, 18.4-34 duals, inside tires at 90%, shows 6,358 hrs.

MFWD TRACTORS

2011 JD 8360R, MFWD, IVT, ILS, premium cab, JDLink, 5 hyd., 60 gpm pump, 3 pt., quick hitch, PTO, HID lights, cold weather pkg., intel power management, (22) front suitcase weights, (2) 1,400 lb. inside rear weights, outside pair rear 165 lb. & (2) pair outside 450 lb. weights, 380/90R54 press steel duals, 380/80R38 front duals, 696 hrs., S/N046384

2012 JD 8335R, MFWD, IVT, ILS, premium cab, JDLink, 5 hyd., 60 gpm pump, 3 pt., quick hitch, PTO, HID lights, (22) front suitcase weights, cold weather pkg., 380/90R54 press steel duals, 320/80R42 front duals, 811 hrs., ext. warranty until 10/01/16, S/N062677

2013 JD 8310R, MFWD, IVT, ILS, deluxe cab, integrated auto steer, 5 hyd., power beyond, 3 pt., quick hitch, 1000 PTO, diff lock, radar, HID lights, front fenders, 320/80R42 front duals, 380/90R54 press steel duals, 684 hrs., S/N1RW8310PDD069305

2011 JD 8310R, MFWD, deluxe cab, IVT, ILS, 4 hyd., 60 gpm pump, 3 pt., quick hitch, 1000 PTO, diff lock, integrated auto steer, HID lights, front suitcase weights, 380/90R54 press steel duals, 380/80R38 front duals, shows 1,276 hrs., S/N1RW8310RHBD047165

2012 JD 8285R, MFWD, IVT, ILS, premium cab, JDLink, 5 hyd., 60 gpm pump, 3 pt., quick hitch, PTO, HID lights, (22) front suitcase weights, cold weather pkg., 380/90R54 press steel duals, 320/90R42 front duals, 479 hrs., warranty until 9/21/14, S/N063200

2011 JD 8285R, MFWD, powershift, deluxe cab, JDLink, 4 hyd., 60 gpm pump, 3 pt., quick hitch, PTO, HID lights, (16) front suitcase weights, (2) pair inside 450 lb. weights, 480/80R46 press steel duals, 420/90R30 front tires, 1,600 hrs., ext. warranty until 8/9/16, S/N044590

2013 JD 8235R, MFWD, IVT, ILS, premium cab, JDLink, 5 hyd., 60 gpm pump, 3 pt., quick hitch, PTO, HID lights, (22) front suitcase weights, cold weather pkg., 380/90R54 press steel duals, 320/80R42 front duals, 777 hrs., warranty until 9/20/14, S/N062540

2014 JD 7230R, MFWD, premium cab, JDLink, auto quad 20/20, 4 hyd., 43 gpm pump, 3 pt., quick hitch, PTO, HID lights, front weight support, cold weather pkg., (1) pair 450 lb. rear weights, JD 480 self-leveling loader, 480/80R46 press steel duals, 420/90R30 front tires, 84 hrs., warranty until 11/8/15, S/N015039

2014 JD 7215R, MFWD, premium cab, JDLink, auto quad 20/20, 4 hyd., 43 gpm pump, 3 pt., quick hitch, PTO, HID lights, front weight support, cold weather pkg., (1) pair 450 lb. rear weights, JD 480 self-leveling loader, 480/80R46 press steel duals, 420/90R30 front tires, 48 hrs., warranty until 11/8/15, S/N015075

2014 JD 7200R,  MFWD, premium cab, JDLink, auto quad 20/20, 4 hyd., 43 gpm pump, 3 pt., quick hitch, PTO, foot speed control, HID light pkg., front weight support, (1) inside pair 450 lb. rear weights, JD 480 self-leveling loader, 480R46 press steel duals, 420/90R30 front tires, 112 hrs., warranty until 11/8/15, S/N015037

2013 JD 7140R, MFWD, premium cab, auto quad 20/20 40K, 4 hyd., 3 pt., quick hitch, PTO, HID lights, cold weather pkg., pair inside 450 lb. weights, JD H360 self-leveling loader, 480/80R42 rear tires, 380/85R30 front tires, 183 hrs., warranty until 7/3/15, S/N008722

2014 JD 6170R, MFWD, premium cab, JDLink, auto quad 20/20, 4 hyd., 3 pt., quick hitch, 540/1000 PTO, cold weather fuel heating system, 3-function mid-mount ICV, premium light pkg., 200 amp alternator, (2) inside 450 lb. rear weights, JD H360 self-leveling loader, 480/80R46 rear tires, 420/90R30 front tires, 93 hrs., warranty until 10/26/15, S/N010138

2013 JD 6150R, MFWD, premium cab, JDLink, auto quad 20/20 40K, 4 hyd., 3 pt., quick hitch, PTO, HID lights, cold weather pkg., pair inside 450 lb. weights, JD H360 self-leveling loader, 480/80R42 rear tires, 380/85R30 front tires, 191 hrs., warranty until 7/3/15, S/N008660

2004 JD 8320, MFWD, deluxe cab, buddy seat, powershift, 3 hyd., 32.5 gpm pump, power beyond, 3 pt., quick tach, 1000 PTO, GreenStar ready, 450 lb. inside wheel weights, (10) suitcase weights, 380/90R46 rear press steel duals, 380/85R30 front tires, 3,164 hrs., S/NRW8320P021675

1999 JD 8200, MFWD, deluxe cab, buddy seat, 4 hyd., 3 pt., quick hitch, 540/1000 PTO, integrated auto steer, HID lights, (8) suitcase weights, 14.9-46 press steel duals, 7,400 hrs., S/NRW8200T026855

2002 JD 8120, MFWD, deluxe cab, active seat, powershift, 4 hyd., 3 pt., quick hitch, integrated auto steer, front suitcase weights, 380/90R50 press steel duals, 385/85R34 front tires, shows 5,937 hrs., S/NRW8120P003812

1996 JD 8100, MFWD, powershift, 3 hyd., 3 pt., quick hitch, 540/1000 PTO, GreenStar ready with ATU steering wheel, standard light pkg., 18.4-42 press steel duals, 380/85R30 front tires, shows 10,460 hrs., S/NRW8100P01288

1994 JD 7800, MFWD, deluxe cab, 16 spd. power quad, 3 hyd., 3 pt., quick hitch, 540/1000 PTO, front weights, 18.4-42 press steel duals, 14.9-30 front tires, shows 11,081 hrs., S/NRW7800H009949

2004 JD 6420, MFWD, 16 spd. quad range, 2 hyd., 3 pt., 540/1000 PTO, A/C, front weights, 12.4-28 front tires, 15.5-38 rear tires

2012 JD 6210,  MFWD, deluxe cab, IVT, integrated auto steer, 3 hyd., 3 pt., quick hitch, 540E, 1000, & 1000E PTO's, diff lock, front HID lights, 320/85R38 front tires, 380/90R50 press steel duals, 350 hrs., S/N1RW6210RECD002708

2013 JD 4720, MFWD, deluxe cab, radio, HST 25 spd., 1  hyd., 3 pt., PTO, dual mid-hyd., 16.9-24 rear tires, 10:00-16 front tires, warranty until 7/11/16, S/N947035

2011 Case-IH Steiger Puma 165C, MFWD, air cab seat, passenger seat, CVT trans., 4 hyd., 3 pt., PTO, 380/85R30 front tires, 480/80R42 rear duals, 460 hrs., S/NZA13H10135

2006 Case-IH MX230, MFWD, 5 hyd., 3 pt., 3 PTOs, climate control, cloth interior, 380/90R50 press steel duals, 3,500 hrs., S/NJAZ133266

2006 Agco GT45, MFWD, CAH, 46 hp., 16F/8R, 2 hyd., 3 pt., quick hitch, radio, 11.2R20 front tires, 14.9-28 rear tires, 1,167 hrs., S/NGT454WDATN060095

2012 JD 1026R, MFWD, 25 hp. diesel, hydro, New Curtis cab w/lights, wiper & heat, mid-hyd., front & rear PTO, New drive-over 60" mower, front-mount 54" quick hitch snowblower, hyd. controls, 26R12:00-12 turf tires

2008 Kubota M135X, MFWD, CAH, 8 spd. powershift w/Hi-Low, LH reverser, 2  hyd., 3 pt., quick hitch, Kubota LA2253 quick tach loader, 7' quick tach bucket, joystick, 1,840 hrs., loader S/NA0160, tractor S/N50133

2003 NH TG285, MFWD, powershift, 5 hyd., 3 pt., quick hitch, 1000 PTO, Super Steer, Trimble EZ Steer, no display, radar, diff lock, front suitcase weights, (2) 1,000 lb. rear weights, 380/90R50 press steel duals, 380/90R38 front tires, shows 5,393 hrs., S/NJAW127086

Ford NH 455D landscape tractor, MFWD, EROPS, diesel, aux. front hyd., rear hyd., 3 pt., 5,058 hrs., New paint

Gannon box, 6-way rear, w/scarifiers, for Ford 455D

Quick attach plate bucket w/rippers, for Ford 455D

2WD TRACTORS

1981 JD 4440, quad range, 2 hyd., 3 pt., 540/1000 PTO, JD 148' loader, 8' bucket, 18.4-38 duals, shows 11,121 hrs., single owner

1977 JD 4430, quad range, 2 hyd., 3 pt., PTO, 18.4-38 tires, 9,629 hrs.

1976 JD 4430, quad range, 3 hyd., 3 pt., quick hitch, 540/1000 PTO, diff lock, 14.9-46 singles, shows 13,540 hrs., S/N048466

JD 4430, CAH, quad range, 3 hyd., 3 pt., JD 158 loader

1965 JD 4020, diesel, 8 spd., 2 hyd., PTO, 18.4-34 rear tires, shows 6,051 hrs., cracked block, S/NT213R102190R

JD 2755, CAH, diesel, 8 spd. syncro, 3 hyd., 3 pt., diff lock, 16.9-28 rear tires, 4,180 hrs., S/N02755G744346

1981 IHC 1586, 3 hyd., 540/1000 PTO, diff lock, front suitcase weights, 18.4-38 press steel duals, recent cab kit, paint & A/C

1974 AC 7050, 3 hyd., 3 pt., 1000 PTO, 16.9-38 duals, shows 4,521 hrs.

AC 190, wide front, open station, diesel, hyd., 3 pt., PTO

Farmall 826, cab, 2 hyd., 540/1000 PTO, 18.4-38 hub duals

IHC 706, wide front, open station, 3 pt., 540/1000 PTO, 14.9-38 duals, 6,800 hrs., some engine work done

IHC 706, no cab, wide front, diesel, 2 hyd., Farmhand hyd. loader, 7' bucket

IHC 184 Lowboy, 60" deck, 3 pt., S/N2000115U044262

COMBINES

2012 JD S680, STS, Contour-Master, premium cab, deluxe controls, PRWD, Pro Drive, integrated auto steer, Y&M, 5 spd. feeder house, high cap. 26' unloading auger, grain hopper ext., fine cut chopper, round bar concaves, 654 sep. hrs., 972 engine hrs., extended warranty until 9/2/15 or 1,000 hrs., S/N1H0S680SCC0747344

2012 JD S680, STS, premium cab, Contour-Master, Pro drive, PRWD, JDLink, integrated auto steer, HID lights, side hill performance pkg., power cast tailboard, high cap. unloading auger, fine cut chopper, straddle duals, 750/65R26 rear tires, 669 sep. hrs., 1,054 engine hrs., ext. warranty to 9/25/15, S/N745615

2009 JD 9870, STS, Contour-Master, premium cab, deluxe controls, PRWD, Pro Drive, integrated auto steer, Y&M, 5 spd. feeder house, high cap. lift cyl., high cap. unloading auger, fine cut chopper, HID lights, 710R38 metric duals, 26L-26 rear tires, 1,027 sep. hrs., 1,456 engine hrs., S/N1H09870S730672

2006 JD 9860, STS, Contour-Master, PRWD, deluxe controls, Bullet rotor, Y&M, high cap. unloading, HID lights, 520/85R42 straddle duals, 1,811 sep. hrs., 3,008 engine hrs., S/NH09860S715941

2006 JD 9860, STS, Contour-Master, Bullet rotor, deluxe controls, Y&M, HID lights, high cap. unloading auger, fine cut chopper, heavy duty reverser, (2) sets concaves, 800/70R38 single tires, 28L-26 rear tires, 2,152 sep. hrs., 3,061 engine hrs., S/NH09860S716158

2010 JD 9770, STS, Contour-Master, Pro drive, PRWD, integrated auto steer, Y&M, high cap. 22-1/2' unloading auger, fine cut chopper, power tailboard, small wire concaves, Touchset controls, HID light pkg., 800R32 singles, 28L-26 rear tires, 1,668 sep. hrs., 2,304 engine hrs., S/N1H09770STA0738499

2009 JD 9770, STS, Contour-Master, premium cab, deluxe controls, PRWD, integrated auto steer, Y&M, high cap. unloading auger, fine cut chopper, hopper ext., HID lights, 20.8-42 straddle duals, 28L-26 rears, 1,165 sep. hrs., 1,647 engine hrs., S/NH09770S730885

2009 JD 9770, STS, Contour-Master, deluxe controls, PRWD, integrated auto steer, Y&M, 5 spd. feeder house, high cap. 26' unloading auger, power tailboard, fine cut chopper, HID lights, 20.8-42 straddle duals, 18.4-26 rear tires, 1,384 sep. hrs., 1,797 engine hrs., S/NH09770731916

2001 JD 9750, STS, deluxe controls, JD auto steer, Y&M, long auger, MAV straw chopper, 18.4-38 straddle duals, 18.4-26 rear tires, 2,230 sep. hrs., 2,966 engine hrs., S/N691165

2001 JD 9750, STS, deluxe controls, Y&M, long auger, fine cut chopper, hopper ext., rock trap, Trelleborg 900/60R32 singles at 65%, Goodyear 18.4-26 rear tires at 50%, 2,812 sep. hrs., 4,044 engine hrs., S/N691288

2003 JD 9650, Walker, deluxe controls, PRWD, 20' unloading auger, GreenStar Y&M, Field Office, 865R32 single tires, 18.4-26 rear tires, 2,665 sep. hrs., 3,673 engine hrs., S/N700393

2002 JD 9650, STS, fore/aft, GreenStar ready, long auger, hopper ext., 18.4-42 straddle duals, 2,204 sep. hrs., 2,888 engine hrs., S/NH09650S696898

1998 JD 9610, Contour-Master, DHH, DAS, fore/aft, chaff spreader, Y&M, long auger, 18.4-38 straddle duals, 2,820 sep. hrs., 3,960 engine hrs., S/NH09610X678418

1997 JD 9600, DHH, DAS, fore/aft, factory PRWD, Data Center, long auger, chaff spreader, Crary Big Top, 10 Series updates, set up for 600 Series heads, 68/50R32 flotation tires, 18.4-30 rear tires, 3,310 sep. hrs., 4,626 engine hrs., S/NH09600X673281

1997 JD 9600, DHH, DAS, fore/aft, GreenStar Y&M, no display, long auger, chaff spreader, TSR fine cut chopper, 18.4-38 straddle duals, 14.9-24 rear tires, 3,507 sep. hrs., 4,970 engine hrs., S/NH09600X672022

1991 JD 9600, Yield monitor ready, chaff spreader, single tires, 3,807 sep. hrs, 5,006 engine hrs., single owner, S/N640801

1990 JD 9600, DHH, DAS, fore/aft, long auger, twin chaff spreader, DMC Calc-U-Dri, 10 Series updates, set up for 600 Series heads, 30.5-32 singles, 14.9-24 rear tires, 3,194 sep. hrs., 4,799 engine hrs., S/NH9600X635374

1990 JD 9600, DHH, DAS, fore/aft, long auger, twin chaff spreader, 10 Series updates, set up for 600 Series heads, 30.5-32 singles, 14.9-24 rear tires, 4,738 sep. hrs., 6,778 engine hrs., S/NH09600X636564

1998 JD 9510, deluxe controls, Ag Leader Yield w/Nav II and Ag Leader Insight, long auger, chaff spreader, converted to 600 Series single pt., 24.5-32 singles, 18.4-26 rear tires, 2,264 sep. hrs., 3,166 engine hrs., JD Harvester Works combine, many 9550 controls, parts, shielding on combine for testing, S/N shows 9510, all working operations of combine JD 9550, S/N676831

1992 JD 9600, DHH, DAS, fore/aft, long auger, 30.5-32 singles, 14.9-24 rear tires, 3,384 sep. hrs., 4,477 engine hrs., S/NH09600X646314

1991 JD 9600, PRWD, AHH, rock trap, TSR fine cut chopper, Vittetoe chaff spreader, 30.5-32 singles, 18.4-26 rear tires, 2,424 sep. hrs., 3,513 engine hrs., S/NH09600X641049

1981 JD 8820, air foil sieve, 30.5-32 singles, 6,051 engine hrs.

1986 JD 7720, diesel, DAM, Ag Leader grain monitor, 24.5-32 single tires at 60%, 3,680 hrs., second owner, S/N600873

1981 JD 7720, A/C, DAM, chaff spreader, good tires, cyl. bars, concaves & some belts New 100 hrs. ago, S/N461788

1979 JD 7720, 2 spd. cyl., bean slow down kit, reverser, rock trap, chaff spreader

1975 JD 7700, diesel, posi torque drive, 8,230 hrs., S/N166029

JD 7700, turbo diesel, posi torque, 4,825 hrs.

1997 Case-IH 2188, axial flow, AFX rotor, deluxe controls, rock trap, chopper, Maurer hopper ext., long auger, power reverser, (2) sets concaves, 30.5-32 singles, 14.9-24 rear tires, 2,774 sep. hrs., 3,464 engine hrs., S/NJJC0195737

Case-IH 1680, straw chopper, 30.5-32 front tires, 14.9-24 rear tires, 4,454 hrs. S/NJJC0048931X

1994 Gleaner R72, 330 hp. Deutz, hydro, deluxe controls, grain loss monitor, 30.5-32 inside tires, 18.4-38 duals, 16.9-24 rear tires, shows 2,519 sep. hrs., 3,700 engine hrs., S/NR7240922

1993 Gleaner R62, Deutz air-cooled engine, 325 hp., heavy feeder drives, force feeder chains, lowered feeder house floor, newer cyl. bars, 30.5-32 front tires, 16.9-24 rear tires, 3,484 sep. hrs., 4,802 engine hrs., 2 yrs. on elevator chains

AC Gleaner L2, 6 cyl., gear drive, Windrow Plus, 23.1-30 single tires, with LM 13' pickup head w/Sund pickup, S/NLW19026

PICKUP HEADS

2010 JD 615P pickup head, 15-belt, single pt. hookup, wind guard, S/N1H00615PCA0735654

JD 914 pickup head, JD 7-belt pickup, S/NH00914W675213

JD 214 pickup head, 7-belt pickup

JD 212 pickup head, 5-belt pickup, S/N541072

JD 212 pickup head, 6-belt pickup, S/N372599H

JD 212 pickup head, 6-belt pickup, S/N372354H

JD 212 pickup head, Melroe hyd. drive pickup

JD pickup head, 5-belt pickup

JD 100 pickup head, JD 5-belt pickup

JD 100 pickup head, Melroe 5-belt pickup

Westward 914 pickup with 397 Westward 8-belt pickup

Case-IH 1015 pickup head

Case-IH 1015 pickup head, Case pickup

IHC 810 pickup head, Case-IH 5-belt pickup, S/N33427

DRAPER HEADS

2011 MacDon FD70 flex draper head, 45', dual sickle drive, fore/aft, finger reel, sickle teeth, New transport, New Case-IH adapter, only 1,300 acres on teeth

2010 MacDon D60 draper head, 35', steel drum fingers, hyd. fore/aft, DAS, finger reel, poly end dividers & skid plates, 60/70 Series hookups, transport, S/N169548

2009 MacDon flex draper, 40', hyd. fore/aft, double knife drive, DAS, poly end dividers, poly bottom, JD single pt. hookup, S/N193854

FLEX HEADS

2009 JD 635 flex head, 35', fore/aft, Crary air reel, S/N732506

2009 JD 635 flex head, fore/aft, poly, stubble lights, 70 Series hookups

2008 JD 635 flex head, 35', fore/aft, S/N725364

2011 JD 635 flex head, fore/aft, poly, stubble lights, 70 Series hookups, S/NCACC755125

2010 JD 635 flex head, fore/aft, poly, stubble lights, 70 Series hookups, S/N1H00635FKA0737436

2009 JD 635 flex head, fore/aft, poly, stubble lights, 70 Series hookups, S/NH00635F731733

2009 JD 635 flex head, fore/aft, stubble lights, poly skids, single pt. hookup, S/N731706

2009 JD 635 flex head, 35', fore/aft, DAS, poly, composite full finger, high dam, header height sensor, single pt. hookup, S/NH00635F732329

2009 JD 635 flex head, fore/aft, low dam, stubble lights, poly

2009 JD 635F flex head, fore/aft, poly, 70 Series hookup, 600 acres, S/N730994

2009 JD 635F flex head, fore/aft, poly, 70 Series drives, S/N731243

2008 JD 635 flex head, fore/aft, stubble lights, poly skids, single pt. hookup, S/N726582

2008 JD 635 flex head, fore/aft, stubble lights, poly skids, single pt. hookup, S/N725766

2008 JD 635 flex head, fore/aft, low dam, stubble lights, poly

2007 JD 635 flex head, 35', fore/aft, poly, stubble lights, Crary wind bar, poly skids, S/N721141

2007 JD 635 flex head, 35', fore/aft, low dam, DAS, composite full finger, poly, single pt. hookup for 60/70 Series, S/NH00635F721203

2005 JD 635 flex head, fore/aft, poly, stubble lights, 70 Series hookups, S/NH00635F711141

2005 JD 635 flex head, fore/aft, low dam, stubble lights, poly, Crary CWS wind bar, S/N711863

2004 JD 635 flex head, fore/aft, poly, 60 Series hookup, S/N706338

2008 JD 630 flex head, fore/aft, stubble lights, low dam, poly, 00 Series to 70 Series hookup, composite fingers, wedge kit, S/NH00630F725183

2007 JD 630 flex head, fore/aft, poly, stubble lights, AWS air bar, 50 & 70 Series hookups, S/N721310

2005 JD 630 flex head, 30', fore/aft, poly, low dam, stubble lights, spare sickle, S/NH00630F712273

2005 JD 630 flex head, fore/aft, stubble lights, high dam, poly, 00 Series to 70 Series hookup, wedge kits, composite fingers, S/NH00630F711084

2005 JD 630 flex head, 30’, poly, fore/aft, 00/10 Series hookups

2004 JD 630 flex head, 30', fore/aft, high dam, DAS, composite full finger, poly, multi-point hookup for 50 Series, S/NH00630F707732

2004 JD 630 flex head, fore/aft, stubble lights, low dam, poly, 00 to 50 Series hookups, wedge kit, New sickle, S/NH00630F706379

2004 JD 630 flex head, 30', full composite fingers, header height sensors, splined backshaft, adj. Crary air bar, multi point hookup

2002 JD 930, Contour-Master, AHH, fore/aft, 50 Series hookup, S/NH00930F697499

2002 JD 930 flex head, fore/aft, poly bottom, Crary air reel, stubble lights, 50 Series hookup, S/N697280

2001 JD 930 flex head, fore/aft, poly, full finger auger, stubble lights, 50 Series hookups, S/N692883

1998 JD 930 flex head, 30', S/N671651

1997 JD 930 flex head, fore/aft, poly bottom, Crary air reel, header lights, S/N671354

JD 930 flex head, fore/aft, DAM, controller for Contour-Master, poly, 1,200 acres on cutting parts

JD 930 flex head, header height, fore/aft, Crary air reel, S/NH00930F672330

JD 930 flex head, 30', No fore/aft, S/NH00930F692033

JD 930 flex head, almost new poly, S/NH00930F656725

JD 930 flex head, 30', fore/aft, full finger, poly bottom, S/NH00930F691509

JD 930 flex head, fore/aft, finger reel, full finger auger, Schumacher drive

JD 930 flex head, full finger, fore/aft, finger reel, S/NH00930F6915192002

JD 925 flex head, fore/aft, poly, full finger auger, 00 or 50 Series hookups, S/NH000925F696679

2001 JD 925 flex head, fore/aft, poly, full finger drum, 50 Series hookup, S/NH00925F696001

1990 JD 925 flex head, 25', poly, finger reel, S/NH00925F635687

JD 925 flex head, fore/aft, poly, finger reel, 50 Series hookup

1992 JD 925 flex head, fore/aft, steel snouts, stubble lights, finger reel, S/N656094

1999 JD 920 flex head, poly, SS decking, stubble lights, S/NH00920F681158

2000 NH 73C flex head, fore/aft, lateral tilt, 3" cut, Crary air reel, S/N663812

2000 Case-IH 1020 flex head, 25', poly skids, finger reel, S/NJJC0316617

1997 Case-IH 1020 flex head, 30', poly, EasyCut sickle, set up for Field Tracker, S/NJJC0223603

1987 Case-IH 1020 flex head, 25', fore/aft, finger reel, 3" sickle, 2007 Crary air reel, S/N003064

Case-IH 1020 flex head, 30', Crary air reel

Case-IH 1020 flex head, 25', poly

Case-IH 1020 flex head, 30’, fore/aft, 3” cut

IHC 1020 flex head, 25', fore/aft, finger reel, poly

(2) MF 1859 flex heads, 20', UII aluminum reel

MF 1859 flex head, 20', standard reel

2008 Caterpillar F540 flex head, 40’, fore/aft, header height, EasyCut sickle, 2011 Crary AWS air bar system, Lexion hookups

CHOPPING CORN HEADS

2013 JD 618C chopping corn head, 18x22", knife rolls, stubble lights, hyd. deck plates, RowSense, outer gathering ext., S/N1H00618

2012 JD 618C chopping corn head, 18x22", knife rolls, hyd. deck plates, stubble lights, RowSense, outer gathering ext., S/N745348

2012 JD 612C chopping corn head, 12x22", hyd. deck plates, stubble lights, knife rolls, outer gathering ext., 70 Series hookup, S/N746049

2011 JD 612C chopping corn head, 12x20", knife rolls, hyd. deck plates, stubble lights, outer gathering ext., RowSense, 70 Series hookup, S/N1H0612CCJB0740397

2010 JD 612C chopping corn head, 12x30", knife rolls, hyd. deck plates, stubble lights, outer gathering ext., 50, 60 & 70 Series hookups, S/N1H0612CCLA0735608

2009 JD 612C chopping corn head, 12x22", knife rolls, stubble lights, hyd. deck plates, outer gathering ext., S/NH0612CC730354

2009 JD 612C chopping corn head, 12x22", knife rolls, hyd. deck plates, stubble lights, outer gathering ext., 70 Series hookup, S/N730107

2009 JD 612C chopping corn head, 12x30", hyd. deck plates, knife rolls, stubble lights, outer gathering ext., S/NH0612CC730223

2012 JD 608C chopping corn head, 8x30", knife rolls, stubble lights, hyd. deck plates, outer gathering ext., 70 Series hookup, S/N1H00608CKB0745201

2011 Capella chopping corn head, 18x22", hyd. deck plates, knife rolls, Contour-Master, auto header height, S/N8319

2008 Case-IH 2612 chopping corn head, 12x30", hyd. deck plates, Field Tracker, poly points, S/N686506006

2009 Drago chopping corn head, 12x22", knife rolls, auto header height, S/N25639

2008 Geringhoff RD chopping corn head, 6x30", hyd. deck plates, stalk stompers, Case-IH 2388 hookups, S/N90047630

2008 Geringhoff RD chopping corn head, 18x22", hyd. deck plates, Headsight, Lexion adapter

2005 Geringhoff RD chopping corn head, 8x30", Headsight w/(3) sensors, JD single pt. hookup, approx. 10-11,000 acres, S/N91485830/B

STANDARD CORN HEADS

2008 Case-IH 2208 corn head, 8x22", knife rolls, hyd. deck plates, cob savers, RowSense, stubble lights, S/NCBJ038503

2009 JD 612C corn head, 12x22", stubble lights, hyd. deck plates, knife rolls, S/NH0612CX730105

2004 JD 1293 corn head, Contour sensor, hyd. deck plates, single pt., S/NH01293X70564

2004 JD 1293 corn head, Contour sensor, hyd. deck plates, single pt., S/NH01293X70834

1998 JD 1291 corn head, 12x22", knife rolls, manual deck plates, 3 sensor Headsight control, center auger cover, outer gathering ext., poly points, stubble lights, New deck plates, multi-point hookup, 1 season on gathering chains  & sprockets, S/NH01291X680702

1997 JD 1291 corn head, 12x22", knife rolls, poly points, hyd. deck plates, outer gathering ext., 50 Series hookup, S/NH01291X670729

JD 1290 corn head, 12x20”, hyd. deck plates, poly snouts, cob savers, flex shaft, single pt. hookup

2008 JD 893 corn head, 8x30", knife rolls, hyd. deck plates, S/N721574

2004 JD Clark conv. corn head, 12x22"

2003 Clark corn head, 12x22", standard rolls, poly points, S/N0906021222

JD Clark conv. corn head, 10x22", GVL poly, oil drive, S/N625771

1820 corn head on Clark frame, 30', JD row units, poly snouts, full control, cutter height control, fits 9770-S680, newer Series hookup

JD corn head, 8x22", standard rolls, poly

JD corn head, 12x22", converted from 8x30", poly snouts, PTO splined couplers, 40 Series hookup

1996 JD 693 corn head, 6x30", standard rolls, S/N665749

JD corn head, 12x22”, GVL poly snouts

1978JD 444 corn head, 4x38”, high tin

Case-IH 983 corn head, converted to 1083, Headsight, hyd. deck plates, GVL poly snouts, poly bottom

IHC 883 corn head, 8x22", steel snouts

IHC corn head, 8x22", manual deck plates, standard rolls

1994 Agco Gleaner hugger corn head, 8x30", S/N83017277

MF 63 corn head, 6x30"

MF corn head, 8x22"

RIGID HEADS

(2) JD 925 rigid heads, bat reel, pro plates, S/N646226, S/N646240

JD 230 rigid head, 30', bat reel, S/N616871

JD 230 rigid head, 30', bat reel

(2) MF 1859 rigid heads, 20', bat reels

MF rigid head, 20

JD 230 rigid head, bat reel, S/N490375

ALL CROP, SUNFLOWER, & BEAN HEADS

JD 853A all crop head, 8x30"

JD 853A all crop head, 8x30"

JD 653 all crop head, converted to 8x22”

1992 JD 454A all crop head, 38" rows, 4x38”

JD 100 Series head, 22', SSR 12" sunflower pans & reel

JD 853 all crop head, 8x30"

JD 222 head with sunflower pans

JD 100 Series head, 20' w/Sund pickup, perforated floor

JD 924 pickup head, Sund pickups, bean roller, screen bottom

GRAIN CARTS & GRAVITY BOXES

Unverferth 8250 grain cart, corner auger, 30.5L-32 diamond tires, PTO w/hyd. drive, light kit, S/NB22-190-100

Brent 880 grain cart, 20" auger, roll tarp, 1000 PTO, 30.5-32 tires, S/NB21140116

Unverferth 5000 grain cart, corner auger, SRT II roll tarp, 24.5-32 tires

Unverferth 4500 grain cart, 450 bu., 1000 PTO, 20.8-38 tires

Brent 620 grain cart, 14" side auger, 1000 PTO, 24.5-32 tires, always stored inside

1998 J&M 525 grain cart, corner unload, 1000 PTO, roll tarp, 23.1-34 tires, S/N4849

1993 Killbros 1200 grain cart, 650 bu., tarp, modified for easy cleanout

Parker 310 gravity box, 24' ext., center divider, tarp, 13 ton running gear

PKH 400 grain cart, hyd., tarp

HEADER TRAILERS

(2) 2014 Stomper King tandem axle header trailers, 36', torsion axles, light pkg., New

Wemco tandem axle header trailer, 42', torsion axles, rear brakes, New

Wemco tandem axle header trailer, 38', rear brakes, New

(5) Wemco tandem axle header trailers, 36', New

(2) Wemco tandem axle header trailers, 32', rear brakes, New

Wemco header trailer, 30', 6-wheel, S/N80206282

Wemco header trailer, 36’, never used

2010 Horst header trailer, 30’

2009 Maurer tandem axle header trailer, 38’

DMC double pickup header trailer

Elmers single pole header trailer, 30'

(2) EZ Trail header trailers, 4-wheel

Hart single pole header trailer, 30'

Johnson single pole header trailer, 30'

Johnson header trailer, 30', 2-wheel, w/corn head brackets

Klugman header trailer, corn head brackets, 2 yrs. old

Klugman header trailer, 2-wheel

Matson single pole header trailer, 30'

Shop-built header trailer, 25', 2-wheel

SSR Pump header trailer

1993 V Trailer single pole header trailer, 25'

Elmers single pole header trailer, 30', with light pkg.

Single pole single axle header trailer

Header trailer, 30', 4-wheel

Single pole header trailer, 25'

(2) Header trailers, 35', New

(2) Header trailers, 30', New

VERTICAL TILLAGE

2013 Great Plains Turbo Max 3000TM, 30', 7-1/2" spacing, adj. front gang, rolling harrows, rolling baskets, (2) weight kits, 380/55R16.5 main tires, used on 500 acres, S/NGP-C2469H

2007 Great Plains TurboTill 4000TT, 40', rolling harrows, rolling baskets, 1,000 acres on New blades & bearings, S/N2399

FIELD CULTIVATORS

2013 JD 2210 field cultivator, 55-1/2’, 6" space, 7" JD knock-on sweeps, walking tandems across, single pt. depth, rear hitch, 4-bar harrow,  S/N1N02210XTC0746122

2010 JD 2210 field cultivator, tandems across, AccuDepth, 4-bar harrow

2003 JD 2200 field cultivator, 54', 12" space, 7" sweeps, full floating hitch, tandems across, AccuDepth, 3-bar harrow, S/NN02200X001196

2003 JD 2200 field cultivator, 64-1/2', full floating hitch, AccuDepth, walking tandems across, 7" sweeps, 3-bar harrow

1995 JD 1050 field cultivator, 54', tandems across, single pt. depth, 7" sweeps, 4-bar harrow, S/NX466759

1996 JD 985 field cultivator, 54', walking tandems across, single pt. depth, 7" sweeps, 6" space, rear hitch, 3-bar harrow, S/NN00985X000459

JD 985 field cultivator, 60', tandems across, single pt. depth, wing stabilizer wheels, 6" space, 3-bar harrow, S/NN00985X000390

JD 980 field cultivator, 41-1/2', single pt. depth, walking tandems, 3-bar harrow

JD 960 field cultivator, 40'

JD 960 field cultivator, 40', tandems across, single pt. depth, 3-bar harrow

JD 960 field cultivator, 44', Herman 3-bar harrow, one broken middle wing hinge

Morris L225 field cultivator, 25', Gandy 6212 applicator, 3-bar harrow

1999 Wil-Rich 3400 field cultivator, 44', 7" space, 7" sweeps, tandems across, 4-bar harrow, S/N341572

Wil-Rich field cultivator, 38’, tandems across, 3-bar harrow

S-tine cultivator, 7', 3 pt. w/shop-built harrow

RIPPERS, COULTER CHISELS, MULCH FINISHERS

2004 JD 2700 ripper, 18', 9 shank, 14.5L tires, S/N2700X001274

2001 JD 2700 disc ripper, 9 shank, hyd. disc levelers, walking tandems, single pt. depth, S/NN02700X000246

1995 JD 726 mulch finisher, 36/39', tandems, single pt. depth, 5-bar harrow, S/NN00726X000356

JD 712 disc chisel, 13 shank, New Summers harrow

JD 712 disc chisel, no discs

2009 JD 512 ripper, 22-1/2', 9 shank, wing gauge wheels, walking tandems across, single pt. depth control, 12.5L-15 tires

2011 Summers disc chisel, 28', single pt. depth, tandems across, 4-bar Summers 104 heavy duty harrow, less than 1,700 acres

1997 Sunflower 4410 disc ripper, 9 shank, front & rear disc gang, walking tandems, S/N4496902

Case-IH ET730 disc ripper, 9 shank, disc levelers, 12" sweep, S/NJFH0025364

2003 Case-IH 9300 Ecolotiger disc ripper, 9 shank, disc levelers, S/NJFH0017312

Case-IH 9300 disc ripper, 9 shank, lead shank, hyd. fold, disc levelers, light pkg., New 7" & 5" points

2003 Case-IH 730B ripper, 18', 9 shank, 14.5L tires, S/NJFH0012783

Case-IH 730B disc ripper, 9 shank, disc levelers, S/N1FH0007829

Case-IH 930 disc ripper, 9 shank, hyd. fold, disc levelers, S/NJFH0017320

DMI Ecolotiger, 9 shank, wing fold, disc levelers, S/NJFH0002495

Brillion ripper, 4 shank, spring reset, gauge wheels

Landoll Soilmaster, 13 shank, S-tine leveler

Summers Super Coulter, 40', tandems across, Summers 104 3-bar harrow, S/NJ0206

Summers coulter chisel, 36', full floating hitch, tandems across, Wil-Rich wave coulters, 4-bar harrow

IHC McCormick 21 subsoiler, single shank, 3 pt.

King Kutter single pt. ripper, 3 pt.

CHISEL PLOWS

2008 JD 2410 chisel plow, 33', TruDepth standards, tandems across, single pt. depth, 4-bar Summers harrow, 9/16" teeth

2004 JD 2410 chisel plow, 45', full floating hitch, 28" true position shanks, AccuDepth, 12" space, tandems across, 4-bar harrow, S/NN02410X000306

JD 1610 chisel plow, 15', ext. to 17', S/N01610X015070

JD 1600 chisel plow, 16', 3-bar harrow

JD 1600 chisel plow, 29', tandems across, no harrow

JD 737 chisel plow, 40', floating hitch, heavy duty 4-bar harrow, low acres

JD 680 chisel plow, 31', walking tandems, single pt. depth, Summers 3-bar harrow

2005 Wil-Rich Quad 4 chisel plow, 39', full floating hitch, tandems across, single pt. depth, 3-bar harrow, S/N456422

Wil-Rich 4400 chisel plow, 43', tandems across, Raven NH3 cold flow, 3-bar harrow

Wil-Rich 4400 chisel plow, 39', walking tandems around, 3-bar harrow

IHC 5500 chisel plow, 29’, 3-bar harrow

Flexi-Coil 820 chisel plow, 12" spacing, walking tandems, heavy 800 lb. shanks

IHC 55 chisel plow, 27', no harrow

IHC 55 chisel plow, 19’

Melroe Gysler chisel plow, 24', 3-bar harrow

Melroe Gysler chisel plow, 24', NH3 knives, John Blue applicator, 3-bar harrow

Oliver chisel plow, 20', 3-bar harrow

HARROWS

Brandt 7000 heavy harrow, 70', low acres

Gates mtd. heavy duty harrow, 50', 3-bar

2014 Unverferth rolling basket harrow, 60', expandable pole, light pkg.

JD 2410 harrow, 50'

JD mtd. harrow, 29', 2-bar

Lindsay harrow, 50'

McFarlane harrow, 60', 16-bar, walking tandems

Melroe harrow, 60'

Melroe hyd. harrow, 45'

Melroe harrow, pull-type, 3-bar, 4-section

Sunflower harrow, 19', 2-section, steel teeth

FIELD FINISHERS & SOIL CONDITIONERS

2012 Wil-Rich crumbler, 27', hyd. fold, adj. length pole

Summers rolling chopper, 53', 11L-15 duals on main frame, 7:60-15 singles on wing & outer wing, Summers 3-bar harrow, S/NK0293

Unverferth 1225 twin basket crumbler, 37', expandable pole, light pkg.

1997 Wil-Rich DCII disc cultivator, 34'

Elmers 6400 coil tine field finisher, 40', 4" sweep, full floating hitch, rear hitch, 4-bar harrow, S/N95476

Kongskilde soil finisher, 30', walking tandems all around

Melroe 420 multiweeder, 50'

Melroe multiweeder, 29', 3-bar

Melroe multiweeder, 35’

LAND ROLLER, DISCS, & OTHER TILLAGE EQUIPMENT

2013 land roller, 45', 36" drums, New

2008 Wishek 862NT disc, 38', 28" blades, 13" spacing, single pt. depth, 22.5 truck tires

1993 Ezee On 8300 heavy duty disc, 36', 12" space, 26" cone blades, hyd. wing fold, single pt. depth, S/N42184

Ezee On 2600 heavy duty disc, 26', 11" space, 24" cone blades, single fold, tandems across, S/NX490001

JD 650 tandem disc, 32’, hyd. fore/aft, 9" front blades, 11" rear blades, Summers harrow

Amco S15 tandem disc, 30’, 22” blades, tandems across, New shafts

Hutchmaster tandem disc, 28', wing-fold, New tires

MF 520 tandem disc, 18', spring-loaded wing fold

2013 Buhler tandem disc, 9', 3 pt., notched blades

IHC 490 disc

IHC 490 tandem disc, 33'

JD 360 offset disc, 14'

Disc, 10', 3 pt.

JD 1640 heavy duty disc, 16’

Flexi-Coil S-tine harrow packer, 48'

Brillion pull-type packer, 20'

IHC 800 plow, 10x18"

Ford plow, 2 bottom, 3 pt.

SELF-PROPELLED SPRAYERS

2009 JD 4930 self-propelled sprayer, 120' boom, 1,200 gal. SS tank, Load Command w/eductor, traction control, 2600 display, HID lights, Raven direct injection system, shows 2,630 hrs., S/NN04930X008212

2007 JD 4930 self-propelled sprayer, 120' boom, 1,200 gal. SS tank, 5-sensor BoomTrac, traction control, SS eductor, brown box display, high flow pump, auto air spring-leveling, fence row nozzles, HID lights, shows 2,440 hrs., S/NN04930X00245

2005 JD 4920 self-propelled sprayer, 120' boom, 1,200 gal. SS tank, traction control, SS eductor, brown box display, Raven direct injection system, shows 3,764 hrs., S/NN04920X004038

2009 JD 4830 self-propelled sprayer, 90' boom, 1,000 gal. SS tank, 5-sensor BoomTrac, traction control, 2600 display, hyd. tread adj., HID lights, shows 2,100 hrs., S/NN04830X003198

2008 Apache AS1010 sprayer, AM/FM, A/C, Cummins 6 spd., 100' auto fold boom, triple nozzle bodies, 1,000 gal. tank, Raven 4400 controller, Outback S3 with AutoMate & Xdrive GPS system, cone chemical inductor, extra light kit, 380/80R38 front tires, 380/90R46 rear tires, 1,455 hrs.

2001 Ag Chem Rogator 854 self-propelled sprayer, 100' boom, 20" space, 800 gal. SS tank, 3" fill, foam markers, tank rinse kit, Raven 661 controller, hyd. tread adj., air ride cab, chemical eductor, 380/90R46 tires, shows 4,996 hrs., tach does not work, small leak on hydro control valve, S/N850434901

1994 Ag Chem Rogator 664 self-propelled sprayer, 80' boom, hyd. tread adj., 800 gal. SS tank, 385/85R34 tires

2002 Loral 3000SS, 60' AirMax V system, Allison automatic, 8 ton SS tank, foam markers, Midtech 6500 controller, 66/43R25 rear tires, 48x25-20 front tires, 37,066 miles

NYB pickup sprayer, 60', 500 gal. tank, foam markers, Raven spray controller

Summers pickup sprayer, 350 gal. tank, 60', TeeJet single nozzles, Raven control, Honda 6X160 motor, S/N8622

Melroe 216 spra-coupe, cab, 50’ boom, water-cooled

Melroe 210 spra-coupe, 3-wheel, 50', 200 gal. tank

Melroe 103 spra-coupe, 58' booms, 130 gal. tank, electric centrifugal pump

ATV sprayer, 25 gal. w/boom

SELF-PROPELLED SPREADERS

2001 Ag Chem Terragator TG8103, Air Spread 70' boom, Terrashift, Falcon II controller, electric tarp, foam markers, no left/right boom shut-off, 66/43R25 tires, shows 4,408 engine hrs., S/N83076901

1998 Ag Chem Terragator TG8103, Air Spread 70' boom, JD engine, Terrashift, 8 ton tank, Raven 4600 controller, electric tarp, right/left shut-off, 60 gal. foamer, New drive coupler, 66/43R25 tires, shows 4,696 hrs., S/N83009598

1995 Ag Chem Terragator TG1803, Air Spread 67' boom, 3208 Cat, 18 spd., 8 ton tank, electric tarp, Dickey John controller, 66/43R25 tires, cracked rear axle frame mount, crack system mount brackets, shows 3,982 hrs., S/N1835435

SLEEPER SEMI TRACTORS

1993 Volvo WIA64T, sleeper, 855 Cummins, Rockwell 9 spd., 1,000,000+ miles

1997 Volvo, integrated sleeper, M11 Cummins, Fuller 9 spd., 24.5 tires, 737,000 miles

1992 Peterbilt 377, conventional, 3176 Cat, 9 spd., engine brake, air ride, 4:10 ration, 295/75R22.5 tires on steel rims, shows 953,000 miles

1985 White, integral sleeper, 3406 Cat, 9 spd., 22.5 tires, aluminum rims

NON-SLEEPER SEMI TRACTORS 

2007 Freightliner Columbia CL12064ST, day cab conventional, MBE4000, 450 hp., Eaton Fuller 10 spd., air ride seats & susp., air slide 5th, full gauges, 40,000 lb. rears, low pro 22.5 tires, outside rear aluminum rims, shows 992,200 miles

2006 Freightliner C12064ST Century 120 day cab, 14 liter 60 Series Detroit, 515 hp., 10 spd., engine brake, air ride, 12,000 lb. fronts, 40,000 lb. rears, 190" WB, aluminum front & steel rear rims, white

2006 Freightliner Columbia, day cab, 460 Mercedes, 10 spd., engine brake, air ride, fixed 5th plate, 3:70 ratio, 190" WB, 11-22.5 tires on steel rims, 312,612 actual miles

2006  Peterbilt  385,  day cab conventional, C13 Cat, 10 spd., engine brake, air ride seats & susp., air slide 5th, cruise, chrome bumper, single chrome stack, exterior SS visor, 185" WB, low pro 22.5 tires on aluminum rims, shows 999,000 miles

2006 Sterling AT9500, day cab, C12 Cat, 10 spd. autoshift, air ride, A/C, air ride, tilt, cruise, full screw, 40,000 lb. rears, dual aluminum fuel tanks, 22.5 tires, aluminum fronts

2005 Peterbilt 385, day cab conventional, C13 Cat, 10 spd., engine brake, air ride seats & susp., air slide 5th, cruise, chrome bumper, single chrome stack, exterior SS visor, 185" WB, low pro 22.5 tires on aluminum rims, shows 1,600,000 miles

2002 Volvo VNL, day cab conventional, ISM Cummins, 10 spd., air ride seat & susp., air slide 5th, full gauges, low pro 22.5 tires, outside rear aluminum discs, shows 141,719 miles

2001 Freightliner Century, day cab, 12.7 Detroit, 470 hp., 10 spd., engine brake, air ride, air slide, twin aluminum fuel tanks, 230" WB, 11-22.5 tires, aluminum rims, shows 686,112 miles

2000 IHC 9100I, day cab, N14 Cummins, 370 hp., 10 spd., cruise, 158" WB, 295/75R22.5 tires on steel discs, 692,626 miles

1999  Mack CH613, day cab, E7 Mack, 330 hp., 9 spd., engine brake, air ride, air slide, 11-24.5 tires on steel rims

1999 Peterbilt 379, day cab, 3176 Cat, 365 hp., Eaton Fuller 10 spd., engine brake, air ride, wet kit, lowboy ramps, PTO, 12,000 lb. fronts, 40,000 lb. rears, 200" WB, red

1999 Peterbilt 379 tandem axle, 3406 Cat, 450 hp., 15 spd., engine brake, low air susp., air slide 5th, 17'6" of frame-behind cab, cruise, tilt & telescoping, SS visor, dual stacks, headache rack, 264" WB, 12,000 lb. fronts, 40,000 lb. rears, 11-24.5 tires on aluminum wheels, 1,241,000 miles

1999 IHC 8100, day cab, M11 Cummins, 370 hp., 10 spd., air ride, 160” WB, 3:91 ratio, 295/75R25 tires, front aluminum & rear steel rims, shows 712,731 miles, New motor with paperwork

1998 IHC 9300 Eagle, day cab, M11 Cummins, 330 hp., Eaton Fuller 10 spd., engine brake, air ride, 12,000 lb. fronts, 40,000 lb. rears, 216"  WB, aluminum fronts, blue

1998 Mack CH613, day cab, E7 Mack, 350 hp., Eaton 9 spd., Mack susp. & rear ends, wet kit w/quick dump, Saf-T-Pull hitch, 1,031,000 miles

1997 Peterbilt 385, day cab, 3176 Cat, 365 hp., Eaton Fuller 10 spd., engine brake, air ride, wet kit, lowboy ramps, PTO, 12,000 lb. fronts, 40,000 lb. rears, 200" WB, white/green

1997 Volvo, day cab, M11 Cummins, 9 spd., air ride, 11-22.5 tires, shows 798,000 miles

1997 Kenworth T800, factory day cab, 12.7 Detroit, Super 10 spd., air ride, air slide 5^th, engine brake, 180” WB, 11-22.5 tires on steel rims

1994 Kenworth T600, day cab, 3406 Cat, 9 spd., air ride, fixed 5th plate, 3:91 ratio, 11-24.5 tires on steel

1993 Kenworth T800, day cab, 12.7 liter 60 Series Detroit, Fuller 10 spd., air ride cab, 8 bag rear susp., 4:10 ratio, 22.5 tires, aluminum front and outside rear rims, current DOT

1993 Volvo, day cab, N14 Cummins, 330 h p., wet kit, 11R24.5 tires

1992 Peterbilt 377, day cab, 3406B Cat, 13 spd., engine brake, air ride, air slide 5th, 24.5 tires, aluminum outside & steel inside rims

1991 Kenworth T800, day cab, 3176 Cat, 9 spd., air ride, fixed 5th plate, 24.5 tires on aluminum wheels, 1,114,620 miles

1990 Kenworth T400, day cab, L10 Cummins, 10 spd., air ride, 22.5 tires, high miles

1988 Kenworth T600, day cab, 3406B Cat, 13 spd., air ride, 24.5 tires, high miles

1978 IHC 2275, day cab, 290 Cummins, 9 spd., major OH 5,000 miles ago

HOPPER BOTTOM TRAILERS

2013 Maurer aluminum hopper bottom, 42', spring ride, roll tarp, sight glass, 285/75R24.5 tires

2013 Timpte Super Hopper, 40'x72", ag hopper, roll tarp, air ride, air scale, (2) rows lights, 11R24.5 tires, inside steel & outside aluminum rims

(2)2009 Wilson Commander hopper bottoms, 41', ag hopper, electric roll tarp, 11-24.5 tires on aluminum

2009 Wilson hopper bottom, 50'x96"x72" sides, 10' axle spread, air ride, roll tarp, brakes at 95%, 11-24.5 virgin tires at 95%, New outside aluminum rims

2005 Timpte Super Cubed hopper bottom, 43'x102"x78", aluminum sub frame, air ride, roll tarp, double row lights, 11-22.5 tall tires, aluminum rims

2005 Wilson hopper bottom, 50'x96", spread axle, air ride, roll tarp, front & rear catwalk, front & rear radius, double hopper, aluminum wheels

2003 Cornhusker Ultralite  hopper bottom, 43’x102”x84”, air ride, roll tarp, double row lights, 11-22.5 tires on aluminum rims

2002 Field Master hopper bottom, 42', ag hopper, roll tarp

2002 Jet hopper bottom, 42’

2001 Timpte tri-axle hopper bottom, 46'x102"x78", fixed tri-axle spring ride, commodity hoppers, roll tarp, double row lights, 11-24.5 tires on aluminum rims

2000 Wilson hopper bottom, 43'x102"x78", commodity hoppers, aluminum sub frame, roll tarp, double row lights, complete New brakes, low pro 295/75R24.5 tires on aluminum

1999 Wilson tri-axle hopper bottom, 50'x102"x86", air ride, electric roll tarp, 11-24.5 tires on aluminum

1999 Wilson hopper bottom, 41’x102”x78”, commodity hoppers, air ride, roll tarp, 11-24.5 tires on aluminum rims

1988 Timpte hopper bottom, 42', roll tarp, electric traps, tires 70%

1997 Jetco hopper bottom, 42'x72”, ag hopper, spring ride, 11-22.5 on steel rims

1996 Merritt hopper bottom, 43'x74" sides, ag hopper, roll tarp, spring ride, 11-24.5 tires on steel rims

1988 Timpte hopper bottom, 42'x66" sides, air ride, roll tarp, 2 spd. traps, 285/75R24.5 tires at 50%

1987 Timpte Super Hopper, 42', roll tarp, spring ride, 22.5 tires

1986 Wilson tandem axle hopper bottom, 42', roll tarp, spring ride, New tarp, trap doors, brakes, drums, & wheel bearings

Shop-built tandem axle hopper bottom, 40', spring ride, 11-24.5 tires on steel rims, for parts only, No Title

DROP DECK, RGN, IMPLEMENT & LOWBOY TRAILERS

1998 BT drop deck, 40', tandem steel frame, steel deck, spring ride, flip-up ramps w/beavertail, electric brakes, 235/85R16 duals

1997 Load King, 53', double drop, air ride, 22' well, aluminum slideouts, spring-loaded ramps, 11-22.5 tires on steel

2003 Transcraft drop deck, 50’x102”, air ride, wood floor, fixed spread, 255/70R22.5 tires

Fontaine 352 tandem axle drop deck, 42'x102", 29' wood deck, 2' beavertail, 6' flip-up ramps, spring ride, (4) D-rings on each side, 70k frame rating, 255/70R22.5 tires on steel rims

1965 American drop deck, 43', spring ride, ramps, 11-22.5 tires on steel, complete ground up rebuild in 2007, DOT

1998 Globe hyd. RGN tri-axle, air lift tag, 52' long, 24' well, 96" w/outriggers, non-ground bearing, brakes & tires at 50%

1999 Talbert TSDW  fixed neck spread tandem axle, 48'x102", 38' deck, 10' neck, air ride, steel composition, wood floor, 225-70R22.5 tires, steel wheels

1999 Talbert NR2008 detach trailer, 53’, 25’ well, air ride, New brakes, 22.5 tires at 60%, aluminum rims

1997 Trail Eze fixed tri-axle RGN, 50'x102", non-ground bearing, 50 ton, air ride, 14' neck, 22' open well, 13'6" back platform, outriggers, steel composition, wood floor, 22.5 tires, steel wheels

1990 Trail King lowboy, 45', hyd. beavertail, heavy duty winch, spring ride, brakes at 90%, 10:00-17.5 tires at 85%

2006 DCT tandem axle gooseneck flatbed trailer, 30', flip-up ramps w/beavertail, 24,000 lb. gvw

1998 Fontaine flatbed, 48’, spring ride, 11-24.5 tires on steel rims

1999 Econoline tilt deck equipment trailer, 30’ total deck, 24’ tilt, 6’ platform, 12 ton, beavertail, air brakes, tandem duals

1977 Dorsey tandem axle flatbed, 38', spring ride, 10:00-20 tires on steel rims

1979 Wisconsin tandem axle lowboy, 20'x8' main deck, 8' neck, 40 ton, spring ride, ramps, D-rings, 255/70R22.5 tires on aluminum disc wheels

2007 Delta gooseneck trailer, 27' bed, 5' dovetail, (2) 10,000 lb. axles, tandem duals

2005 May tri-axle trailer, 33'x8-1/2', folding ramps

1999 Towmaster pintle hitch trailer, 29’, 24-1/2’ bed, 8’6” wide, flip-up ramps, tandem duals

1980 tandem axle flatbed trailer w/ramps, electric brakes, pintle hitch, New deck

Donahue equipment trailer, 32'x10'

Donahue trailer, 28', square tubing

Donahue trailer, 28'x8', square tubing

1999 Schmidt SSR combine trailer, 33’, pintle hitch

END DUMP, BELLY DUMP, & LIVE BOTTOM TRAILERS

2003 MAC half round end dump, quarter frame, 36', air ride, 3rd axle air up/down, New roll tarp, New asphalt poly liner, 24.5 tires on aluminum rims

1997 East end dump, 25'x68" sides, spring ride, 11-24.5 tires on steel rims, set up to pull pup trailer

1985 East tandem axle end dump, 32'x96"x66" side tub, 33-1/2' steel frame, tarp, plastic, spare tire

1986 Fruehauf aluminum end dump, 34', steel frame, heavy poly liner, silage gate & grain gate, some cracks at hinge point

1981 Fruehauf aluminum end dump, 32'

1978 East tri-axle end dump, 30'

1978 Schein tri-axle end dump, 30’, air down/spring up 3^rd axle, roll tarp, combination gate, box liner, 11-22.5 tires on steel rims

2003 Sidump’r tri-axle gravel trailer, 46’, air ride, new style dump cyl., New brakes, 11-24.5 tires at 60%, steel rims

1999 Dakota gravel trailer, 50’, air dump, spring ride, New brakes, 11-24.5 tires on steel rims

1987 Allwell tandem axle gravel trailer, double hopper, 25 yd. cap., air tanks & valves replaced within last 2 yrs.

1984 Load King clam dump gravel trailer, 45’, spring ride, roll tarp, 11-22.5 tires on steel rims, fresh sandblast & paint

1999 Ranco belly dump gravel trailer, 42’, air dump, spring ride, 11-22.5 tires on steel

1964 Cook tri-axle belly dump, Super Single tires

1996 Trail King potato & grain live bottom trailer, good 36" chain, 11R24.5 tires

BOOM/CRANE TRUCKS

2002 Freightliner FL70 single axle, 3126 Cat, 175 hp., 5 spd., spring ride, Adkins bed, 2 ton 2 section 20' crane w/Kohler Command Pro 12.5, 11' body, air compressor, 6,000 lb. fronts, 11,000 lb. rears, 225/70R19.5 tires, steel wheels, 146,000 miles

1996 Freightliner FL80 single axle boom truck, Cummins, Allison automatic, platform height 49', 2,800 lb. platform bucket, Ranger 500M 16/46 BDD, 14' service body, inspection expired May 2014

TRI-AXLE, TANDEM & SINGLE AXLE BOXED TRUCKS

1997 Ford Aeromax tandem tri-axle, front steerable pusher, Loadliner 21' box

1994  Kenworth T800 tri-axle, air up/down steerable 3rd axle, 60 Series Detroit, 425 hp., 9 spd., New Loadline 22-1/2' box, hoist, 3 pc. endgate, roll tarp, 11-24.5 tires on aluminum rims, 579,000 actual miles

1983 IHC 9670 cabover tri-axle, rear lift tag, 855 Cummins, 350 hp., 9 spd., Knapheide 22-1/2' grain box, Headlift hoist, Shur-Lok roll tarp, 3 pc. endgate, beet gate w/closer, 385/65R22.5 front tires, low pro 22.5 rear tires

1983 IHC 9670 cabover tri-axle, rear lift tag, 855 Cummins, 350 hp., 9 spd., Knapheide 22-1/2' grain box, Headlift hoist, Shur-Lok roll tarp, 3 pc. endgate, beet gate w/closer, plumbed for drill fill, 385/65R22.5 front tires, 10:00-20 rear tires, low pro 22.5 tires on rear tag

1989 Simon Duplex 6x6, 4x4 w/tag axle, 6V92 Detroit, 350 hp., Allison HT750 direct automatic, Rockwell deep reduction, 1999 Reitan 25' aluminum box, Headlift hoist, roll tarp, combo gate, poly liner, 425/65R22.5 front axle, 11-24.5 rear tires, shows 63,000 miles

1980 IHC F2575 tandem axle w/pusher axle, Big Cam Cummins, 350 hp., 9 spd., power steering, spring ride, block heater, Loadline 20'x60"x96" box, roll tarp, Saf-T-Pull hitch, 12,000 lb. fronts, 40,000 lb. rears, rear dump, 236"" WB, 22.5 tires, steel wheels, 72,000 miles on OH

1980 IHC S1954 twin screw, DT466, Allison automatic, 18’ Cancade box, hoist, roll tarp, combination endgate, plumbed for drill fill, 11-22.5 front tires, 10:00-20 rear tires, New injection pump

1979 GMC General tri-axle w/rear lift, 6V92 Detroit, 13 spd., aluminum box, 11R22.5 tires on steel rims, poor roll tarp

1979 GMC Brigadier twin screw, 3rd axle single pusher, 6V92 Detroit, 9 spd., 21' Magnum box, roll tarp, sugarbeet endgate, 11-22.5 tires, engine OH'd 70,000 miles ago

1979 Chevrolet C60 twin screw, 427 gas, Allison automatic, 20' Loadline box, roll tarp, 3 pc. endgate, 10:00-20 tires, shows 89,160 miles

1978 Chevrolet twin screw, 427 gas, 5&2 spd., 18' box, roll tarp, 10:00-20 tires, shows 90,000 miles

1978 GMC twin screw, 427 gas, 5&2 spd., 18' box, roll tarp, 9:00-20 tires, shows 90,000 miles

1974 Chevrolet lift tag, 366, 5&2 spd., 19-1/2' Frontier box, roll tarp, 10:00-20 tires, used as water/fertilizer truck, includes (2) 1,200 gal. tanks

1974 Ford F750 tag tandem, 391 V8, 5&2 spd., power steering, 22' steel box, tall sides, hoist, roll tarp

1974 Dodge single axle, 2-1/2 ton, 318, 4&2 spd., 32,764 miles

1972 GMC Astro cabover twin screw, 8V71 Detroit diesel, 10 spd., 18' box, 10:00-20 tires

1969 Chevrolet tandem axle, 427 gas, 5&2 spd., hoist, roll tarp, 10:00-20 tires at 40%, steel rims, unknown miles

1968 Ford F700 tag tandem, V8, 5&2 spd., power steering, 19' steel box, hoist, roll tarp

1963 Chevrolet tag tandem, V8, 4&2 spd., 18' box, hoist, roll tarp, 9:00-20 tires

1959 Chevrolet 3/4 ton

1973 IHC Loadstar 1800 single axle, 345 V8, 4&2 spd., 16' Magnum box, hoist, 9:00-20 tires

CAB/CHASSIS, SERVICE & OTHER TRUCKS

2000  Volvo  VNL42300  tandem axle, ISM Cummins, 370 hp., Super 10 spd., air ride, cruise, double frame, 18' frame behind cab, 12,000 lb. fronts, 40,000 lb. rears, 232" WB, 22.5 low pro tires, steel wheels

2009 Freightliner single axle van truck, 230 hp., 6 spd. manual, 28' van, side door, rear roll-up door, 3:58 ratio, shows 657,000 miles

1998 Ford F800 single axle, 5.9 Cummins, manual, refrigerated van body, 10:00-20 tires

1991 Freightliner FLA086 cabover, 350 Cummins, 9 spd., air ride, 22.5 tires

1999 Ford F550 dually service truck, 7.3 diesel, automatic, 370,000 miles

1994 GMC Topkick service truck, 3116 Cat, 5 spd., crane, welder, air compressor

1978 Chevrolet C30, 1 ton service truck, 454, 4 spd., fuel & oil tanks, Lincoln 6000 watt welder/generator, 100,507 miles

2001 Freightliner FL80,  3126 Cat, 230 hp., 6 spd., 10' utility box, pintle hitch, 2-5/16" 5th wheel plate, 11R22.5 tires, 222,500 miles, jumps out of 3rd gear

1995 IHC, 2 ton, 466 diesel, 26’, beavertail, 213,000 miles

1970 GMC 5500, V6 gas, 5 spd., 8'x21' flatbed, used as water truck w/2,000 gal. water tank, Wisconsin pump, hose reel, 29,930 miles

PICKUPS

2007 Ford F150 XL, ext. cab, 8' box, 5.4 Triton gas, automatic, power steering, tilt wheel, A/C, AM/FM/CD, cruise, bucket seats w/flip-up center console, spray-on bedliner, LT265/70R17 tires, spare tire, shows 129,821 miles

2006 Ford F150 XL, ext. cab, 8' box, 5.4 Triton gas, automatic, power steering, tilt wheel, A/C, AM/FM, cruise, bucket seats w/flip-up center console, spray-on bedliner, LT245/70R17 tires

2006 Ford F250, ext. cab, 6.0 diesel, 2WD, side boxes & ladder rack, shows 142,000 miles

2003 Dodge Dakota SXT Club Cab, A/C, tilt, cruise, AM/FM radio, 150,000 miles

2003 Ford F350 Lariat, crew cab, long box, 6.0 liter diesel, automatic, 4WD, shows 150,000 miles

2002 Lincoln Blackwood, Special Edition, 4 door, V8, automatic, 2WD, loaded shows 162,000 miles

2001 Ford F350, crew cab dually chassis, diesel, automatic, 4WD, 156,500 miles, blue

2001 Chevrolet Silverado, ext. cab, automatic, 4WD, A/C, power windows & locks, 225,000 miles

2001 Toyota Tacoma, 4 cyl., 2WD, A/C, pre-runner pkg., cloth, 50% tires, approx. 222,000 miles

1999 Dodge Ram 1500, 1/2 ton, 2WD

1999 Dodge 1500 pickup, 4WD

1999 Ford F250, ext. cab, long box, 7.3 diesel, 4 spd. automatic, 4WD, 341,000 miles

1999 Ford, 3/4 ton, diesel, 170,000 miles

1997 Chevrolet, reg. cab, long box, 350, automatic, 2WD, shows 180,000 miles

1997 GMC, 1 ton, 6.5 liter diesel, 5 spd., 2WD, 11' service box, 6,000 miles on New motor

1996 Ford F350, 7.3 Powerstroke, 4WD, A/C, 8' service body, New single tires, aluminum rims, 275,000 miles

1995 GMC 2500, ext. cab, long box, 350, 5 spd., 4WD, power windows & locks, cloth bucket seats, side toolboxes, 161,000 miles

1990 Ford F350, crew cab, 7.3 diesel, flatbed service body, 160,000 miles

1990 Chevrolet, 1/2 ton, reg. cab, 6 cyl., 5 spd., 2WD

1987 Ford F350 XL Series dually, 7.3 liter diesel, 5 spd., 2WD, heat, A/C, power windows, flatbed w/removable high sides, 250 gal. asphalt emulsion tank & spray wand, low miles, New tires, brakes, PTO & pump

1987 Dodge, 1 ton, 4WD, under 80,000 miles, no A/C

1987 Ford F250 Lariat XLT, reg. cab, long box, 460, automatic, 4WD, Brute bumper, spring loaded hitch, tires 50% on steel rims, 135,000 miles, less than 20,000 miles on New engine

1984 Chevrolet Scottsdale, 305 gas, 4 spd., 4WD

1975 Ford pickup, 4WD

1967 IHC 1100 pickup, 1/2 ton, V8, 4 spd., 2WD

ENCLOSED TRAILERS

1985 Great Dane enclosed trailer, 48', living quarters in front w/refrigerator, (2) LP tanks, furnace, spot for generator, wired, lights in front, ramp-style rear door, air ride, 255/70R22.5 tires at 60%

2002 H&H enclosed trailer, 24’6”, 10,000 lb. gvw

1986 Wells Cargo tri-axle 5th wheel enclosed race trailer, 36'x13', drop-down rear door, observation deck, hoist to hold 2nd car, living quarters in front 22' w/full bathroom & kitchen

2006 American Hauler NH714TA2 tandem axle V-nose trailer, 7'x14', drop-down end gate

1991 tandem axle cargo service trailer, 8x18 w/roll-up rear door

DRY VAN & OTHER TRAILERS

Roadside single axle van trailer, 28', roll-up door, spring ride, 11-22.5 tires on steel

1980 Trailmobile dry van, 27’, roll-up door, side door, set up as job trailer, 11-24.5 tires on steel rims

2001 Great Dane dry van, (4) 1,600 gal. water tanks, Briggs 5 hp. pump, mix cone valves

2002 Wabash reefer trailer, 46’, (4) 1,600 gal. water tanks, Honda 5.5 hp. pump, 30 gal. mix cone

2003 H&H box trailer, 6-1/2'x14', 14" sidewall, fold down drive-on loading ramp

(2) 2006 PJ CH202 tandem axle trailers, 20', tilt beds, 7,000 lb. axles, 14,000 lb. gvwr

2005 PJ CH202 tandem axle trailer, 20', tilt bed, 7,000 lb. axles, 14,000 lb. gvwr

2004 PJ CH202 tandem axle trailer, 20', tilt bed, 7,000 lb. axles, 14,000 lb. gvwr

2011 Lamar car trailer, 7'x18', flip-up ramps, 14,000 lbs.

1996 Fechtner tandem axle bumper hitch trailer, 16'

Fechtner tandem axle trailer, 16'x6-1/2', flip-up ramps

Big II tri-axle gooseneck trailer, 18’, 6,000 lb. axles, single tires

Shop-built tandem axle snowmobile trailer, 7'8"x16"

Shop-built heavy duty 2-wheel trailer

Shop-built tandem axle trailer, 14'

1986 skid steer loader trailer, 6x12’

Tilt bed trailer, 4’x20’

Big Max trailer, 6'x9', flip-up ramp

Truck box trailer

Heil bumper hitch stock trailer, 16'

Horseman stock trailer, 6'x16'

Shop-built stock trailer, 20', electric brakes, lights, (2) 7,000 lb. axles

PULL-TYPE SPRAYERS

2003 Summers sprayer, 2 pt., 90' boom, 20" space, 2" fill, 500 gal. poly tank, 15 gal. foamer, MicroTrak rate controller, S/ND0163

Flexi-Coil 65 pull-type sprayer, 110' booms w/parts for 120' boom, 1,000 gal. poly tank, hyd. pump, Flexi-Coil monitor

Pleasure Products pull-type sprayer, 90' booms, 1,200 gal. tank, Hypro pump, PTO, basic shut-off

Riverbend Industries pull-type sprayer, 90' manual fold booms, hyd. height adj., 1,000 gal. tank, walking tandems, hyd. drive centrifugal pump

Shop-built sprayer, 30', 300 gal. tank, gas engine

Shop-built ATV pull-type sprayer, 30' folding booms, 110 gal. poly tank, hand wand, Raven 2-valve control, Honda 5 hp. gas engine

Pull-type ATV sprayer, 22'

Gas weed sprayer, 50 gal.

Elmers band sprayer, 24x22", 500 gal. tank, hyd. pump, hyd. fold, cab control, lift assist

Jake band sprayer, 24x22", 500 gal. tank, hyd. fold, hyd. pump, 3-valve shut-off cab controls

Keller band sprayer, 24 row, 500 gal. tank

AIR DRILLS & DRILLS

2004 JD 1820 air drill, 59-1/2', 7-1/2" space, 5-section fold, 4-rank, rubber press wheels, Stealth points, single/double shoot, JD 1910 tow-between commodity cart, 270 bu., variable rate, 28L-26 diamond tires, full blockage monitor, cart S/NA01910T700243, drill S/NA01820X705177

Case-IH 8600 air drill, 30', 7-1/2" space, rubber press wheels, dry fertilizer, monitor

Concord 3310 air seeder, disc levelers, markers, 2300 cart, 60/40 split tank, all hyd., Raven cold flow NH3, no Raven cab control

Case-IH press drills, (2) 6300-14', (1) 6200-14', fertilizer, markers, transport, 90% discs, all purchased new together, second owner

IHC 100 Series hoe drill w/hyd. transport

IHC 100 double disc drill, (2) 14's, markers

Grain drill

PLANTERS

2004 JD DB44 vacuum planter, 24x22", front fold, 1.6 bu. hoppers, in-furrow liquid fertilizer, Yetter row cleaners, vari-rate, Tru Count, poly scrapers, SeedStar monitor, corn & sorghum discs, S/NA0DB44X705103

1998 JD 1780 vacuum planter, 24x20", 3 bu. hopper, liquid fertilizer, hyd. fold markers, S/N381821

JD 71 flex planter, 6x22", 3 pt., hyd. markers

ROW CROP CULTIVATORS

2006 Wil-Rich PT7722 cultivator, 24x22", 44', wide depth gauge wheel, rolling shields, heavy shank, extra down pressure spring, (4) 7.50-20 single rib tires at 80%, (2) 7.50-20 truck tires at 80%, S/N456783

2006 Wil-Rich PT7722 cultivator, 24x22", 44', wide depth gauge wheel, rolling shields, heavy shank, extra down pressure spring, (4) 7.50-20 single rib tires at 80%, (2) 7.50-20 truck tires at 80%, S/N456784

Elmers cultivator, 12x20", 3 pt., rolling disc shields, New

Bush Hog Lilliston cultivator, 12x30", 3 pt., (2) gauge wheels

Case-IH 1830 cultivator, 12x30", 3 pt., rolling shields, flat-fold, (2) gauge wheels

Renn danish tine cultivator, 12x30", hyd. fold, rolling shields

Case-IH cultivator, 8x30", 3 pt., rolling shields, spring shank

JD 856 row crop cultivator, 8x34", 3 pt.

Lilliston rolling cultivator, 8x30”, 3 pt.

Shop-built cultivator, 12x30", hyd. fold

(2) Row crop cultivators, 8x30", no shields

JD RM cultivator, 8x30”

AC cultivator, 4 row, 2 pt.

ROTARY HOES

JD 400 rotary hoe, 30', 3 pt., flat-fold, (4) gauge wheels

JD 14 rotary hoe, 14', 3 pt. hitch

Yetter 3421 minimum till rotary hoe, 21'

Yetter rotary hoe, 30’

SHREDDERS, FLAIL CHOPPERS

2012 Wil-Rich pull-type shredder, 22', 1-3/4 1000 PTO, light pkg., S/NAGCWFS000CX460870

2006 Wil-Rich stalk shredder, 20', pull-type

1996 Loftness 264 BP-SSR shredder, 22', 1-3/4" 1000 PTO, (4) wheels, (2) lift cyl., (2) 4-belt drives, 9.5-15 tires at 50%, S/N7Q269

1995 Alloway flail shredder, 22', pull-type

Alloway pull-type shredder, 22', 1000 PTO, center drive, S/N23497

Alloway stalk chopper, 12x22", 3 pt., gauge wheels

Alloway stalk shredder, 22', (4) carrier wheels, 3 pt., 1000 PTO, New cutter knives

Alloway stalk chopper, 20', 3 pt., 1000 PTO

Alloway Woods shredder, 22’, 3 pt., 1000 PTO, rear gauge wheels, S/N527197

JD 220 stalk shredder, pull-type, 400 acres on New blades

SUGARBEET HARVESTERS & DEFOLIATORS

1998 Artsway 692 sugarbeet harvester, 6x30", row finder, all parts to make 8x22 included, S/NAW6929/8222

Artsway 690 beet harvester, 6x22"

Alloway defoliator, 12x22", steel fronts, studded rubber rear, 1000 PTO, front stabilizer wheels, S/NM696

Alloway defoliator, 8x30", front steel, rubber rear, 1000 PTO, S/N433545

Alloway Topmaster defoliator, 6x22", S/N12491

Alloway beet defoliator, 6 row, all rubber w/scalpers

Artsway Heath 786 defoliator, 6x22", steel/rubber/rubber with knife scalpers

BEAN EQUIPMENT

Lilliston 6200 edible bean combine, factory pickup, bucket elevator

Pickett One Step end delivery, 1-1/4" rod, 8x22" or 6x30"

Speedy bean knifer, 8x30"

Rod weeder, 20', 3 pt.

Bean windrower, 20' w/Sund pickup, center delivery

SWATHERS

Case-IH 721 pull-type swather, 21', auto fold, bat reel

Case-IH 721 pull-type swather, 21', auto fold, finger reel

1984 IHC 75 pull-type swather, 21'

IHC 75 pull-type swather, 21', canvas, bat reel

IHC 75 pull-type swather, 18', shedded, S/N1310101C007345

IHC pull-type swather, 21'

IHC 75 pull-type swather, 21’

JD 590 pull-type swather, 21', bat reel

IHC pull-type swather, 21’, bat reel

1993 MacDon 3000 swather, 21', auto fold, shedded

MF pull-type swather, 21'

Hesston 420T self-propelled swather, 16', Chrysler gas, hay crimper, bat reel

1975 JD 800 self-propelled swather, 18', Chrysler slant 6, bat reel, canvasses

Versatile 400 self-propelled swather, 20', bat reel

Versatile 400 self-propelled swather, 20', Chrysler slant 6, single stick hydro, pickup reel

MF pull-type swather, 21’

1990 JD 590 pull-type swather, 21’, always shedded

1991 JD 590 pull-type swather, 21’, always shedded

CHEMICAL/FERTILIZER EQUIPMENT

Demco side dresser, 24x22", 3 pt. bar, 1,000 gal. tank, Redball flow control, hyd. pump

Tow-between fertilizer/chemical caddy, 2,000 gal. cone bottom poly tank, valves, flow meter, Servo valve, pump & control box, 28L-26 tires

Pleasure Products 1,000 gal. spray pump, MicroTrak 3000 controller, hyd. pump

1,000 gal. fiberglass chemical caddy, hyd. pump combo

Willmar fertilizer spreader, 5 ton, PTO

Gandy 62AN18C granular applicator box

Gandy 6216 chemical box, orbit air, w/booms

Gandy box, 12 row

Gandy granular attachment, hyd. drive

Gravity drop spreader, 12', pull-type, for seeding of fertilizer spreading

Gustafson seed treater, SS tank, 12v pump, welded/repaired, had small hole

Shop-built side dresser, 16x30”, on JD vertical fold bar, 3 pt., manifold and Yetter liquid drop coulters

Handlair chemical mixer

WIC Super Sponge weed wiper, 30'

1,100 gal. water tank, on old truck frame

1,200 gal. tow-between chemical cart

1,000 gal. nurse tank, on running gear

(2) Snyder 200 gal. saddle tanks, quick-tach brackets, for JD 40-50 Series

(2) 200 gal. saddle tanks w/saddles

(2) 250 gal. saddle tanks, fits JD 8200

Chemical induction cone

60 gal. mix cone w/stand

30 gal. mix cone

20 gal. mix cone w/stand

Electric 2” nurse pump

STRIP TILL, NH3 EQUIPMENT, & TANKS

2008 Elmers deep bander, 24x22", 44', front coulters, trash wheels, mole teeth for dry closing discs & baskets, Raven NH3 super cooler, 2 wings, set up for Amity or any other single delivery type cart, 14-16.1 tires at 80%, used 3 years, S/N082341

2000 DMI 5250 deep bander, 24x22", (24) heavy shanks w/outer & inner heavy spring, mole knives, JD air cart ready w/(6) manifolds, closing discs, (2) wings, 8.11-16 tires at 60%

Dalton DW6141 strip tiller, 16x30", dry kit, no tank, single hose feed system, S/N14283

John Blue NH3 applicator, converted to 16x30" strip till, Raven SCS440 control w/radar, w/extra shanks

Ag Systems strip till, 12x30", 5 ton dry fertilizer box, markers, Raven NH3 cold flow, no cab control

2012 B&B NH3 applicator, 60', twin Raven coolers, walking tandems, spring shank, 3-bar harrow, uses Raven controller

Progressive NH3 applicator, 48', 15" spacing, no controller

NH3 applicator, 12x22"

Farmland 1,000 gal. NH3 tank on running gear

John Blue 1,000 gal. NH3 tank, New tires

1,500 gal. NH3 tank on trailer

1,000 gal. NH3 tank on running gear

1,500 gal. NH3 tank, John Blue running gear

1,000 gal. NH3 tank on running gear

1,000 gal. NH3 tank on running gear

(5) 1,000 gal. NH3 tanks

HAY EQUIPMENT

Hesston 1014 mower conditioner, 14', hydro swing, hydro pump, 540 PTO, one sickle

Case-IH 8370 haybine, 14’, swing tongue, 540 PTO, S/NCFH0082194

NH HT154 wheel rake, 12-wheel, walking tandems, S/N211327

Vicon hay rake, 6-wheel

Hay rake, 9-wheel

Da-Co 3-wheel hay rake, 3 pt.

2002 New Idea 4865 round baler, 5x6 bale, twin tie, net wrap, auto twine, soft core, 1000 PTO

1993 Vermeer 605K round baler

Vermeer 605J round baler, twine tie

2002 Buhler 6072 inline baler, auto twine, like new belts, 540 PTO

NH 320 square baler, hyd. tension & swing

NH 65 small baler

(2) Farmhand bale forks w/hyd. push-off

JD 200 bale conveyor, 24'

NH Stakliner 1000 pull-type bale wagon, PTO

(2)  Squeeze-O-Matic 11-bale handlers for loader

Large square bale handler for loader

Bucket-mount bale spear

Hay rack, 10x16, good deck & tires

(3) Bale carrier wagons, New

FORAGE EQUIPMENT

Richardton 4-wheel dump cart, slotted

S&H power wagon forage box, PTO, 8 ton running gear

(2) Hay feeder wagons, New

(2) Silage feeder wagons, New

JD 38 forage chopper, 2x30" head

NH 824 head, 2x30", fits NH 890-894

LIVESTOCK EQUIPMENT

Hi Qual calving pen, 10'x12'

James Way cattle feeder

Knight 410 manure spreader, no beaters

NH 518 single axle manure spreader, 18'

(120) continuous panels, 6-bar w/clips & connectors, 1-1/4' od., 14 gauge galvanized tubing, panels weigh approx. 150 lbs. each, New, sold in bundles of 10, price per panel

(60) 12' portable interlocking corral panels, 5', New, sold in lots of 10, price per panel

Cattle chute w/Weigh-tronix scale

Tag calf creep feeder, 3 ton, on wheels w/gates

Verns creep feeder

(3) Small stock tanks

250 gal. poly lick tank

(300) steel T-posts

T-style fence posts

Pallets T-posts

(4) Hog feeders, galvanized steel/cast iron, (3) are 5 bu.

SCREENERS & GRAIN VACS

Dakon rotary grain screener

Hutchinson rotary screener, 2 sets of screens

Kwik Kleen 772 cleaner, 10 hp., 3 phase, 480v

Kwik Kleen grain screener, 5 tube

Handlair 1400 grain vac, 4", 540 PTO, (2) flex, (1) straight, (1) rubber pipe

Handlair 560 grain vac, 1000 PTO, flex pipe, solid pipe & cleanup pkg., rebuilt vacuum lock, several feet of tubing sections

Handlair 560 grain vac, full set tubes, self-contained hyd. system

Conveyair 2970 grain vac, 540 PTO, full set of tubes

Handlair 1400 grain vac, steel & rubber flex, cleanup nozzle

AUGERS

Wheatheart SA auger, 111'x13", mechanical swing hopper, power swing, flex spout

2011 Wheatheart S1391 auger, 91'x13", mechanical low pro swing hopper, hyd. lift, electric hopper walker, wide stance, 540 PTO, S/N8015

2010 Westfield MK130-111 auger, low pro swing hopper

2010 Westfield MK130-91 Plus auger, swing low pro hopper

Westfield MK130-91 auger, hyd. swing low pro hopper, hopper walker

Artsway auger, 90'x12", swing hopper, hyd. hopper walker

Feterl auger, 90'x12", swing hopper

2009 Wheatheart auger, 81'x13", mechanical swing hopper, PTO, hyd. hopper walker

Feterl auger, 72’x10”, swing hopper, top feed

Westfield MK100-71 auger, swing hopper

Westfield MK auger, 71'x10", low pro swing hopper

Westfield 100-71 auger, low pro hopper, bad gear box

Westfield WR auger, 61'x10", 15 hp., 3 phase

Scoop-A-Second auger, 56'x8", PTO

Westgo 1210 auger, 52'x10", 3 phase electric

Top drive auger, 51'x8", electric motor mounts

Feterl auger, 42'x10", PTO

Westgo takeoff auger, 42'x10"

Westfield auger, 41'x13", 20 hp., 3 phase

Westfield auger, 36'x8", factory 3' ext., 10 hp., 1 phase motor

Brandt auger, 35'x8", PTO

Westfield W80-31 self-contained auger, Briggs 16 hp.

Versatile auger, 41'x8", PTO

Alloway auger, 30'x8", 13 hp. gas

Auger, 26'x7", brush flighting, PTO

Roof auger, 20'x12", 3 hp. Electric

Auger, 20’x8”, electric

Auger, 15'x4", hyd.

Auger, 11'x5", hyd. motor

Vertical takeout auger, 8", for bin

Auger ext., 15'x8"

Feterl 10" semi truck unloader, 7-1/2 hp., 1 phase

Grain pump, 8"x25', expandable, 4,000 bu./hr. cap.

(2) Augers, 40'x10", used as grain legs w/pulleys

Grain leg, 2,500 bu./hr., 70’, includes drive w/motor, No belt or cups

(3) 20'x10" u-troughs w/running gear

Auger hoppers

(3) Plastic hoppers for grain auger

Westfield endgate drill fill auger, 6" brush auger

Westfield endgate drill fill w/brush auger & steel auger

(2) Westfield endgate drill fills

Westfield endgate drill fill auger, brush flighting

Haul-All drill fill, 18'

Westgo drill fill auger

Killbros drill fill auger, 12'x6"

Drill fill, 18’

Hyd. drill fill, 18', electric shut-off

CONVEYORS

2008 Batco 1590 hydraswing belt conveyor, PTO, hyd. swing hopper

2007 Conveyall ORB-2450 belt conveyor, 52'x18", 60% belt, sectioned, ready for transport, S/N1007087221

Brandt 1545 Field Loader belt conveyor, 45'x15", 30 hp. gas

Rapat belt conveyor, 75'x18" belt, electric lift winch, 10 hp., 3 phase

GrainMaster belt conveyor, 32'x12", 5 hp., 1 phase

Batco 2500 Series drive over conveyor

(2) Batco 2035 conveyor, 10 hp., 1 phase

Rapat bag conveyor, 14', electric

Raptor belt conveyor, 20', set up for electric motor

Flat drive-over conveyor

Rapat conveyor, for under car

SS fertilizer conveyor, for under car

(2) Galvanized chain conveyors, 24”x24”, 20,000 bu./hr., 50 hp. motors & gear box drive

DRYER, AERATION & BIN EQUIPMENT

Farm Fans CMS-14E grain dryer, 3 burner, LP, continuous flow, single phase w/transport

Inline centrifugal fan, 230v, 3 hp., w/transition & electric heater

(2) Inline centrifugal fans, 230v, 10 hp., w/transition & electric heater

Inline centrifugal fan, 230v, 7.5 hp. w/transition & electric heater

Air Stream 26" axial fan, 13 hp., electric heater w/high & low settings

(2) Butler axial fans, 10 hp.

Butler centrifugal bin fan, 10 hp., 1 phase

(2) Butler air fans

Caldwell F281212 axial fan, 28", 12.5 hp., 230v, 1 phase

Farm Fans U-1036 Series fan heater unit, 10-16 variable hp., 230v, 1 phase

Caldwell centrifugal fan, 10 hp., w/Custom Marketing Y-floor and transition pieces for 27’ dia. bin

Axial fan, 15", 5 hp.

(10) 12" axial fans

Aeration fan, 220v

Air fans

(5) Bin fans

(2) Fans, 12.5 hp., off grain dryer

MFS aeration floor, 30', complete, New

Full floor aeration for 24' bin, w/legs & dual sump, 8" takeout auger

(10) 22' aeration tubes

Aeration tubes, 12" & 18"

(40+/-) aeration tubes

(7) screw-in aeration tubes w/fans

Air tube, 100' of 18"

(7) Aeration tubes

Misc. air tubes for bins

Small LP bin heater

(4) Steel bin burners

Wheatheart hyd. bin sweep

Bin sweep, 6", for 36' dia. bin, no motor

Bin sweep, 4", 1 phase, for 27' bin

Bin sweep, 10', 1 phase electric

Hyd. bin sweep

Powerhead for 36' dia. bin, no motor

(2) 8" 45 degree power heads

Incline powerhead, 10", no motor

Electric bin spreader, 240v, 1 phase

(2) bin spreaders, 120v

Approx. 600 pcs. bin floor stands

Grain leg distributor, 10”, 4-hole

(2) Gravity grain bin spreaders

Aeration fan, 1 hp.

Centrifugal fan, 20 hp., 3 phase

LOADERS & ATTACHMENTS

Woods Dual 355 loader, 8' bucket, grapple, Case-IH Magnum mounts

Schwartz 1800 quick tach loader, 7' bucket, joystick control, Case 730 mounts, very straight and clean, no welds, S/N44216

JD 746 loader, New 5-tine grapple, 7820 mounts & grill guard

Ford NH 5450 tractor loader, self-leveling

Koyker loader, 7’ w/JD 20 Series mounts

JD 48 loader, straight, good pins & bushings

Waldron front end loader, 4x4, dirt bucket & forks, S/N037688

Dual hyd. loader, w/bucket & 3-tine grapple, mounts for IHC 350

Farmhand F11C loader, 3 spool, PTO pump, 5' bucket

Loader, for small MF or Ford tractor

Farmhand 9' bucket w/4-tine grapple, New

Dual loader bucket, 5'

Versatech grapple bucket, 5-1/2', for loader

Snow bucket, 8', quick tach, for JD 840 loader

Snow bucket, 7', quick tach, for loader

Rock bucket, 80" w/hyd. grapple, quick tach mounts

Virnig pallet forks, quick tach, 48" forks

Set 48" forks

Forklift forks, 42”

Baker heavy duty forklift, 3 pt., 40" forks, hyd. cyl. for 3rd link

MDS loader bucket adapter, JD 740 Series to Global

ROCKPICKERS

Leon 3000A rockpicker, reel-type, ground drive, hyd. dump hopper

Richards Welding rockpicker

Tough T rock nabber, 3 pt.

Vermeer L106 reel-style rockpicker

Rock digger, 3 pt.

Crown rockpicker, fork-style

SCRAPERS

2012 Ashland I950 scraper, 9 yd., drawbar hitch, S/N23059

2008 Toreq 13000 scraper, 13 yd., laser mast, 16.9-24 front tires, 18.4-26 diamond tires, S/N13-3743

Letourneau scraper, 15 yd., conv. to direct mount, hyd. push-off w/single cyl.

Garwood 400 scraper, 12 hyd., hyd. push-off

Scraper, 8 yd.

Midland scraper, 6 yd.

Midland scraper, 4-1/2 yd.

JD scraper, 3 yd.

Hyd. dirt scraper, 1-1/2 yd.

Bush Hog SBX720 box scraper, 6’, 3 pt.

Eversman scraper, 2-1/2 yd.

MOTOR PATROL & GRADERS

1989 Champion 720A Motor Patrol, Cummins, 8 spd. powershift, 12’ blade, 2,420 actual hrs.

Galion pull-type grader, 14'

HyGrade pull-type grader, 14' blade

BLADES

(2) Hyd. blades, 10', 3 pt., New

Blade, 9', 3 pt.

(2) Hyd. blades, 9', 3 pt., New

King Kutter box blade, 7', 3 pt. w/scarifier

Blade, 7', 3 pt.

Blade, 3 pt.

Blade, 6', 3 pt., Cat 1

Shop-built blade, 5-1/2', 3 pt.

Blade, 3 pt., for small tractor

(4) Box blades, 10', New

(4) Box blades, 12', New

Heavy duty box blade, 10', tilt

Heavy duty box blade, 12', tilt

Box blade, 6', 3 pt.

Worksaver rear blade, 4’, for utility tractor

Blade, 4-1/2’, 3 pt.

LAND PLANE & LASER EQUIPMENT

Ashland land plane, 48'x12'

General LB4 laser ditching system, 360 degree sensor, hyd. mast, laser stand on cart, cab monitor, battery-powered stick-mounted receiver

Laser Beacon 5030AG laser with MCP400 cab monitor, receiver unit

Shop-built laser trailer

MOWERS

Bushwacker batwing mower, 20'

Bush Hog 3615 mower, 15', hyd. fold, 1000 PTO

Bush Hog mower, 15', hyd. fold

M&W solid frame mower, 15'

Modern Mfg. batwing mower, 15', large 1000 PTO, S/N30560

Woods batwing mower, 14', single fold, 1000 PTO, always shedded

Woods hyd. fold mower, 15', needs gear box

Woods batwing mower, 10'

IHC 1100 sickle mower, 9’, New box

Woods mower, 7', 3 pt.

Bush Hog SQ840 pull-type mower, 7', 540 PTO

Farm King mower, 84", 3 pt., 540 PTO

Farm King mower, 72", 3 pt., 540 PTO

IHC sickle mower, 7', 3 pt.

IHC sickle mower, 7'

JD 1518 mower, hyd. fold, 1000 PTO

JD 450 sickle mower, 7', trailing type

JD 265 disc mower, spent $1500 in parts

JD 260 rotary disc mower, 3 pt., S/NE00260A711119

JD 207 gyro mower, 5-1/2', 3 pt.

Woods S9144 turf trailing grooming mower, 12', hyd. fold, 540 PTO

2012 King Kutter finishing mower, 6', 3 pt., 540 PTO

2008 Woods RD grooming mower, 84", 3 pt.

Woods mower, 5', 3 pt., New but weathered

Woods L306 belly mower, 72", off AC WD45

Rotary mower, 3 pt., 540 PTO

Swisher trailing 5' gas mower

Jari mower

SNOWBLOWERS

2013 Lorenz snowblower, 78", hyd. spout, 3 pt., 540 PTO

Raths 299FH heavy duty front-mount snowblower, 8', dual hyd. spout, front hyd. lift cyl., rear PTO, JD 4440 mounts, modified to fit JD 4640, S/N12977180

Alloway Westgo 5260 snowblower, hyd. chute, 3 pt.

Farm King snowblower, 60", 3 pt., 540 PTO

Snowblower, 8', twin auger, 3 pt.

1989 JD 1032 snowblower, 32”, needs carb work

Montgomery Wards snowblower, 26" cut, Briggs 8 hp.

Arctic walk-behind snowblower, 26", 8 hp.

WHEEL LOADERS & TRACTOR LOADER BACKHOE

1996 JD 644E wheel loader, 3-1/2 yd. bucket, tires 60%, 11,000 hrs.

Caterpillar 966A Traxcavator wheel loader, rear steer, 2 yd. bucket

1995 Caterpillar IT28F wheel loader, A/C, quick tach, general purpose bucket, pallet forks, New brakes, 20.5R25 radials at 80%, 13,956 hrs., single owner

1973 Caterpillar 920 wheel loader, 17.5-25 tires at 90%, shows 5,800 hrs., New transmission & converter, S/N62K5210

Fiat Allis G45B wheel loader, 2-1/2 yd. bucket

1978 JD 410 tractor loader backhoe, S/N420-0304313T

EXCAVATOR & DOZER

1985 Caterpillar 225 excavator, 5,100 actual hrs., second owner, S/N76U05172

1980 JD 850 dozer, hydro, shows 7,642 hrs.

Dipper stick for Bobcat 331 or 334 mini excavator, extend-a-hoe, complete w/cyl. & hoses

ASPHALT EQUIPMENT

Dresser 10 ton asphalt roller, Cummins diesel, 50” wide smooth drums, lights, complete with working water system, low hrs., stored inside during off season

Multiquip Rammex Asphalt double drum roller, EROPS, diesel, 8 ton, smooth, vibratory, hydrostatic, former United Rentals piece

Gillcrest/Bomag 8-14RT asphalt paver, diesel, automatic augers, 8 ton bin w/folding hopper, 8’ screed & (2) 3’ ext. screeds, New rubber tracks, New paint, low hrs., purchased new in 1995, single owner

Layton towable 30 gal. asphalt tack and seal coat sprayer, gas motor

Concrete saw, walk-behind, gas engine, water system

Plate compacter, Honda motor

TELEHANDLERS & PLATFORM LIFTS

2002 Lull 644B telehandler, 99 hp. Cummins, 42' reach, 6,000 lb. lift, 4x4x4, tilt, foam-filled tires, 5,500 hrs.

JCB 508 telehandler, 44’ reach, 8,000 lb. lift, 4,723 hrs.

1999 Gehl DL8H telescoping forklift, open station, ROPS, 8,000 lb. cap., 42' reach, 4x4 outriggers, 3,900 hrs., S/N8H44PP1030268

2007 Genie 3268RT scissor lift, 1,037 hrs.

2007 Genie 3268RT scissor lift, 1,103 hrs.

2001 JLG 4005 boom lift, Deutz 49 hp. diesel, 40', 46' working height, 43'7"  horizontal reach, 360 degree boom rotation, 180 degree platform rotation, 4WD, 45 degree grade ability, 4.5 mph ground speed, weighs 12,650 lbs., restricted platform cap. 1,000 lbs., unrestricted platform cap. 500 lbs., donated by Acme Tools & all proceeds to be donated to American Cancer Society

JLG Candor MRI 126 scissor lift, 26’, 1,000 lb., AWD, Honda gas

JLG 7225 scissor lift, LP, 4x4

FORKLIFTS

2000 JCB 926 rough terrain forklift, Perkins diesel, 4x4, 6,000 lb. lift

1989 JCB 926B rough terrain forklift, cab w/heat, Perkins diesel, 4x4, 18’ lift, 42” forks, S/N926602111

AC 706 tractor forklift, LP

Mitsubishi FC18 forklift, gas

IHC 4500 Series B rough terrain lift, diesel, side shift

Clark forklift, LP, 2,500 lb.

SKID STEER LOADERS & ATTACHMENTS

2006 NH C190 track skid steer loader, CAH, 2 spd., aux. hyd., track 95%, 2,100 hrs., track was replaced last year

2011 NH L150 skid steer loader, open station, ROPS, front hyd., 1,400 hrs., New motor

Case 1845 skid steer loader, diesel, dirt bucket

Bobcat auger, 12" w/round drive

Caterpillar skid steer loader bucket w/grapple

Farmhand loader bucket, 8', Bobcat quick tach mount

(2) Jenkins tree and fencepost pullers, for skid steer loader, New

Jenkins skeleton grapple, 84", bolt-on end plates, New

Jenkins skeleton grapple, 78", bolt-on end plates, New

Jenkins skeleton grapple, 74", bolt-on end plates, New

Jenkins skeleton grapple, 68", bolt-on end plates, New

(2) Jenkins walk-through pallet forks, 5,500 lb. rating, New

Jenkins walk-through pallet forks, 5' carriage, New

Jenkins backhoe attachment, New

Jenkins bale spear, New

Lowe 750CH hyd. auger, 12", skid steer loader quick tach, New

Lowe 750CH hyd. auger, 9", 12" & 15" bits, skid steer loader quick tach, New

Lowe 1650CH hyd. auger, 9", 12" & 18" bits, skid steer loader quick tach, New

(2) LP Reel reel-style rockpickers, hyd. reel, for skid steer loader

Melroe utility fork, 60" w/grapple

Stout XHD84-6 brush grapple, skid steer loader quick tach, New

Stout HDU72-4 brush grapple, skid steer loader quick tach, New

Stout HD72-3 rock bucket/brush grapple combo, skid steer loader quick tach, New

Stout 72-FB grapple bucket, skid steer loader quick tach, New

Stout material bucket, 84", double cut edge, skid steer loader quick tach, New

Stout receiver hitch plate, New

Stout grapple attachment add-on

Stout regular weld-on skid steer loader plate, New

Stout solid weld-on skid steer loader plate

Stout tree & post puller, skid steer loader quick tach, New

Stout walk-through pallet forks, 48", skid steer loader quick tach, New

Stout full-back pallet forks, 48", skid steer loader quick tach, New

Pallet fork, 54" tines, for skid steer loader

Weed badger, for skid steer loader

(2) Skid steer loader buckets, New

Pallet forks, 48", skid steer loader quick tach, New

(6) Weld-on quick tach plates, New, for skid steer loader

Fork ext., 7', New

Fork ext., 8', New

Caterpillar 72” bucket w/grapple

(4) Bobcat 23-8.50-12" skid steer loader bar lug tires, 6-ply, fit Bobcat 440, 453,463, New

(4) Forerunner SKS-1 12-16.5/E skid steer tires, 12-ply with rim guard, super traction, high stability, New

(4) Titan 27-10:50-15" 6-ply bar lug tires, mounted on New 6-bolt rims, 6" dia. bolt pattern, New

(4) 27-10:50-15" skid steer loader bar lug tires, (3) are Titan 6-ply, (1) Dico 8-ply, fit Bobcat Toolcat 5600

(4) 12:00-16.5 skid steer loader bar lug tires, 10 & 8-ply rating, fit Bobcat 853, 863, 873

(4) 14:00-17.5" skid steer loader wheel rims, 8-hole mount, 8" dia. bolt pattern, New paint

Jackhammer for Bobcat skid steer loader

(2) Redline Mfg. solid receiver plates

(2) Redline Mfg. solid quick tach plates

Redline Mfg. rock bucket grapple, 72”, New

Redline Mfg. snow/light material bucket, 96”, New

Redline Mfg. heavy duty round bale spear, New

Redline Mfg. heavy duty square bale spear, New

Redline Mfg. walk-through pallet fork, 5,500 lb. w/hyd. fork shift, New

(2) Redline Mfg. walk-through pallet forks, 5,500 lb., 48”, New

GENERATORS & CONST. ITEMS

Diesel generator, 60 kw, on 2-1/2 ton military trailer

(2) Hatz 790 diesel, air-cooled 2 cyl. engine, 30 hp., 12v system, military surplus w/low hrs., one missing starter

1995 Lima Mac diesel gen set, JD 7.6L engine, 150 kw, 188 kva, 480v, 3 phase, approx. 9,000 hrs., on 4-wheel trailer

Kohler generator, 25 kw, on trailer

Tiger Power diesel generator, 6 kw, 1 hrs. of use

Titan Industrial diesel generator, 6.5 kw, low hrs.

WWII military generator, 4 cyl. gas motor, mounted on skids

Generac generator, 6500 watt

Miller Legend 200LE welder/generator, 18 hp. Onan gas engine, 6,000 watt

Coleman Power-Mate 5000 generator, 5000 watt, Briggs 10 hp., low oil shutdown

Endress ESE5006 generator, 5000 watt, Briggs 9 hp.

Kohler diesel generator, 190 kw, 355 Cummins, 600 amp breaker, 120/240v, 3 phase, Fast Response transfer switch, motorized louvers, 177 hrs., with 50 gal. fuel barrel

ICS 633GL gas concrete chainsaw, 12"

Vermeer M12 auger backfiller, Lombardini 1 cyl. diesel

12' man basket for forklift

Manlift, fits on pallet forks

OSHA approved warehouse 7-step ladder

Concrete power screed, 3 hp. gas

Misc. concrete hand tools

(2) Man baskets, 4’x12’

COLLECTIBLE TRACTORS & HORSE EQUIPMENT

1945 JD A, wide front, restored, New tires

JD 720 Standard, pony motor, New tires, S/N7216016

1949 MM ZAU, 36 hp., 12v, S/N006490165

Wood horse evener

Doctors buggy w/top, wood wheels, mostly restored

Covered wagon on steel wheels, mostly restored

English saddle & misc. horse tack

1963 IH Cub, with Woods 59C mower deck

AC B, with Woods 59SC mower deck, PTO

OTHER EQUIPMENT

(2) 2006  BBI TPHP4534 lime spreaders, 8'x22', all hyd., dual hyd. motor drive per side, heavy 3 chain, belt w/slats, 14 ton running gear, 19L-16.1 tires at 80%, S/N0003457, S/N0003458

Pull-type tile plow

Waynes frame-mount tile plow for Versatile

(2) Shop-built rock wagons, 28"x48"

Seed tender, 175 bu., brush auger

Innes windrower/swath fluffer

Jackson swather transport

Spra-coupe transport dolly

Drill transport, for 12'-14' drill

(2) JD planter bars, 12x22x7" w/lift

Bish header adapter, MF to JD

King Kutter rototiller, 6', 3 pt., 540 PTO

DR Rotohog pull-type rototiller, 36", B&S 9 hp.

Unverferth DP planter hyd. drive conveyor filler

4-wheel running gear w/header brackets

Running gear, 8 ton

Aluminum pipe, 930' of 6" w/clamps, stationary end gun

Ag Fab convertible poly cart, 500 lb. cap., 14.4 pneumatic wheels

Car dolly, 2-wheel

Posthole auger, 3 pt., PTO

Forklift mast, no forks

Pull-behind disc, 5', for ATV

Dirt bucket, 3 pt.

Forklift, 3 pt.

PTO wire winder

Quick hitch adapter, 3 pt., Cat 2-3

Category II 3 pt. quick tach

Front-mount cone guidance w/hyd. cyl.

Broadcast spreader, 3 pt.

F&S weed roller, 4'

Dickey John portable moisture tester

Maples Mfg. mist fogger

Rotary ditcher

UTV utility sprayer, 12’ booms, 50 gal. tank, 12v  pump

Header mover, 3 pt.

Canola roller for pull-type swather, used 2 seasons

Scraper hitch for Quad tractor

Pickup box trailer

Shop-built transport for self-propelled swather

Pleasure Products 1,000 gal. fiberglass tank

Onan generator, 15 kw, PTO

Fuller Johnson hit & miss engine, 3 hp., 22” fly wheels, on cart

GPS EQUIPMENT

JD ITC globe, SF2

JD 1800 AMS screen, SF2 & Swath Pro

Case-IH Pro 600 touch screen

Case-IH Nav 2 controller

Case-IH 262 receiver globe

JD Universal AutoTrac ATU

SUVS, VANS, & AUTOMOBILES

2001 Chevrolet LS1500 Suburban, Vortec 5300 V8 gas, automatic, 4WD, A/C front & rear, AM/FM/CD stereo, power bucket seats, center & rear seats, power windows, cruise, rear heater, cargo doors, luggage rack, 265/70R16 tires, shows 129,800 miles

1999 Mitsubishi Montero Sport, 121,000 miles

1998 Mercury Sable, transmission replaced, shows 146,000 miles

1996 Sport van, 195,706 miles

1996 Pontiac Bonneville, 3.8 liter

1994 Lincoln 4 door sedan, 205,000 miles, needs brake work

1992 Chevrolet van

1977 Jeep CJ5, AMC 304 V8, 3 spd. manual, fiberglass body

1966 Ford Mustang for rebuilding

1963 Ford Falcon for rebuilding

MOTORCYCLES, ATVS

2006 Titan Radical rigid chopper, 112 S&S engine w/Super "G" carb, polished engine fins, heads, 6 spd., Titan Gothic "T" aluminum wheels, 25mmx18" rear tire, 120/90 21" front, braided oil lines & cables, chrome handlebars & hand controls, pearl white custom paint, custom exhaust pipes, head shield set, inverted front forks, 3,500 miles

2001 Harley Davidson FXDWG2 Dyna Wide Glide 2 motorcycle, Screamin Eagle nitrous kit, nitrous heater, Pro clutch, detachable windshield & back rest, extra seat & back rest, bike cover, 15,800 miles, single owner

1980 Suzuki motorcycle, 750cc, runs good

2004 JD CX Gator, 2WD, manual lift box, turf tires, 260 hrs.

2010 Arctic Cat 700 EFI, 4x4, power steering, winch, 8,000 miles, aluminum rims, stuck in 4WD

2001 Arctic Cat 500, 4x4, automatic, windshield, winch, front & rear racks, front blade, 440 miles

1995 Polaris Magnum ATV, 4x4, windshield, tow bar, 3,200 miles, does not run

Polaris 250 ATV, 2x4 w/sprayer, for parts, No Title

2006 SUNL SLA117 mini ATV, 4x4

ATV, 4-wheel, 49cc

ATV, 3-wheel, for parts, gas tank has hole

RECREATION

1994 Winnebago Minnie Winnie motorhome, 29', Ford F350 chassis, 460 gas, automatic, 84,000 miles

Sea Nymph fishing boat, 14', Evinrude 9.9 hp. motor, Minnkota trolling motor, Hummingbird depth finder, & trailer

1995 Tiger Shark jet ski w/trailer, OH’d engine, has starter problems, does not run

Shop-built fish house, 7'x12', crank down wheels, cedar interior, stove, table, (2) windows, lights, steel siding

Suzuki boat motor, 35 hp., oil injection

Evinrude motor, 15 hp.

(2) Go karts w/Honda motors

Golf cart

Puch motorized pedal bike

LAWN & GARDEN

Jacobson Textron HR-5111 commercial mower, 4WD, diesel, hydro, all hyd. motors replaced, main pump in the last 500 hrs., S/N69116-4404

JD F932 front deck lawn tractor, 72" deck

Toro Groundmaster lawn tractor, 72" deck, 3,974 hrs., S/N00294

Case 444 lawn tractor, 14 hp. Kohler, 60" deck, hyd. tiller

2001 JD 425 all wheel steer lawn tractor, 20 hp. Kawasaki, 54" deck, bagger, 921 hrs.

JD 445 lawn tractor, 22 hp. Kawasaki, 54" deck, 1,110 hrs.

2008 JD Z425 lawn tractor, 22 hp., hydro, 48" deck

JD 317 lawn tractor, New series 20 hp. Kohler motor, 48” mid-mount deck, 44” rear-mount tiller

JD LX280 lawn tractor, 42" deck, 470 hrs.

JD STX riding lawn tractor, 38" deck

JD LT133 lawn tractor, 13 hp., 38" deck, S/NM0L133A099521

Poulan Pro 700EX mower, 22 hp. B&S, hydro, 54" deck, JD 42" snowblower

2001 Craftsman lawn tractor, 14.5 hp. B&S, 6 spd., 42" deck

(2) Echo Bearcat SC2170 chipper/shredders, 2" model, New, show machines

Echo Bearcat SC3342 chipper/shredder, 3" model

Toro self-propelled walk-behind mower, 42", S/N 30103-80387

JD JA62 self-propelled push mower, 2 spd., 6 hp., no bagger

Earthquake 196CC rear-tine garden tiller, gear drive

Pull-type lawn roller, 6-1/2'

Walk-behind fertilizer spreader

Mower deck

ATV lawn rake, 6-wheel

ATV trailing fertilizer spreader

Push mower

JD edger

JD rototiller, off JD 112

JD leaf blower

SHOP EQUIPMENT

1952 Monarch lathe, 24’ swing, 7’2” between center

Clark American Lincoln 576-426 self-propelled sweeper w/charger

IR air compressor, 50 cfm, S/NUNI-15-115H

Lincoln Idealarc R35-325 welder w/LN-7 Squirt wire feeder, 230/460, 220/440v

Linde VI225 power supply welder

20th Century welder, 220v

Century wire feed welder, 225 amp w/cart

Cox Reels air hose reel, 50', 1/2" hose

Craftsman shop vac, 30 gal.

Hot Sting hot water pressure washer, 120v electric

JD A75 portable air compressor

Lincoln power greaser, never used

Reddy heater

Reznor hanging gas heater

Rigid 300 pipe threader

Ryobi compound miter saw

Parts washer

Bench grinder, 8", 3/4 hp.

Gas portable winch

Warehouse roller

Large wire clamps, for pulling cable

Screw jacks

Chain come-alongs

Lever jacks

(2) Circle saw mandrels

Hyd. jack, 10 ton

(6) Hyd. jacks, 20 ton

(2) Large snatch blocks for winch lines

Chain hooks

Chop saw, 110v

(2) Lincoln 12v grease guns, batteries & chargers

(2) Metal shop benches w/levelers, 4-drawers, (2) doors, 1" thick slate tops

Wall-mount press drill

Table saw

(8) High bay metal halide lights

Pallet racking, 10-1/2-9-1/2, (5) towers

Pallet racking, 12'x12', (6) towers

(3) Metal shelves, 6'x7'

Portable air compressor, 4 gal., 28 gpm, 120v

Hot water washer, 3000 psi, LP burner, gas-powered pump

Portable air compressor, 6.5 hp. gas, 100 psi, 11.9 cfm

Pallet load straps & ratchet tighteners, misc. lengths & widths

Waste oil tank heater, 250 gal.

Retractable reel & hose, approx. 20', for cutting torch

(2) Older pressure washers, non-working, parts only

(4) High bay flood lights

Battery & alternator tester

Hose reel, 2" & smaller hose reel

Large hose reel

1" gas hose w/nozzle & hose reel

Pallet jack, 2 ton

Heavy duty metal band saw

(4) High bay halide lights

Misc. come-alongs & chain binders

(2) 110 gal. oil tanks w/stands

(2) Bench vises

Hose reel

Pallet jack

Reelcraft 30000 hose reel, New

Sears Craftsman air compressor, 25 gal.

JD 320 power washer, for parts

Karcher power washer

Air compressor

Lift Rite shop lift, 12v

Black Max vertical oil free air compressor

Cherry picker

Jointer and stand

Power band saw

Lincoln battery power grease gun

Anvil

Workshop desk

POLY TANKS

(3) 3,000 gal. poly tanks

(3) Enduraplas 2,000 gal. poly tanks

1,900 gal. poly tank

1,100 gal. poly tank

1,000 gal. flat bottom poly tank w/band

300 gal. poly water tank

200 gal. poly spray tank, 3 pt.

FIBERGLASS & OTHER TANKS

Pleasure Products 2,000 gal. tank

Pleasure Products 1,300 gal. fiberglass water tank

Red River 1,200 gal. fiberglass tank, enamel finish

500 gal. galvanized water tank, on skid

(2) 300 gal. liquid tanks

FUEL TANKS

2,000 gal. fuel tank

1,000 gal. NH3 tank, converted to fuel tank, New pump, 4-wheel running gear

(2) 1,000 gal. fuel tanks w/Gasboy pumps

1,000 gal. fuel tank

1,000 gal. diesel tank w/pump

(2) 1,000 gal. steel single wall fuel tanks

(3) 560 gal. fuel tanks, Gasboy pumps

560 gal. fuel tank w/pump

560 gal. gas tank w/electric pump

(2) 500 gal. fuel tanks

500 gal. fuel tank, 12v pump

300 gal. upright gas tank, on stand

200 gal. fuel service tank, no pump

200 gal. fuel service tank w/pump

200 gal. steel single wall fuel tank

110 gal. service tank, 2 compartment, electric pump

110 gal. L-shaped fuel tank, hand pump

100 gal. fuel service tank

100 gal. service tank, w/electric pump

100 gal. fuel service tank, no pump

100 gal. gas tank, on stand w/12v pump

75 gal. fuel tank, 12v pump

65 gal. service tank w/pump

40 gal. fuel tank, No pump, cage on top

Small fuel tank

TIRES

(8) Firestone 20.8-42 tires, 35%

(2) Firestone 14.9-24 traction tires, on rear Case comb. rims

(8) Firestone 20.8-42 radial tires

Set Goodyear 18.4-38 hub duals & hubs, 80% tread, off JD 4240

(2) Goodyear 380R950 tires, 35%

(2) Goodyear 14.9R46 tires, 40%

(2) Titan 16.9-28 backhoe tires, 10-poly, 25%

(4) 380/90R46 tires at 45%

Set 30.5-32 tires and JD rims for 9660

(4) 7:50-20 inner tubes, New

(2) 800/50R25 flotation tires on 8-hole rims, like new

(2) 14.9-24 tires on 8-hole rims

18.4-38 rims & spacers for Case-IH

20.8-42 Case-IH rim

(2) 18.4-34 tires, 50%, on JD rims w/cast centers

10:00-16 3-rib tire on JD 6-bolt rim

(2) 16" flotation rims

Dual rim for NH square baler

IHC rim, fits M or H front wheel

(2) 14.9-24 tires & rims, off JD 9600

(2) 18.4R26 tires & rims w/fluid, off JD 9760

(4) 11L-15 implement tires, New

Set 12.4-30 monorib tires & JD rims, 50-70%

Set 11.25-28 monorib tires & JD rims, 50-70%

Set 7.5-16 monorib tires, 6-bolt rims, 40%

(2) Sets 7.50-20 monorib tires, 8-bolt rims, 40%

Set 18.4-38 band duals

Set 14.9-46 band duals, (1) 70%, (1) 20%

Set 16-26 rims, 8-bolt

Set 21.5-16.1 tires & rims, 8-bolt w/bolt-on hubs, off Fargo air cart

(4) Firestone 18.4-26 tires on rims

(4) 18.5-8:50R8 tires and rims

(4) 275/70R18 tires

520R42 tire

(2) 11.2-24 tires & rims, 6-ply flotation, for Versatile swather

DT800 380R50 tire

Set (4) 18.4-42 tires, w/rims, for JD 60 Series

(2) Tracks, 28", 35%, for Cat Challenger 65-95

(6) 11.25-28 monorib tires on IHC rims

(2) 30.5-32 tires, 30%

(2) 24.5-32 tires on combine rims

18.4-42 on IHC rim

9-bolt rim for 18.4-38

13.6-28 tire

17.5-25 scraper tire

(2) 7.50-20 monorib tires on Case rims

(5) 7.50-16 monorib tires on rims

(2) 16.9-28 used tires

(2) 14.9-24 tires, used

(2) 18.4-34 band duals

18.4-42 rim for 10-bolt hub

(2) 280R35 tires, 35%

(2) 12.4-30 single ribs on JD rims, New tires

(2) 7.50-20 single ribs on IHC rims

(2) 24.5-32 tires, 50%

Set 18.4-38 tires

(2) 12-38 tires w/rims, off IHC H

(2) 18.4-26 tires on 8-hole rims

(6) 20.8-42 tires

(4) Sets single rib tires

Set Firestone 12-28 band duals

Unicure 17.5-25 payloader tires

(2) 30.5-32 rice tires, 10-ply, 80%

Set band duals, 23.1-26 w/hardware

Set band duals, 23.1-26 w/hardware

31-13.5-15 tire on JD 6-hole rim, New, fits JD no till drills

33-15.5-16.5 tire on JD 8-hole rim, New, fits JD hoe drills

18.4-30 band duals, 70% w/hardware, off Case-IH

(5) 13.6-46 rice tires, 50%

Set 18.4-24 tires for backhoe

14.9-30 front band duals, less j-bolts

(4) 11:25-28 monorib tires for MFWD

(3) 12-16.5 tires

(2) 23.1-26 tires

Set 14.9-46 band duals w/hardware

Goodyear DT710 18.4-38 tires

Goodyear DT710 14.9-30 tires

Goodyear 380/80R38 tires

(2) Firestone 14.9-24 tires, 70%

BF Goodrich 16.9-24 tire

Firestone 11.2-24 tire, New

Goodyear 14.9-24 tire, 60%

Titan 14.9-24 tire, New

Set 380/90R46 tires & rims

P215/70R15 tire on 4-bolt rim

6.70-15 implement tire on 4-bolt rim

(2) 25-12.9 ATV tires & rims, never used

(2) LT 265/70R17 tires

(2) 7.50-16 single rib tires on 8-bolt rims

10:00-20 wedge style truck tire and rim

(4) Goodyear Wrangler P275/60R15 tires on aluminum rims, for Dodge 1/2 ton

(2) Firestone 7.50-16 mono rib tires on 6-hole rims

(2) Goodyear 7.50-18 mono rib tires on 8-hole rims

TRUCK TIRES

(12) Super singles, 445 on 10-hole aluminum wheels

(2) 11:00-20 tires on Dayton rims

(4) 235/65R17 tires

(2) 235/75R15 tires on rims

(2) 14/80R20 front tires

(4) 11R22.5 tires, on steel pilot hub rims

11R22.5 steer tire on pilot hub rim

(3) Ford 16" tires on 8-hole rims

(3) T265/70R17 tires

(3) 10R22.5 tires

(3) 10:00-20 tires on rims

(4) 265/75R16 tires

(2) 11R22.5 tires on rims

(6) Firestone 9:00-20 tires on rims

(2) 7.60-16 single rib tires w/8-bolt rims

(2) 8:25-20 tires on 10-hole rims

(2) 11R24.5 tires on steel rims

(7) 11R24.5 recap tires on aluminum budds

(4) 14-24 tires

(12) Truck tires

(4) Goodyear Wrangler P275/60R15 tires on aluminum rims for a Dodge 1/2 ton pickup

(4) Bridgestone P225/75R15 tires on 5-hole rims

Ford aluminum wheels & tires

Assorted other misc. tires & rims

PARTS

2009 Ali Arc aluminum bumper & grill guard, for Peterbilt 386

2009 Ali Arc aluminum bumper & grill guard, for Kenworth W900

2009 Ali Arc aluminum bumper & grill guard, w/lights, for Kenworth W900

(3) Ali Arc bumpers, off Peterbilt 378/379

Service body, 8', w/storage compartments & ladder rack

Flatbed, 24'x96", galvanized side panels, New paint & lights

Knapheide 10’ flatbed

(2) Chevrolet/GMC 2500 pickup boxes, fit 2007-2013

Fiberglass service body, 8’

2009 Crary CWS fan motor w/PTO shaft, broken bolt holes

Crary full reel, fits JD 630F, New in crate

Dosatron Injectomatic with tanks

Gandy fan & hyd. motor

GMC 305 pickup motor

(2) Guide row guidance systems, 3 pt.

Horvick chaff spreader

Corn head cob saver

JD hyd. FWA, off 4440 w/12.4-24 tires & rims at 70%

JD cast quick hitch, Cat 2 or 3

JD mechanical plow lift

Lange NH3 knives

Loupe 12-row blockage monitor system

Mopar aluminum toolbox from 1997 Dodge Ram 1500 pickup, dual cover opening, locks w/keys, fits 61" wide pickup bed

Peterbilt fuel tank w/mount, split for wet kit

Peterbilt fuel tank w/mount

Peterbilt passenger side step box

Redball liquid fertilizer flow indicator, 36 row

(8) Sets Shoup (16) discs for JD 9350, like new

Squibb Taylor NH3 controller, removed from applicator, never used

(3) Sund pickups, 11'

True Force meter system

Unverferth planter fill conveyor for JD planter

Westgo truck box endgate

Hyd. wet line kit, tank & hoses

Schnell bean conveyor for 9750/9760

Pallet JD air tubes, off JD 787 air cart

Pallet gauge wheels, for planters and cultivators

(2) Sets saddle tank bracket for JD T tractor

Misc. PTO shafts

Misc. hyd. cylinders

Gearbox for WIC defoliator

Pallet of truck mud flaps

Set of Haukaas markers, 48'

FMC insecticide set up for JD 48 row planter

Rolling baskets for JD 44' field cultivator

Wet kit, steel tank, off semi tractor

(2) Semi brake drums, New

(2) Front bearing hub assemblies, New

Flatbed, 7', off pickup

GM 5.7 liter diesel motor

(2) Chevrolet small block motors

(3) Suitcase weights for NH Genesis

Saddle for 300 gal. tank

Approx. (50) JD rake teeth, rubber mount

(4) Gauge wheels, for JD 985 field cultivator

Front weight bracket & (5) suitcase weights for JD 40 Series

Front-mount fuel tank, for JD 40 Series

(60) Cultivator shovels

(2) Saddle tank brackets, 3 pt.

(8) Cutting coulters, for Brillion ripper

(16) Cutting coulters, for Brillion ripper

5th wheel assembly, for semi tractor

Crankshaft, good for JD 8000 Series, #201005, JD 8100/8200

Complete engine from 4320, includes everything from fuel pump, injectors, turbos, etc., 7,000 hrs., for 4010, 4020, 4430, 4630

Implement hitch

Tractor chains, 18.4-34

(3) Corn head snouts, for 1083

IHC chisel shank

(33) 33" twisted shovels for chisel plow

Rear spindles, off JD 9600

Rear spindles, off JD 9760

Rear spindles & rims for 18.4-30, off JD 9770

New beet chain, 3/8"

Set 10-bolt hub ext., 6"

Rear tire weights for JD 8430

JD straw chopper assembly for JD 9650, approx. 610 hrs. of use

Snowmobile hood for 1989 Arctic Cat El Tigre EXT

Pickup toolbox

Misc. hyd. cylinders

Aluminum headache rack for semi

Disc levelers, for 40 Concord

NH3 for 40' Concord

Truck hoist

(4) 6-15 6-bolt implement rims

(16) WIC lifter wheels

Disassembled Alloway topper, 12x22", drums, struts, pulleys, shafts, etc.

(2) Front fenders, for JD 8300

(2) Long snouts for JD 635

Asst. semi front-mount tow hooks

(15) Suitcase weights for Case-IH

(15) Suitcase weights for NH

(2) 10-bolt hub duals

(2) 10-bolt large center rims

Tommy gate, electric/hyd., for 1980-1996 Ford F Series

(7) JD 1610 chisel plow shanks

Fine cut chopper for JD 9600

Misc. Cat Challenger parts, including rear drive wheel, mid-rollers, front idler wheel, wide swing drawbar

Misc. roll tarp parts

(8) Rolling shields

Complete 3 pt. hitch, for Versatile 800-875

(2) 9-bolt & (2) 10-bolt IHC hubs

(2) JD MFWD front fenders

(2) JD dual spacers

(2) IHC dual spacers

(3) Pallets various IHC 60-80 Series concaves

(2) JD fenders for JD 4020

(9) JD seed tubes for 7100 planter, New

Universal lawn tractor seat

(80) JD male hyd. tips

(2) planter/drill marker spikes

(2) 18-38 hub dual rims, fit 9-bolt hub, for 20.8-38 tires

(20) S-tine cultivator tines

Misc. cultivator guide wheels & cones

(2) Bundles reel wrap, for JD reels

Disc section & disc levelers, off 7-shank DMI

Front guidance discs, off Case-IH MX

Cone disc set

Cone disc & bracket set

(2) Pallets JD tractor parts

Pallet JD combine parts

Low tin divider, for JD 643 corn head

(32) JD insecticide boxes

JD planter parts

Sugarbeet harvest parts

Pallet parts

Dual spacers

Feeder house caddy, fits 9600

50 gal. gas saddle tank for truck

Set aluminum running board/foot steps, from 1997 Dodge Ram 1500 Series long box pickup, front boards are 80"x6" wide w/brackets, rear boards are 36"x6" wide w/brackets

Mufflers for 35-50 hp. engines, may require inlet adapter

Header reel paddles

Hyd. reservoirs

Red bumper for IHC 9200

Gas nozzles

Hyd. cylinders

(2) Field cultivator rear hitches

(7) Alloway RTS baskets, hyd. cyl., 42' w/brackets

Planter guide markers

Guide coulters for planter

Robot reel conv. kit, for JD 635

(50) Flex fingers for JD head

Pallet used disc blades

(2) Sets front wheel dishes for JD MFWD

(24) Drags for JD planter, New

Tow bar for 1999 Dodge 3/4 ton pickup

Dust diverter collector, fits 9600

Front fuel tank for Case-IH

Front fuel tank for JD 4430

(2) Sieves for JD 9660-9860

Motor mount for Hutchinson auger

(8) Dakon rolling shields, from IHC 30' field cultivator

Misc. sprayer parts

Straw chopper, off JD 7700

Pallet chisel sweeps, 14"

(7) 24.5 steel rims

Pallet JD 1850/1860 no till drill parts

(2) 9600/9610 slow down kits w/screens

Carts off Brittonya band sprayer

Pallet cultivator, shovels, sweeps, NH3 support items

Side cones, for front of MFWD

(2) JD rear hub assemblies

Pair JD 6" wheel spacers for 9650

School bus hood

Pallet disc blades, JD planter plates

(3) Receiver hitches

Pallet hyd. cylinders

Pallet danish tines w/clamps

JD lift assist attachments, complete

Pallet Alloway cultivator parts

Specialty rotor for 2388, repairable

Pallet Alloway beet harvester belts

Knock-on stealth openers for Flexi-Coil 5000

Front axle spacers, for JD 8000 Series, 16"

Global-style mount for JD loader

Plow coulters

Drill fill downspouts

Misc. rims

Assorted JD rims

(10) 7,000 lb. axles, 12.5L-15SL tires, 6-bolt rims, New

Hyd. pump

(2) Chrome 48" pipes

Steel step fuel tank

Steel bat for bat reel

9-bolt dual hubs for JD 4440

Gearbox for JD corn head

Moldboard plow parts

Misc. NH3 controller & manifolds

Leer short box topper for 2011 Chevrolet

Misc. parts

Over-the-cab pickup rack

Lifter wheels

Fingers for JD 930 flex head

(2) Crary air reel gear box, fan, driveline

Chisel plow parts, points, harrows, spikes, etc.

(3) Sets JD filler bars for 9600

Beet chain for 12 row top conveyor

7100 planter boxes

WIC lifter close ups

Hayden oil cooler

GVL corn snout for JD

Danish tines, cultivator shanks, shovels

Takeoff box for 2008-2014 Chevrolet 3500 dually w/Access roll cover, 5^th wheel hitch, rear endgate & bumper

Reinforced front axle knees for JD 20 Series

Hiniker cab for JD 20 Series

Hopper cleanout chute for JD 9600

Chevrolet pickup wheel moldings, New

Universal shaft monitor, New

Set small wire concaves for Case-IH 2388

(5) Head dividers for Case-IH 1020

(8) Salford weights for Case-IH 2388

Set large wire concaves for Case-IH 1480

(3) Sets small wire concaves for Case-IH 2388

Single misc. wire concave for Case-IH

(12) Disc scalpers for Alloway beet topper

Finger reel, 18’

Bat reel, 21’, for Case-IH swather

Piston fertilizer pump

Grill guard for Dodge

(2) 17” rims

(65-70) sprayer double swivel nozzle bodies

Pallet (3) nitrolators

Finger reel for 21’ swather

Dual ext. for 9500/9600 combines, bolts onto 10-hole combine rims to 9-hole dual rims

(2) final drive ext. for 9500

Ladder ext. for JD 9500

TRS combine chopper for 9600, regular cut

MOTORS & PUMPS

Electric motor, 60 hp., 1770 rpm, 364T frame, 3 phase

Reliance electric motor, 5 hp., 3500 rpm

Misc. gas motors

Asst. hyd. orbit motors

Asst. electric motors

Wisconsin gas motor w/gear case

Electric motors & throw switches

Electric motor, 2 hp., 1 phase

Motor, 1 hp., 3 phase, low speed

Motor, 10 hp., 3 phase, low speed

Rewound fan motor, 10 hp., 3 phase, high speed

Greyhound engine, 11 hp. gas

Honda motor, 11 hp.

Gorman-Rupp water pump, 6", 540 PTO

Gorman-Rupp water pump, 3", Isuzu diesel engine

Lombardini diesel engine pump, set up for 2" hose

Parma water pump, 10", 10 hp., 12' setting

Torrent floating water pump w/gas engine

Water pump, 2", 6.5 hp. gas

Water pump, 3" w/hoses

Water pump, 2", Subaru 4.5 hp. motor

Trash pump, 4", Honda motor

Trash pump, 3", Honda motor, housing cracked

(2) Fuel transfer pumps

FARM SUPPORT ITEMS

(4) Aluminum truck/trailer storage boxes

(4) 250 gal. totes, rinsed & ready

250 gal. plastic chemical tote

(2) Blackbird boomers

(3) Zon boomers

(2) 8' pickup rail toolboxes, New

Weatherguard toolbox

(3) Trailer house axles

Wire fence stays

(4) Rolls heavy fence wire

(2) Rolls steel fence wire

(2) Rolls aluminum wire

Spool 1/2" steel cable, New

Roll of 12-3 electric wire

Pallet Fleet Farm 15-40 diesel motor oil in 5 gal. buckets

MISC. ITEMS

(39) Pieces split rail fence

Misc. 12' dimensional lumber

Seamless siding machine for D4 or straight 8

(20) Pieces 8' metal panels

I-beam, 6"x20"x24-1/2'

I-beam, 10"x10"x11'

(3) I-beams, 20'x10"

(8) I-beams, 27'x14"

(2) I-beams, 33'x18"

Misc. electrical panels

Wood wagon wheel, original

Linemans belt & (3) sets climbers

GI gas cans & ammo boxes

(6) School lockers

Overhead garage door, 22'x14', w/brackets

Single stall garage door, w/hardware, 9'x7'

Fiberglass basketball backboard w/(2) hoops

Approx. 300 pieces of 1/2" rebar

Coupler hitch deer carrier

(3) Pallets glass block, 12"x12"x4"

(10) 10' 2-way tower sections

Flashing traffic signal, 4-way w/controller

Stove pipe, 14' of 6", Class A

Airport baggage trailer, 5’x12’, drop sides, tarp

(107) 53” pallet racking beams

(10) 8-1/2’ pallet racking beams

Pallet heavy gauge electrical wire, several hundred feet

Dorm refrigerator

AGIRON WEST FARGO EVENT

800.726.8609 or 701.237.9173

TERMS: All items sold as is where is. Payment of cash or check must be made sale day before removal of items. Statements made auction day take precedence over all advertising. $35 documentation fee applies to all titled vehicles. Titles will be mailed.  ND Sales Tax laws apply. Canadian buyers need a bank letter of credit to facilitate border transfer.

Equipment Check-In & Viewing

Monday, July 21 through Friday, July 25 from 9AM - 5PM and Saturday, July 26 from 9AM - 2PM.

Due to the large amount of equipment coming in, it will be not possible to check equipment in on Monday, July 28, Tuesday, July 29 or on Auction Day! 

All major equipment sold on the live online auction must be checked in by Friday, July 25.

Buyer's Please Note:  Items will be moved after Friday, August 1 at 5:00PM.  Beginning Monday, August 4 equipment can be picked up Monday - Friday from 8:00AM -5:00PM with arrangements.

Any items not removed by Friday, August 8 will be subject to storage fees of $25.00 per item, per day.  Additional loading fees will apply after Friday, August 8.  Removal by appointment only and upon payment of storage & loading fees.